Aug 25., 2018 / 3D Flowers, 3D Project, Boxes and Bags, Cricut, Cutter Review, Cutting Machines, Gift Box, Pazzles, Popup Cards, Scan N Cut, Silhouette Cameo3, Uncategorized
Best Paper for Cutting
What is the Best Paper for cutting with your electronic cutter? The answer to this question depends on what you want to do with the cut paper. Are you wanting to cut very intricate designs? Are you wanting to make popup cards? Do you want to print on the paper before or after cutting? Are you cutting very thin paper or very thick paper? Do you need to emboss your paper? There are many factors to consider in your paper choices.

Best Paper for Cutting
There is some excellent general information about paper called The Ultimate Guide to Card Stock posted here. And there is excellent information about paper weights here.
No matter which paper you choose to cut, you must do test cuts. Test cuts help you determine the optimal settings on your machine. See this document for test cut suggestions.
Note: Some affiliate links may be used in this post. I am affiliated only with products that I use. When you purchase products using my affiliate links, it does not cost you any more, but I will share some commission. Thanks!
Machine Choice
Not every machine can cut every different type of paper well. For example the Cricut Maker can cut Tissue Paper, Construction Paper and Crepe Paper very well using its rotary cutting wheel.

Rotary Blade Kit for Cricut Maker
But other electronic machines may require special stiffening to be cut these thin papers. And most machines will not cut these very thin and very fragile papers at all.
Silhouette machines, such as the Silhouette Cameo can cut lightweight cardstock and text weight papers very well. But these machines are not rated to cut heavier cardstock or heavier media.
Is the Best Paper Made of Hardwood or Softwood?
Every paper mill has its own formula for creating paper. All use hardwood and softwood to make their papers. But the proportions of hard to soft woods used in the papermaking process varies. When you find paper that works extremely well for the projects you like to make, take note of the mill that produces that paper. You might want to consider purchasing your favorite papers in quantities. When you get some papers that do not cut well for the projects you like to make, avoid purchasing papers from the mills that produce them.
For example, I purchase inexpensive paper made by Georgia Pacific for test cutting new designs if they are not too intricate. But when making final project cuts and intricate designs, I prefer to use papers by Neenah or Colormates from Worldwin. These papers seem to be crispier, and cut without shredding. Even very intricate designs cut very cleanly on these papers. Crispy papers have a higher hardwood content that make them cut better on electronic cutting machines.
However, stiff and crispy papers may crack under pressure when using Die Cutter/Embossing machines. In this case, it is important to test small samples for embossing, before you purchase in bulk. You may find that paper that cuts best on the electronic cutter, is not the best paper for using in a pressure embossing machine.
The Best Paper for Light Weight Projects
Tissue Paper
When you want to emboss many, many layers of tissue paper, embossing folders used with Die Cutter/Embossing machines work great. However, tissue paper may rip and tear under a cutting blade in a cutting machine. For this reason, a rotary blade, such as that available for use on the Cricut Maker works best. You can cut some amazing flower petals from tissue paper using the Cricut Maker and rotary blade.

Cricut Maker
Use a light tack mat, or the project may tear when you remove it from the mat. Do not attempt to cut any shape smaller than 3/4″ using the rotary blade. Cut larger simple shapes from tissue paper for best results.
If you are needing straight cuts, a hand-held rotary tool may work for cutting multiple layers at a time. Then you can use scissors to make any necessary curved cuts.
Crepe Paper
Crepe paper comes in a wide variety a weights and attributes. When making crepe paper flowers, getting a quality crepe paper that stretches nicely is important. Crepe paper comes in many weights. You may be able to cut heavy crepe paper, ironed between two layers of freezer paper with a regular blade on your electronic cutter. But I have found that if I want to cut crepe paper on a cutter, Cricut Maker using the Rotary blade is the only machine that will do it well without tearing. Again, do not plan to cut any shapes smaller than 3/4″.
Crepe paper rolls for decorating may not be your best choice for cutting. This type of crepe paper is very thin, and stretches very little.
Construction Paper
Construction paper is very inexpensive. But it is also tears very easily. Its fibers are very loose. Cutting blades rip and tear in the cutting process unless using a rotary cutting blade. Use the rotary blade on the Cricut Maker for simple cuts on construction paper. Otherwise, scissors may cut the best. Construction paper is not always the Best Paper option for use with cutters.
Vellum
Translucent vellum used for crafting is generally a thin, but crispy paper that cuts well with a blade on electronic cutters. It comes in a text weight or as cardstock. The text weight paper is very fragile, so should be handled carefully. Translucent vellum cardstock works extremely well with line embossing on electronic cutters. And it cuts very well, too, without using a special backing or freezer paper.
You can create some lovely parchment type crafts using vellum, an embossing tool, piercing tool and cutting blade on your electronic cutter. If your machine does not have piercing and embossing tools available, it is possible to use hand embossing or piercing tools in a pen holder. The tip of a blade can produce a pierced effect if you don’t have a piercing tool.

Pierced, embossed, and cut Vellum popup butterfly
Scrapbook Paper
Decorative scrapbook papers are fun to use on cards and scrapbook layouts. Most cutters can cut scrapbook paper without a problem. But some scrapbook papers cut better than others. Some scrapbook papers made of layers may split, bunch or tear when cut. If you have papers that give you problems, avoid tiny cuts. Use them for cutting larger shapes. Cutting small welded text with sharp angles can result in lots of tearing. It is better to use nice crispy paper without a white core for intricate cuts and tiny text. If you find a brand that cuts well, stick with that brand for cutting with your machine.
Text Weight Paper
Paper that feeds into printers is usually text weight. 20# text is very light weight printer paper. 24# paper is better than 20# for double sided printing. 37# text weight paper is very nice for print and cut projects that do not need to be stiff. You can use shimmer papers for making lovely 3D flowers. This paper is described as 18 GSM (32/80lb Text) , The key word is “text” – this is NOT cardstock. It feels like quality letterhead paper. It has a smooth, Satiny Metallic finish.
Text Weight Papers can also be sold in heavier weights. Even up to weights that are nearly equivalent to medium weight cardstock. Be sure to read the weight specifications. Is it Text Weight or cover stock? Even more importantly, try some test cuts. Does it cut well for your purposes? If you need to print on it, will it feed through your printer smoothly? It is recommended for use in printers? Heavy cardstock may not work well for cutting around printed images.
Be sure to use a light tack mat when cutting light weight papers. Light weight papers may not come off of a brand new, very sticky mat. At least you should condition a new mat, and do test cuts on heavier paper on a new mat before using it with lightweight paper.
Best Paper for Cardstock Projects
Cardstock is available in weights from medium weight 65# up to very heavy weight 110#. 70#, 80#, 90#, 100# and 105# are also common cardstock weights. You may want to have a variety of weights on hand for different projects.
Medium Weight Cardstock
65# cardstock is the most common medium weight cardstock. It can be used for cards, scrapbook photo mats, stamping embellishments, home decor, gifts and other crafting projects. Some medium weight cardstock cuts well, and others do not cut well on electronic cutters. If you have some medium weight cardstock that does not cut well on your electronic cutter, try using it for embossing on cards and embellishments. It may also be used for making simple shapes or photo mats.
It is easy to assume that your cutter is broken when nothing will cut right. However, “mushy” paper is the culprit for bad cuts more often than not for me. Also, be sure to check the cutter maintenance tips to rule out other causes of poor cuts.

Cuts before and after cutter maintenance
Heavy Cardstock
Any cardstock above 80# is considered to be heavy weight. 100# cardstock is great for coloring, molding, and shaping for 3D flowers. You will love 110# cardstock for creating heavy duty boxes and 3D paper projects. 100# cardstock is great for making popup cards. You will like using 80#-90# cardstock for making cards, intricate frames, borders, corners, etc . If you prefer cutting heavy cardstock, stay away from the cutters that are limited to cutting medium weight cardstock.
Some heavy cardstocks have polyester fibers in them, which make them strong. But these polyester fibers make them much more difficult to cut cleanly, especially on intricate designs. The polyester fibers also are very hard on blades, dulling them quickly. These textured papers make very nice cards and photo mats. However, they may not be the Best Paper for cutting with your electronic cutter.
Watercolor Paper
Watercolor paper can have different weights and densities. These papers are great for watercolor projects. Cutting watercolor paper into simple shapes may not be problematic. But it might be best to cut only simple, basic shapes from it. Because watercolor paper is not crispy, it may tend to bunch and shred by the blade. You may be able to cut shapes around your watercolor designs if you are careful.
Matboard
Professional quality photo mats are made from 4-ply matboard . Matboard is very stiff, and very difficult for most electronic craft cutters to handle. Some of the cutters that can cut with up to 1000 grams or more of pressure can cut 2-ply matboard up to 2mm thick. The cutting blade must also be able to handle the thickness of the Matboard. Some cutters, such as Scan N Cut, have the pressure rating for cutting heavier materials. But they are limited in the thickness that they can handle. Scan N Cut 2 is rated to cut media no thicker than 1.5mm. Read more about cutting matboard with the Knife Blade on the Cricut Maker here. Pazzles Vue can cut 2 ply matboard up to 2mm thick.
Scan N Cut 2 cuts media only up to 1.5mm thick. The Scan N Cut DX to be released in the Fall of 2018 is boasting a 3mm thickness cutting option. Cricut Maker cuts media up to 2.5mm thick, but would require the optional Knife blade to access the pressure needed for cutting thicker media. Pazzles Vue cuts media up to 2mm thick. Some of the KNK machines will cut Matboard, as does the Silver Bullet line of cutters. Be sure to check your cutter specifications before investing in Matboard to cut.
Chipboard
Chipboard comes in many thicknesses and densities. Some chipboard is made of multiple layers. Some is coated on a single side, while others have a coating on both sides. Most cutters can handle cutting cereal boxes, which is flexible chipboard. Some chipboard is not flexible. That type is most difficult to cut. Some chipboard shreds during multiple cutting passes. There is chipboard available that cuts well without shredding. Here is an excellent article about chipboard. Cricut sells 11″x11″ chipboard made specifically for use with the Cricut Maker. Silhouette sells a chipboard colored cardstock, as regular chipboard cannot be cut on Silhouette machines.
I prefer cutting chipboard that will cut in a single pass. This is because the density of chipboard can cause a cutter to skip steps. If this happens, successive passes would not be in exactly the same location as previous passes. This results in shredding of the chipboard and very poor cuts. If multiple passes are necessary, it is best to start with lower blade extension and cutting pressure, then increase these settings for the next passes. This reduces the possibility of missed cutting steps. If you need thicker chipboard pieces, you might want to try cutting several pieces of .022″ chipboard, and gluing them together to make your project. Do not plan to cut intricate designs from chipboard.
Cricut Maker users may cut chipboard up to 2mm thick with the optional knife blade. The interesting thing about using the chipboard setting in Cricut Design Space, is that chipboard and other thicker, denser materials do not use a cutting pressure any more than 750 grams. The secret to success for this machine is the slow cutting, and many, many passes. The blade needs to have sufficient cutting surface to cut completely through the thickness of the chipboard.
Best Paper Brands for Cutting
I have been using electronic cutting machines since 2004. The brand of paper that I have had consistently excellent cutting results with is Worldwin Papers, I have used most of their papers varying from very light weight to very heavy weight, and all of them cut with excellence on my cutters. Their textured 65# Cutmates line is guaranteed to cut well on any electronic cutter. The selection of colors in the smooth 65# Colormates makes it to be much in demand among cutter users. My personal favorite smooth paper by Worldwin is the 90# Colormates Smooth and Silky. Their colormates line of heavy textured cardstock is also wonderful to cut. I love their metallics as well.
If you cannot find the Worldwin papers you need at Amazon, you can purchase your favorites from The Paper Mill Store.
When I need low cost paper options that I can get quickly locally from Michaels, I purchase Recollections cardstock . Their 65# cardstock generally cuts well, as does their very heavy 110# cardstock.
Paper Brands to Avoid
I avoid papers from Joann. Their Core dinations brand does not always cut well. I save this paper for purposes other than cutting on my electronic cutters. Paper sold at Walmart is inconsistent for cutting purposes. One color in a package may cut OK, while then next color will not cut well at all. These may work for simple shapes, but I stay away from their papers when cutting intricate projects.
Best Paper Hints and Tips
Humidity
Nice paper for cutting may not cut nicely if it has been exposed to humidity. Pressure and blade settings may change with the environment. What cut well this morning may not cut so well at the same settings in the afternoon when the air conditioning is running. Always do test cuts when environmental changes occur.
Storage
Store your paper in Zip lock bags after you have opened its original packaging. Two-gallon zipper bags fit 12″x 12″ papers well for storage. Storing them this way will prevent the papers from collecting excess moisture that can hinder cutting quality. Moist papers get “Mushy” and may tear and bunch during cutting.
Emboss the Cut
If you have some paper that is not cutting well, try using an embossing tool or scoring tool in the machine over all of the cut lines a couple of times at very high pressure. Then cut as you normally would. The embossing tool compresses the paper along the cutting lines so that you can get much better cuts.
Drying with Heat
Some have mentioned drying paper that has soaked up moisture in the oven. If you attempt this trick, be sure to keep an eye on the paper, so that it does start burning. Using a low temperature in a dehydrator for a longer period of time might be safer. Check on the paper at regular intervals. Some prefer to dry out paper using an iron.
Chipboard
After removing chipboard from its packaging, it gets thicker overnight. New chipboard straight from the packaging requires different settings than would be required if the paper sits out overnight. Cricut recommends letting its chipboard sit out of the package for a day before cutting for best results. Chipboard is very absorbent, and sensitive to environmental conditions.
Be sure to use a high tack mat and possibly tape the edges of chipboard and other heavy media to the mat to keep it from moving around during cutting .
Best Paper Cutting Settings
Because paper is very environmentally sensitive, the same paper may require very different settings. Those who live in very dry climates will need to use less cutting pressure than those who live in humid environments. For this reason, performing your own test cuts is extremely important. Don’t rely on a published list of settings or presets. Sometimes different colors of paper in the same package can require different settings. What cut well yesterday at certain settings may require different settings today. Be sure to do test cuts at the beginning of each cutting session, and any time you make color changes or environment changes.
Best Paper Conclusion
If you are faithful to do test cuts, you will be more successful cutting any papers you have in your collection. Be sure to keep lots of inexpensive paper that cuts well, on hand for doing project test cuts. Save your expensive paper for the final versions. This will save you lots of frustration.
The paper that is best for you depends on what you like to cut most, and what machine you have. Special tools available for use with your cutter can also make a difference in how they cut.
Here is FREE cutting project that you can use to check how well your paper cuts with each of the tree layers. The hearts layer provides some intricate cutting, while the white layer provides a simple shape to cut. The Brown layer has some intricate inner detail. You can use this project on a card or scrapbook layout.

Love Football Border
>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<
This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.
If you already have your password, enter the resource library here.
Love,
Julie, cuttercrafter.com
Carey Holman / June 30, 2020., 12:07 am
I just read this article, and it was exactly what I needed! I was cutting fine all week, then this afternoon just needed a few more pieces in some different colors -- and nothing worked! Shredding, tearing, not cutting all the way through. Your article explained everything so nicely! The idea of running the embossing tool over the cut lines first is genius. Thanks for taking the time to explain all this!