decoration decoration decoration
decoration
leaf leaf leaf leaf leaf
decoration decoration

Baby Crib Popup Card FREE SVG

A Baby Crib Popup Card FREE SVG file is available for download now in the free Resource Library.

Do you need a nice card for a baby shower or gift? This lovely card is decorated for a girl, but it could just as easily be decorated suitably for a baby boy. The card folds flat for delivery. When it is opened, the crib pops out. There is plenty of room inside for you to write a message and sign the card. You can put a gift card inside as well. The card measures 5.25″ wide by 7″ tall. You can resize the card according to your needs.

 

Baby Crib Popup

Baby Crib Popup Card

Supplies Needed for the Baby Crib Popup Card 

Please note: Some supplies may include my affiliate links. I am an affiliate only for products that I use. Your purchase from my links will not cost you any more, but they will help support my blog. Thanks!

Free SVG file for Baby Crib Popup Card

Recollections 110# cardstock for popup card backing

81# text weight Stardream Quartz metallic paper for small Magnolia Flower

81lb Text  Green  Metallics paper for card mats and Pink Metallics paper for the front sentiment and the crib skirting.

80# white cardstock for Crib

12″ 1/8″ wide white satin ribbon

80lb Text Botanic Green Curious Metallics paper for Small Magnolia Flower leaves.

Small dogwood Flowers – Free SVG cutting files from CutterCrafter.com

Dries Clear Art Glitter Glue: Heartfelt Creations

Pearl Stickers

 

Assembly Instructions for the Baby Crib Popup Card

Cutting Instructions for the Baby Crib Popup Card:

Cut out all pieces in your choice of colors. If you wish to resize the card, select all, and resize proportionally so that all pieces fit together well. When importing the SVG file into your cutting software, check the sizing, and resize as necessary. The outside card measures 10.625″ wide by 6.875″ tall. The crib pieces together measure 10.5999″ wide by 3.791″ tall. The sentiment pieces measure 4.973″ wide by 3.182″ tall. The crib skirting piece measures 10″ wide by 1.579″ tall.

The red lines are score lines, set to cut with tiny dashes. If you are importing the design into Cricut Design Space, ungroup all first. If you prefer to use a scoring tool rather cutting dashes, you can import the score line from Shapes, and place those over the dashes. You can then delete the dashes, or hide them on the Layers toolbar. Next,  select each piece with its score lines, right click, and select Attach.

In case you need to change the sentiment, or add more cutting text, the font used was  GE Curviture. 

Folding Instructions for the Baby Crib Popup Card

Make valley folds for the score lines on the outer and inner cards. Make mountain folds on the white crib pieces and the skirting piece. Crease the scored lines using a bone folder or other folding tool.

Shaping and Assembling the Magnolia Flower

See the instructions for shaping and assembling the small Magnolia flower included in the Tips for Cutting Basswood on the Cricut Maker blog post. Scroll down to the paragraph on Decorate Your Cut Basswood Tree. The cutting design for the flower is available in the Free Resource Library.

Glue Crib Pieces

There is a tab on one end of each of the crib piece. Glue the end without the tab over the tabbed end of the other piece. When dry, glue the plain end of the crib over the tabbed end. This will form a 3D box. Press the box flat from side to side to make sure it folds and unfolds easily. The skirting, the piece with the scalloped edge, is next. Glue the plain end over the tabbed end. Place the skirting inside of the crib piece so that the scalloped edge show below the crib rails. The straight edge of the skirting is visible through the crib rails. Glue the skirting at each of the corners formed by the legs. Also, put a dab of glue in a few other places along the bottom crib rail to hold the skirt in position.

Putting the Baby Crib Popup Card Together

Glue the inside mat piece to the inside of the card. Be sure to line up the score lines. Make sure that the card opens and closes easily. Glue the sentiment for the front of the card on to its mat. Glue the mat to the front of the card. Put glue on the back side of the crib. Line up the feet of the crib just inside the bottom of the card. Glue the back side of the crib, with the back left corner snugly in the center fold of the card. Add glue to the left end of the crib piece. Next, close the card, and hold firmly in place. When dry, check to make sure the card opens and closes properly.

Decorate the front of the Card

Add pearl stickers to the ribbon strips. Now glue the ribbon to the top and bottom of the front of the card. Fold three of the butterflies that were cut out of the inner mat piece, and glue just their centers over the butterfly shapes connecting the sentiment on the card front. Next, add a row of 4 pearl stickers to the center of each butterfly. Now, assemble a small magnolia flower, and glue it over the ribbon on the bottom front of the card.

Add Pearl Stickers to the butterflies  on the Inside of the Baby Crib Popup  card.

Place the pearl stickers across the centers of each of the cut out butterfly shapes on the inside card mat. If desired, use more butterflies with folded wings and pearl centers on the front side of the crib. Add any additional greeting on the inside. Now your card is ready to bless its recipient.

Baby Crib Popup

Baby Crib Popup Card

Get the FREE CUT FILES FOR the Baby Crib Popup Card and the Small Magnolia Flower 

You can get the SVG cut files for the Baby Crib Popup Card and the Small Magnolia Flower as well as  some of my other FREE SVG projects from my FREE Resource Library.

 

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

Love,

Julie, cuttercrafter.com

Tags: 3D, 3D Flower, Baby, Cameo, Cards, Craft, Cricut, cuttercrafter, DIY, Electronic cutter, Explore, Gazelle, Gift, KNK, Make The Cut, Maker, Pazzles, ScanNCut, Silhouette, Silver Bullet, Sure Cuts A lot, SVG

LEAVE A REPLY

This site uses Akismet to reduce spam. Learn how your comment data is processed.

loading
×

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below. If you already have your password, enter the resource library here. Forgot your password? I put the password at the bottom of nearly all of my emails. But if you can’t find one of my emails to you, you can either fill out the form above again or email me at hello@cuttercrafter.com Password Tip: I recommend you copy and paste the password in to avoid any accidental mistakes. If you ever forget your password, please email hello@cuttercrafter.com Not working? If you enter the password and the same page refreshes, without any contents, that means you put in the wrong password. Double-check your email, copy the password, and paste it in to the link above. Still not working? I promise the password works—I haven’t changed it since I opened the library.   Try the copy/paste method again and make sure the URL you are going to has https at the start of it (that’s a secure page and it makes a difference). If that still isn’t working, try a different web browser.
%d bloggers like this: