Make A Flip Fold Card
You can make a flip fold card using the FREE SVG cutting file in our Free Resource Library. This interactive, all-occasion card will be sure to Wow its recipient.
Flip Fold Card
When the card is closed, you will see the front of the card with its frame around the back side of the flipped center piece. You can decorate this with the included lattice label piece. Or you can use one of the included frames, or solid label pieces as decorations. When the card is open, the center piece flips to the back, and you see the sentiment, or a stamped image you have added to that side. This is really a fun card!
Supplies Needed to Make the Flip Fold Card
Please note: Some affiliate links may be used in this post. I am affiliated only with products that I use. When you purchase products using my affiliate links, it does not cost you any more, but I will share some commission. Thanks!
Patterned Cardstock of your choice. Double sided Patterned cardstock is best. I used paper from this paper pack.
Coordinating Colored Cardstock for lattice, frames, or label layers
Electronic Cutter (I used Pazzles Vue)
SVG Cutting File from our Free Resource Library
Art Glitter Glue Dries Clear Adhesive
Free SVG cutting file from the FREE Resource Library
Cutting the Card
Import the SVG file for the card into your cutter software. If using Cricut Design Space, be sure to select the score lines, and change the lines to be Scored rather than cut. Select the card base and the score lines, right click, and select Attach. If using Brother Scan N Cut, be sure to resize the entire selected design to 11.481″ wide x 11.099″ high before cutting. The finished folded card will be 5.5″ square.
Flip Fold Card Cutting Pieces
The paper that I used is printed only on one side. If you are using this or something similar, with a printed design only on one side, use the printed side for the inside of the card. Use the extra panel piece, shown above in light green, to make the front of the card match the pattern on the inside of the card. Since the back of the paper is white, a white frame will remain on the front of the card, surrounding the flipped card image. Extra pieces are included for you to use as you prefer for decorating front or back pieces of the card design. Cut the pieces in colors of your choice. If you will be using stamped sentiments, add those to the panels before assembling.
Assembling the Flip Fold Card
Fold the base card on the score line, and crease with a bone folder. The score line on the left is a valley fold. The score line on the far right is a mountain fold. The remaining score line is a valley fold. Gently flip the center right label piece and fold it to the back. This part of the card will be facing up when the front part of the card is closed over it. When you pull the right side of the card to the right, the center panel should flip, revealing the sentiment you have added there. Close the right edge of the card towards the center, and that center piece should flip back to a decorated panel. If you decorated with the lattice piece, for example, then that lattice piece will be showing through the window on the front of the card when it is closed.
Flip Fold Card closed with lattice design showiing through the window.
Open the card, and you should see the sentiment you added to the inside of the card instead of the lattice. If you didn’t add a sentiment, the printed pattern would be showing on this piece. Placing a solid colored panel here would make it easier to stamp a sentiment. You may also add a frame around the window on the left inside of the card.
Inside the Flip Fold Card
Glue the decorative panels you have chosen to the base card. There is room on the center panel for you to write a message. Or you can add additional embellishments. These will show only when the card is open.
Creating Your Own Custom Flip Fold Card Design
If you are interested in creating a Flip Fold Card Design with a different flipping shape, see the Video tutorial I posted on how I created this design using the Make The Cut software. I would love to see a photo of your finished project!
Completed Flip Fold Card
Get the FREE SVG Cutting File for the Flip Fold Card
To get the free SVG Cutting file for the flip fold card, go to the resource library and enter the password. I have included the password at the bottom of most of my newsletter emails. If you have subscribed, check your most recent email to find the password. If you have not yet subscribed, I hope you will, so that you can be informed as I add more new projects to the Free resource library! Once you are in the Free Resource library, right click on the file name of the project. Next, select Save Link As or Save Target As. Now, save the file to your computer. Next you will need to unzip the file. To do that, double click on the file you saved to your computer to open it. Then, click on Extract All. Now, open your cutter software, and import the SVG file. Select the pieces you wish to cut. Load your paper onto the cutting mat. Do a test cut to find the best settings for you machine, and cut the pieces you need. Repeat with the pieces you want to cut from a different color paper.
Love,
Julie, cuttercrafter.com
>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<
This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.
If you already have your password, enter the resource library here.
Make an Oval Accordion Card
Make an oval accordion card.
You can make this oval accordion card using the FREE SVG cutting files posted in our Free Resource Library. Make it using as many or as few panels as you like. There are several layers which you can use for the center of each panel, or you can use the base oval for trimming a photo to fit. Add photos and/or sentiments, or journaling to the front and back side of each oval as you prefer. The card’s height is 6″, but you may adjust the size according to your needs. You may even add lots of panels to create a mini album. The card folds flat for mailing, with a complete size of 4.5″ x 6″ . It stands alone for display.
Supplies Needed to Make the Oval Accordion Card
Please note: Some affiliate links may be used in this post. I am affiliated only with products that I use. When you purchase products using my affiliate links, it does not cost you any more, but I will share some commission. Thanks!
Digital Paper from Pazzles.
Medium Weight white Cardstock for printing digital papers
100#– 110# white cardstock for card base pieces
Colored Cardstock for oval layers
Electronic Cutter (I used Pazzles Vue)
SVG Cutting File from our Free Resource Library
Pop Dots if desired for layers
Art Glitter Glue Dries Clear Adhesive
Software Requirements
The SVG files are suitable for use with Make The Cut, Sure Cuts A Lot, Pazzles InVue software, Cricut Design Space, Brother Canvas Workspace, Scan N Cut, Inkscape, Silhouette Studio DE, Illustrator, CorelDraw, and any other software that will import SVG files. Also included is a PDF file containing assembly instructions.
Paper Choices
Decide how many panels you want for your card. Then select papers for any layers that you wish to use. Print any digital paper you plan to use for the rectangular frame on each panel. You can use printed papers, or solid. If you are using photos, trim them to the size of the largest oval in the file, or to any size that you prefer. There are several layers to choose from. You can use some of the panels for titles, sentiments or journaling. Select heavy cardstock for the base panels, as they will stand alone better, and be more sturdy for displaying. Use lighter weight cardstock for the oval layers. You do not want these to be too heavy to put unnecessary weight on the upper and lower hinges on the ovals. You may use pop dots to give more dimension to any of the layers.
Cutting Instructions
The cutting files include a single panel for the left side of the base card. The left and center panels are the same. Make multiples of the center shapes for as many extra panels that you need. The panel for the end of the right side of the card is different from the others, as it has no folding tab for the right side of the card. You need only one of these panels. This panel is rotated in the cutting file so that it will fit better on the cardstock for cutting. You will need an extra printed layer for the front of the card, if you plan to close it flat. Also consider cutting extra oval layers if you plan to use the back sides of the ovals.
Score Lines
The score lines for the side tabs are better created as shallow solid lines, as opposed to cut dashed lines. You can use a scoring tool, embossing tool, engraving tool, or the blade set to a low extension, and cut at a low cutting pressure. You do not want the blade to cut through, but rather to just scratch the surface so that the tabs fold more readily.
Basic panels for oval Accordion Card
Oval Accordion Card Assembly
It is easiest to decorate the base card pieces before folding. Use glue around the edges of the back side of each layer. Next glue the layers onto the base card. Make sure the rectanglular layer does not overlap the score lines.
Decorated Panels
After you have decorated the panels, fold the flaps. The panel on the left has the flap folded up with a valley fold. The center panel has the flap folded back with a mountain fold. If you have more panels, the folds will alternate. The panel on the right does not have a flap. Next glue the left edge of the center panel over the flap of the panel to its left. If you have additional panels, repeat this process. Glue the final panel over the flap of the panel to its left.
Panels Glued Together
Folding the Card
Use a bone folder to crease the panels in the direction of their folds. Between the first two panels there is a valley fold. Between the last two panels there is a mountain fold. Now, place glue on the tiny square tabs between the ovals and the outer frame. The oval on the left comes over the valley fold to meet the the oval to its right. Glue the tab to the back of the neighboring oval, and fold the tab with a mountain fold. The tab on the center oval goes behind the mountain fold of the base card to connect to the back side of the oval to its right. Make a valley fold on this tab. The ovals should end up touching each other. Hold the tabs in place until the glue dries.
Glue oval tab to neighboring oval.
Fold the ovals in the opposite direction of the folds in the base card. Then burnish creases.
Connecting Oval Tabs
Fold the card flat. The tabs at the top and bottom of each panel should fold naturally as you help the base card and ovals fold correctly.
Card Folded Flat
Burnish the folds so that they are creased well. Now you may decorate your card with additional embellishments if you would like to do so. I might add a 3D flower from my collection, depending on who I plan to give it to.
Oval Accordion Card completed
Love,
Julie, cuttercrafter.com
>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<
This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.
If you already have your password, enter the resource library here.
Why You Might Need a Brother Scan N Cut
Brother Scan N Cut
Unique Features of the Scan N Cut
Here are some reasons why you might need a Scan N Cut electronic cutter. It has a built in wide format scanner. The scanner allows it to cut around stamped or printed images. No computer or Internet connection is necessary. Scraps can be used efficiently. It can fill fonts with solid or patterned fills to be drawn or embossed. Free design software is available for download to your computer. You can use your SVG file collection with this machine.
Wide Format Scanner Built into the Scan N Cut
Do you need a wide format scanner? If you do, then the Brother Scan N Cut 2 might be for you. With it you can scan a full 12″x12″ image, save to a USB thumb drive in JPG format in up to 300 DPI resolution. Wide format scanners can be extremely expensive. This wide format scanning feature alone makes the purchase of a Brother Scan N Cut a worthy investment. The built in scanner in the Brother Scan N Cut machine allows you to scan a design into the machine, and then have the machine cut around the printed design. The machine knows exactly where your images are on the mat to create a perfect cut. This is a great option for scrapbookers who create layouts in up to 12″x 12″ size, as they can scan their completed pages and share them with others online or even have copies printed.
Cutting Scraps with the Background Scans
The background scanning feature is genius. You can put your different colored scraps down on the mat. Then do a background scan . Finally, place your cutting designs exactly where you want them to cut. There is no guessing about where the shapes will be cut. You can make use of even the tiniest of scraps without worrying about where to place the designs on the screen.
Cut Around Stamped or Printed Images
You can stamp an image with a rubber stamp, scan it into your Brother Scan N Cut, and the machine will cut around the stamped image. No additional software is necessary. This is a great option if you want to select the Direct Cut method on the machine to cut around the outside of the stamped shape. Quick and easy. You will need to play a bit more to master the machine’s more advanced Scan to Date option.
No Computer or Internet Necessary for Using the Scan N Cut
The Brother Scan N Cut can operate fully independent of a computer. There is with no need of expensive cartridges. With the addition of the optional wireless card, you can connect from the free Canvas software on your computer to your Brother Scan N Cut. This machine is an excellent option for those who do not have ready access to high speed Internet service. It can be operated without a computer, and without Internet service.
There are hundreds of cutting designs built in to the machine, ready to edit and cut. There are also hundreds of free cutting projects posted online at the Brother site that can be saved to a thumb drive. Then you can cut them on this machine. My grandchildren preferred this machine over all the others in my studio. I worked on my computer and cut to my Pazzles or Cricut Maker, and they were very content to cut their projects on my Scan N Cut without help. By the way, they are ages 11, 9, and 7.
Free Design Software
Canvas Workspace
The Brother Scan N Cut can use SVG files created in the free Canvas Workspace software, or any other software that provides an SVG file export. SVG files can be opened in the Canvas Workspace software and saved in FCM format, or it can be sent directly to the Brother Scan N Cut machine to cut, via the wireless connection. Or you can save your SVG and FCM cutting files on a USB thumb drive, and plug it directly into the machine’s USB port. The built in software allows you to load the design, edit it to the perfect size, and cut the design.
Drawing with Pens and Fills
Another unique feature of the Brother Scan N Cut is the option to draw text or a shape with a pen or embossing tool and fill it automatically with a solid fill or design. This can be done with software on other cutters, but this feature is actually built in to the Brother Scan N Cut machine.
SVG File Compatibility
The Brother Scan N Cut is compatible with third party software. Vector art programs such as Illustrator, CorelDraw, Inkscape, Sure Cuts A Lot, Make The Cut, Pazzles InVue, Silhouette Studio, Funtime Scrapbooking, and others that can be used to create SVG files that can be cut on this machine.
Amazing Cutting Pressure for Heavy Media
In addition to its unique features, the Brother Scan N Cut boasts cutting specifications that rival top-of-the-line cutters in the home crafting market place. At the same time, its price is comparable to entry level cutters. Its 1250 grams of cutting pressure is exceeded only by a couple of other more expensive cutters in the home crafting cutter marketplace. With this pressure, it can cut through most any media up to 1.5mm in thickness.
Hints to Get Started with the Scan N Cut
Protect your Mat
Since the Scan N Cut is a heavy duty cutter, it can cut straight through your cutting mat. The mats are expensive. So spare yourself some agony and expense by setting your cutting pressure to -1, and don’t change it. Change the blade depth instead.
After you order
Check this document while you wait for your machine to arrive. Find a home for it.
Go to the Brother site. Download all of the documents pertinent to the Scan N Cut. There is one chart in the manual that I referred to constantly. It includes suggested blade settings for a variety of different media. I printed a copy of it and attached it to my machine for quick reference.
Browse through the hundreds of free cutting projects at the Canvas Workspace site. Download the ones you like. There are new free projects posted there regularly.
Once your machine arrives, do some test cuts.
Go for it!
If you need a wide format scanner, an electronic cutter that does not require the use of a computer or the Internet, or a powerful craft cutting machine at an affordable price, the Brother Scan N Cut may be for you! Once you get your Scan N Cut, be sure to try cutting some of the projects included in our Free Resource Library.
Would you like to have some FREE SVG cutting files for a variety of projects?
Check them out in my FREE Resource Library.
>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<
This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.
If you already have your password, enter the resource library here.
Thanks!
Julie, cuttercrafter.com
PRIME DAY DEALS FOR CRAFT LOVERS
Prime Day Best Deals for Crafters
Best Prime Day Deals for Crafters to Check Out on Amazon.
Amazon Prime Day
Amazon Prime Day is Monday, July 15-16, and Prime Day is a great event for getting the best prices available all year. If you haven’t heard about Prime Day before, it’s a once-a-year HUGE sale at Amazon — like, 100,000 items get put on sale. It’s bigger than Black Friday, but it is just for Amazon. I’m a Prime member (and you have to be to get these deals) and I’ve been shopping Prime Day for a while now. But I recently learned that it is possible to find out in advance what things are going to go on sale. I looked and I found some really interesting DIY & CRAFT deals. I’ll be adding to my shopping list for myself and my family — and I thought you might like to know about these deals, too. But be warned — it’s addicting.
While your other family members are finding lots of important tools and gadgets, this is a great time to anticipate major crafting needs for the coming year. I have posted links to crafting tools that I use the most.
What to Expect, How to shop, and Get Ready
- Check out the amazon.com/primeday page every day to stay up to date on Amazon’s best deals and offers of the year.
- Don’t forget to sign up for Prime, as Prime Day deals are exclusively available to members!
- You can try it for FREE for 30 days! amazon.com/tryprimefree They also have a special deals for students.
- Download and install the Amazon App. In the top left app menu, tap “Today’s Deals”, then the “UPCOMING” tab. Find a deal that you want and tap “Watch this deal” to get notified when it starts.
- Make a Wish List and watch for email notifications when items go up for sale. You can use my list as a starting point. Wouldn’t this make a great crafter’s Christmas in July shopping list?
Links to Prime Day Deals for Crafters
Machines
Pazzles Inspiration Vue Cutter – See my review here.
Silhouette Cameo 3 – Look for low prices with newer model coming out at the end of the year.
Gemini Die Cutting/Embossing Machine Great price for a power machine! I ordered one, plus the plates for the Gemini Jr to use with this. See my review here.
Scan N Cut
Scan N Cut2 – Great Clearance options.
Scan N Cut DX-Latest cutter from Brother. See my SNC review here.
Brother SNC Universal Pen Holder Allows you to use standard pens in your new or older model Scan N Cut machine.
Scan N Cut Standard Mat for CM models or SNC2
Scan N Cut Online Activation Card for WiFi connection This is not needed for the newer DX SNC models.
Cricut
Cricut Maker New LOWEST price ever! Cricut Explore vs Cricut Maker-Review.
Cricut Explore Air 2 Bundle new low price.
Cricut Cutting Mats – Standard Grip
Cricut Cutting Mats – Variety Pack
Cricut Easy Press 2 9″x9″ Higher heat options for Cricut Infusion projects
Cricut Easy Press 2 12″x10. Necessary for larger Cricut Infusion projects.
Cricut Ultimate Fine Point Pen Set Assorted
Cricut Rotary Blade Kit– See my review here.
Nicapa Mats for Cricut– Set of Three
Crafter’s Companion Products – Lots of their products are for sale at a discount for Prime Day!
Tools
A4 LED Ultra Thin Light Box Tracer – Not quite as bright as the Cricut Bright Pad, but the price is right and it works well for weeding vinyl.
Crafter’s Companion NEW! Professional Guillotine Large 13″ long, compact and light weight. Great for trimming! Side arm extends 13″ . Metric and Imperial measurments, scoring stylus, and scoring grid.
Temperature Gun – check the actual heat of your iron, heat press, heated project, etc.
Heartfelt Creations Deluxe Flower Shaping Kit I use this kit for shaping my 3D flowers. See my blog tutorial and my video tutorial for shaping paper roses.
Spellbinders Tool In 1 Great for brushing the tiny pieces out of intricate cuts.
Tim Holtz Stamp Platform I love this for getting perfectly stamped images.
Sizzix Extended Cutting Plates
Candle Warmer – for shaping thin foam into flowers
Hand Engraving Tool – Insert in cutter pen holder. You may need to wrap tape around it to fit in the pen holder.
Dog Tags for engraving Engrave a blank tag for your pet using your engraving tool with your cutter!
Three Hole Punch – great low price. I use this regularly for organizing craft items in binders.
Pink Tool Set– Every crafter needs their own set of tools handy for everyday use. I got these. My hubby doesn’t like pink, so I might be able to keep them around for awhile.
Lighted Magnifying Glass – great for callibration tests on cutters.
Adhesives
Dries Clear Adhesive – My favorite craft glue that dries quickly, and dries clear. Love the fine tip applicator.
Bulk Dries Clear Adhesive Refill – Use this to refill your smaller glue bottle with fine tip applicator.
Alenes Tack It Over and Over – Mix 1 part glue to 2 parts water, and apply to cutting mats using a foam paint brush for the least expensive way to make them sticky again.
Zig 2-Way Glue – Most convenient way to restick cutting mats, and very effective.
Mini Hot Glue Gun – Great for making 3D paper or foam flowers
Mini Glue Sticks – Refills for Mini Hot Glue Gun
Paper and Cardstock
See my Blog Post on the Best Paper for Crafting here.
80# white cardstock Excellent cardstock for print and cut projects. The printer can handle it, and it cuts well.
100# white cardstock Great for cutting popup cards and stamped flowers for coloring and shaping into 3D flowers.
110# White cardstock Great for 3D projects
12″x 12″ Assorted Color cardstock 150 sheets Variety of weights, most between 65# and 80#
Laser Color Copy paper – for use with Infusible Ink products from Cricut
Translucent Vellum 36# Cardstock – great for embossing
Foam
Thin Foam Sheets for Flower Making – 1mm thick, assorted colors, 24 pieces, 9.8″ square.
White Flower Making Foam .8mm thick, 30 sheets
Thin White Foam Paper for Flower Making
HTV and Sublimation
Heat Transfer Vinyl (HTV)
15″x 15″ Heat Press If you do a lot of Heat transfer vinyl on garments, you need a heat press. The size is right on this one, and the best price I could find.
15″x 12″ 8 in 1 Heat Press combo – This allows you to create your Heat Transfer vinyl projects, Cricut Infusion Projects, as well Sublimation projects, including attachments for mugs, hats, dishes, etc. This is the one I have. Check out this bundle that has all you need to get started with Sublimation, or purchase items separately.
Epson WF 2760 Printer – Use with sublimation ink.
Sublimation Ink for Epson WF 2760– Print designs on sublimation paper, and transfer to project blanks
Foiling
Brother Monochromatic Laser Printer – for printing toner sheets to foil with deco foils and laminator.
13″ wide Thermal Laminator – For general laminating and for use with toner sheets and deco foil
12″ Deco Foil – for use with laminator
Gemini Foil Press – For use with Gemini Jr. ( or full size Gemini with Extender plate) and Hot foil – See my tutorial for foiling.
Gemini Foil Bundles – For use with Foil Press, NOT for laminator.
Electronics
SanDisk 54Gb Flash Drive This will work to transfer SVG files to the Scan N Cut. I keep a dedicated thumb drive for that purpose.
Portable 4T External usb Drive – Great for storing backups of all of your printables, cutting files, and fonts collections
Instant Pot Duo 6 qt. – I love my Instant Pot. I can do a lot of crafting while it does the cooking!
Blendtec Blender – My favorite Smoothie Maker at a great price! Prime Day price updated at checkout.
Flameless Candles for those lantern projects
Aromatherapy Essential Oil Diffuser – Create a relaxing and healthy crafting environment
Echo Input – Alexa sent to your computer speakers to add Instant music for your crafting environment.
Pens, Markers, Pencils
Ultra Fine Micro Line Pens set of 16 I couldn’t resist purchasing another set of these at this low price.
Sharpie Fine Point pen set of 24 colors Can you even have enough Sharpies? These fit in my pen holders to draw with my machines.
Derwent Watercolor Pencils set of 24 now at a reduced price. I love these for coloring my 3D flower creations.
Artists Choice Watercolor Pencils set of 72 More colors in this set, but the colors are not as intense as those in the Derwent set.
Set of 88 Alcohol Dual Tip Markers with case.
Prismacolor pastel color sticks
48 Colored Pencils– less expensive, but less dense pigment than Prismacolor colored Pencils.
136 colored pencils – Best deal
Arteza Real Brush Pens set of 96 with case.
Art Media
Prills – Use to embellish centers of 3D flowers
Stamens – Use to embellish centers of 3D flowers
Ultra Fine Glitter This is what I use with the Scor-tape Sheets to make patterned glitter paper. See my tutorial here.
Modeling Clay, 24 colors plus tools – Tools can be used to shape clay, fondant, and/or 3D flowers.
Arteza Watercolor Premium Artist Paints Set of 24 Colors
Art Supplies for Children – Great kit, including crayons, colored pencils, watercolor paints, pastels, tools, etc in a wood case when children want to craft with you.
Stamp set-nice for children
Tim Holtz Distress Inks – Excellent for adding color to foam flowers!
Stencil Brushes – Great for “Hot Mess Canvas” painting.
See EVERYTHING available during Prime Day here
Note that you need to be a Prime member to take advantage of these deals. But the good news is that Amazon Prime offers a free 30-day trial to those curious about trying the service. To access it simply click this link and follow the on-screen prompts. This is how I ended up with Prime — I signed up for a free trial and stuck around because of the free 2-day shipping and free movies. Tip: Anyone with a valid .edu email address can sign up for a 6-month free trial for Amazon Prime Student here.
Tip: I recommend you click “Watch Deal” for anything that interests you. Then you can monitor your deals on this page.
I will add to this list as I find more deals I think could help you. Set your alarms and have fun shopping! Let me know what you scored.
Learn to Use Your New Crafting Machines
Check back here, at Cuttercrafter.com for tutorials and cutting files to use with your new crafty purchases. You will find some FREE projects to try in our Free Resource Library.
Would you like to see some of my FREE SVG projects? Check them out in my FREE Resource Library.
>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<
This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.
If you already have your password, enter the resource library here.
Best Software For Designing SVG Cutting Files
What is the best design software for creating SVG cutting files? There are a number of design software choices available. Learn which is the best for you. The most important factor in your design software choice is that it works with your cutter. The design software does not have to have drivers to cut directly to your cutter. But the design software does need to have options to export designs that will work with your cutter. So the cutter you are using, and its software requirements will be a huge factor for you in your design software choice.
Cutter Software
Software for SVG Designing
Cricut Design Space
Cricut Design Space
Cutters are usually shipped with software that works with the machine. But not all software is created equally. Some machines come only with the drivers necessary to make the machine work. This is true with many professional vinyl cutting machines. Other cutters come with some very basic free design software, such as Cricut Explore and Cricut Maker. Software required to work with these Cricut machines is Cricut Design Space. Design Space allows you to save your designs on their Cloud, but you cannot save them to your computer or export then for use with other cutters.
You may be satisfied with cutter software that allows you to use only designs provided by the cutter distributor for awhile. But eventually you will want to spread your creative wings to make some of your own designs. Some companies do not provide software with their cutters. They prefer to give you a option of purchasing the software of your choice. In this case, you need to make sure that the software you purchase has drivers for your particular machine.
Brother Canvas Workspace
Brother Canvas
Some cutter software allows you to open or import files that you or others have created. But they provide only basic software features. They have very little in the way of creative design and editing tools. For example, Brother has provided the free Canvas Workspace software for Scan N Cut and Design N Cut users. It includes basic design features. But you will likely need to use what is called “third party software”, software made by another company. This third party design software can be used to create your cutting projects. In order for third party software to work with your cutter, it needs to have the option to export designs that will work with your cutter.
Software Import and Export Options
Silhouette Studio
Some cutters are provided with full featured design software. This software allows you to import, customize, and create cutting files. But the software may not allow you to export your work in formats that can be used with other cutters. For example, the free basic version of Silhouette Studio is excellent design software, but importing and exporting files in other formats requires paid software upgrades. Being able to export cutting files from your cutter software will be important if you want to use your cutting files with more than one cutter, or if you want to share or sell your files with someone else who uses a different cutter. Be sure to check the import and export options of the software you choose. Another thing to keep in mind is that Silhouette Studio does not allow the export of purchased designs from their online store in SVG format.
Cutters with Full-Featured Design Software
Finally, there are some cutters that are shipped with full-featured design software, that allows you to import and export cutting files. For example, Pazzles includes full-featured design software with the purchase of their cutters. Their software, InVue, (which may be purchased separately from a machine) allows you to import, create, customize, and export your cutting projects in SVG format. It included basic and advanced design functions. Therefore, this software serves as an excellent low-cost, third party cutting software.
While there are excellent cutters that do not have these important software options, it is essential that you consider creating your designs in software that does have these options. Therefore using additional design software may be necessary. In this case, make sure that the software you have chosen for your design work will work with the software provided with the machine you plan to use.
Design Software Options
The best time to evaluate software options is before you make your cutter purchase. This gives you more freedom as you consider design software options. So if you are looking into purchasing a new cutter, now is the time to consider your design software options. Every design software has a learning curve. So once you select a design software, you will need to stick with it for awhile. Learn all of the basic functions in the software that are needed for creating projects for your cutter. Then you can learn to use many of the advanced features in the software. Have patience as you learn.
Free Design Software
Inkscape
Inkscape
Inkscape is open source software that is free. This software has no plugins for cutters, so it is used strictly for designing. It does have many import and export options. Many cutter crafters use Inkscape for creating their cutting files, then export their designs in a format that can be imported into cutter software. Most cutter software will import SVG or DXF files that Inkscape can export.
Learning Inkscape
The down side to using Inkscape is finding adequate support for using it for cutting purposes. There are many more tutorials available covering Inkscape features today than there were in past years. Inkscape is so full of features for designers of all types, that finding the tools needed specifically for designing cutting files can be hard to find. The best course I have found for learning to use Inkscape for designing cutting files is one produced by Jennifer Maker called Cut Above SVG Design Course
Affordable Design Software for Sale
Pazzles InVue Software
Pazzles InVue is the most affordable third party design software for sale. It is excellent software for designing SVG cutting files. It cuts directly to the Pazzles Inspiration and Pazzles Vue cutters.InVue also allows for importing and exporting SVG and WPC cutting files, making it a great option to use as third party software for use with cutters that have more limited design tools.
Learning InVue
The Pazzles Craft Room offers excellent video training for using this software. You can find some free video tutorials for using this software on my YouTube channel. I also offer free Cutter Software support for this and most cutter software at the Cutter Software Facebook Group (Join to access free files and discussion group.)
Some third party design software will cut directly to a number of different cutters. This is handy, as you can design and cut your projects from the same software.
Sure Cuts A Lot (SCAL)
The most up-to-date of these software options is Sure Cuts A Lot version 5 . You can download a free trial of this software for 15 days to see how you like it. Even if you cannot cut directly to your particular cutter, you can still create your designs in this software, and export your projects in most common formats, including SVG, SVG for Cricut, and Brother FCM. It can also import a large number of embroidery file types.
Sure Cuts A Lot Cutter Software
Learning Sure Cuts A Lot
ScrappyDew has an excellent course called SCAL Classroom covering how to use Sure Cuts A Lot, including a User’s Manual. There is a special offer for a discount for this course when you purchase the software.
Make The Cut (MTC)
Make The Cut Software
The Make The Cut software is excellent software for designing SVG cutting files. This software is available for purchase online. You can download the free trial version from this site, and use it indefinitely. The trial version does not allow SVG export or printing.
Make The Cut is not cloud-based. It is extremely important to protect your user registration number, in case your computer crashes. Save your entire Make The Cut! directory as well as your registration number to a thumb drive or a CD, in case you need to install Make The Cut to another computer. Copy everything from this folder C:\Program Files (x86)\Make The Cut! to the thumb drive. Then you can plug in the thumb drive to a new computer and copy these files to the new computer.
Make The Cut is full featured cutting software that will cut directly to many different cutters. It includes many advanced design features. The software imports and exports many different file types. There have not been updates to this software in several years, so plugins for newer cutters are not available. But the software is still quite competitive in the market for those designing SVG cutting files. You can create your own cutting files, or customize or edit designs that you have. Then you can select all (ctrl+a) and export as SVG (Ctrl+Shift+S). These SVG files may be imported into your favorite cutting software.
The User Gallery in Make The Cut is partially functional. You can still download thousands of designs from that Gallery. If you own Make The Cut, see this document to learn how to Retrieve your registration key by Sandy McCauley. She has also made some of the archived gallery files available for FREE download:
Files contributed by Dave (AKA Berry One) Dave contributed files primarily in MTC format. There are a few SVG files among his collection that even those who do not own Make The Cut can access.
MTC Gallery Rescue by User Paul Zingah These are primarily files in MTC format with PNG thumbnail images.
Learning Make The Cut
Support for Make The Cut software is available in the free User’s Manual as well as at the Make The Cut Forum, at the free MTC-Tuts Group (join to access free tutorials and cutting files), and at my YouTube channel.
Popup Card Studio
Those interested in making popup card designs will appreciate the option to copy and paste designs from the Make The Cut software to its companion software, Popup Card Studio (PCS). Popup Card Studio is no longer for sale. However, those who have purchased this software in the past can still use it to create popup cards. There are free YouTube tutorials for creating popup cards using Popup Card Studio on my YouTube channel. The user gallery is no longer functional. You can download an archive of most of the designs that were available in the PCS user gallery in SVG format. Even if you do not own Popup Card Studio, you may access these SVG files for making nearly 100 different popup cards.
Not So Affordable Software For Designing SVG Cutting Files
Adobe Creative Suite
Adobe Illustrator
Illustrator is the professional vector design software. This cloud-based software includes tools for a wide variety of design professionals in many fields. Hence, it is quite complicated, and difficult to learn the specific design tools we need for designing SVG cutting Files. Illustrator does not offer plugins for direct cutting to cutters. But the files created in Illustrator can be exported for use with other cutter software. Illustrator became popular among crafty cutters who use MAC computers, when most cutter software did not offer support for MAC. Now it is more common to find cutter software that includes MAC support.
Learning Illustrator
Those aspiring to become professional designers may want to dive in to learning to use this software. Comprehensive support for cutter users is severely lacking for this software. I do recommend that if you want to be a design professional, that you get the entire Adobe Creative Suite, as you will likely need more than just Illustrator. I find that I use Adobe Photoshop and Acrobat Pro as much or more than Illustrator. If you plan to tackle Illustrator for designing SVG cutting files, I highly recommend Jennifer Maker’s Cut Above SVG Design Course . Jennifer is extremely diligent to provide personal help for her students in learning to use advanced software tools to create some amazing cutting projects.
Corel Draw
CorelDraw
The CorelDraw suite is another expensive vector design software that imports and exports files in many formats. Many professional cutters use this software, especially those who work with laser cutters and wood cutting machines. However, there is not much support for home cutter crafters using CorelDraw.
Favorite Features of CorelDraw
There are only a couple of features that I use in CorelDraw for my design work. My favorite is the Word Envelope that automatically fills a shape with text. See my video tutorial on how this works. The other feature in CorelDraw that I use is their TTF file export. I use this for creating fonts. CorelDraw does not provide plugins for cutting to our craft cutters, but many laser and CNC machines are shipped with plugin software that works with CorelDraw. If you have a machine that requires the use of CorelDraw, then you will need to invest in this software.
Design Software for Cricut Machines
Your older Cricut machine did not come with design software. You learned to use designs available on cartridges to create some amazing scrapbook pages, cards, 3D projects, and decorations for events. But there are times that you have some very creative ideas that you would like to try with your cutter, and you cannot find exactly the right cutting files in your cartridge collection. So perhaps it is time to learn to use cutter software so you can bring those creative ideas to life.
Cricut Expression
There are some older software versions that work with your older Cricut, including Cricut Craftroom, Make The Cut 4.1.0 or earlier, Sure Cuts A Lot 2.0, and FairyCut. But those are no longer being produced, and Cricut Craftroom is being closed. If you happen to have one of these, it would be a good idea to start learning to use it. Even very basic software can be used to create some amazing projects. The latest versions of Make The Cut and Sure Cuts A Lot allow you to use the latest and greatest software features, and transfer your designs to the older software so you can cut to your machine.
Cricut Upgrades
After Cricut Craftroom closes in mid-July, 2018, you will need to make some decisions. If you have a huge collection of cartridges to use with your older Cricut, you might want to consider upgrading to a Cricut Explore or Cricut Maker. Cricut Design Space, which is required for using these machines, does allow you to register your cartridges. Hence you can use all of your cartridge images and fonts on the newer machines. Cricut Design Space does have some nice design features to help you use your cartridge design collection more creatively. The software also allows you to import images and SVG files from other sources. For more information on how to use SVG files in Cricut Design Space see my post on How to Use SVG files in Cricut Design Space.
Do You Need a New Cutter?
You may need a new cutter if your creative needs have outgrown the features available with your current setup, or if support for your cutter has been discontinued.
Discontinued Cutters
If you decide you do need a new cutter, it is important to consider your cutter software needs as well. Take some time to research the options available to you. An electronic cutter requires some kind of software to drive it. You need to make sure that the machine and software combination suits your needs. If you already have a favorite software for designing SVG cutting files, will it work with the cutter you are considering?
Note: I use some affiliate links in this post only with products that I use. When you purchase products using my affiliate links, it does not cost you any more, but I will share some commission. Thanks!
Julie
Would you like to see some of my FREE SVG projects? Check them out in my FREE Resource Library.
>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<
This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.
If you already have your password, enter the resource library here.
