decoration decoration decoration
decoration
leaf leaf leaf leaf leaf
decoration decoration

How to Emboss Vellum with the Cricut

Many have asked how to emboss vellum with the Cricut.  You can also create flowers that pop out from the embossed background.  Then you can add some lovely petals for a 3D effect to make a gorgeous  card. In this tutorial I will share how to make this lovely card using your electronic cutter.

 

Embossed Popout Daisy Card

Embossed Popout Daisy Card

Using Electronic Cutters to Emboss Vellum

You don’t have to have a Cricut in order to make this card.  The SVG, PVGC, and FCM  cutting files for this project are available that can be used in most electronic cutting machines. You can find them in the FREE Resource Library. Download the free cutting files.  You can right click on the file link, and select “Save Link As” or “Save Target As”. Save it to your computer. When the download is complete, double click on the downloaded file and select Extract All. Then open your preferred cutting software, and import the cutting file. There is one file that contains all the design pieces. If you are using a Scan N Cut machine, use the FCM file.   Those using Pazzles InVue software will use the PVGC file. All others should use the SVG file.

Note: this post may contain affiliate links.

Supplies Needed to Emboss the Vellum Popout Card

Heavy Translucent Vellum Cardstock
Electronic Cutter – Pazzles Vue, Scan N Cut, Cricut Explore or Maker Silhouette Cameo, or other cutter that uses SVG files.

If you wish to add foiling to your design, you will need foiling tools. I used the We R Memory Makers Foil Quill and silver foil but you may use a metallic pen instead if you don’t have the foil quill. I used the bold tip for this project.
Embossing Mat- Pazzles,or Scan N Cut Embossing Kit, or  SNC Embossing Mat 
Embossing Stylus –Pazzles Embossing Tool
or
Hand Embossing Stylus or Scan N Cut Embossing tool
Dries Clear Adhesive
Low Tack tape
Pearl Stickers
Embossed Vellum Popout Card cutting files from the 
Free Resource Library 
Pop Dots

Limitations to Emboss Vellum With Cricut

Embossing vellum with the Cricut Maker is not as straight forward as it is with other electronic cutters. This is due primarily to the fact that Cricut does not allow any options for adjusting the pressure of tools using  the A slot on the Cricut Maker or Cricut Explore cutting head.  Cricut Explore does allow use of a special pen holder in the blade holder slot. With that  holder in the B slot, the pressure can be adjusted up to the maximum under Custom Settings to 340-350.

Pen Holder for Cricut Explore

Pen Holder for Cricut Explore

While the Cricut Maker boasts of up to 4000 grams of cutting pressure, this pressure is only available in the B slot on the cutting head. And a hand-held embossing stylus is not recognized in the B slot. Maximum pressure is needed to get an excellent embossed effect on vellum cardstock.

The only pressure options on the Cricut Maker head A are the automatic settings for either drawing or scoring.  Pressure for drawing on the Cricut Maker is inadequate for embossing. The pressure for scoring is adequate, given the right embossing stylus and mat. The Cricut Scoring tool tip is not broad enough for embossing. It has a tendency to tear through delicate vellum cardstock.

Paper to Use to Emboss

Selecting to best paper to use for embossing with your cutter is very important.  Lighter weight papers will emboss more readily on cutters, than cardstock. It can take massive amounts of down pressure to form nicely embossed shapes on cardstock.

What is Translucent Vellum Cardstock?

Vellum is a type of coating that is used on some papers. The type and weight of vellum is very important for this project. While our cutters cannot make a very good embossed impression on most cardstock, one exception is to use translucent vellum cardstock to emboss with your cutter. The cardstock should be translucent enough to be able to see through it.  When using translucent vellum cardstock, an embossing tool will create white lines on the Vellum.

Best Weight of Transparent Vellum Cardstock to Use

For the Embossed Popout Daisy Card, you need to use Transparent Vellum Cardstock that is neither too heavy nor too light. The popouts will work better with Vellum that is still. But if the cardstock is too thick, the embossed design will not be the pretty white color you are wanting. If the cardstock is too thin, the design may tear during cutting or removing from the cutting mat. I found that 36# translucent vellum cardstock works best for this project.

Embossing on Legacy Cricut machines

Those using any of the legacy Cricut machines  (Original Cricut Personal, original Cricut Expression, Cricut Cake, Create, Cricut Cake Mini) will find that the Pazzles Embossing tool fits perfectly in the blade holder of these older machines. You can emboss on these machines if you have an embossing mat and embossing tool.  Unfortunately, the Pazzles Embossing tool is too large to fit in the Cricut Explore or Cricut Maker.

Pazzles Embossing Tool

Pazzles Embossing Tool

 

Cricut has simplified the cutting process by providing automatic settings wherever possible. But this is an example of how automatic settings can limit creativity.  Perhaps one day Cricut will add full embossing functionality. Until then, you can use the techniques I have used to make this card.

Embossing Stylus

To emboss, you need to be able to use an embossing stylus. The stylus needs to fit the pen tool holder. In addition, the stylus tip needs to be long enough to extend deep enough through the pen holder to reach the mat.

Testing Hand-Held Embossing Tools

I have tested a number of different hand-held stylus tools. Unfortunately, most of the ones I have collected through the years will not work in the Cricut machines.  The length of the tips of most were too short.

I did find one that works in the Cricut Explore or Cricut Maker. This one has a metal tip that is a full 1″ long.

Hand

Hand Embossing Tool

I still have to wrap 5 inches of blue painter’s tape around the center of the handle to make it a bit thicker to fit snugly in the pen holder.  Place the tool with the larger ball tip down into the A tool holder of the Cricut Explore or Cricut Maker. Other cutters than have pen holders may also use a tool like this for embossing.

Hand Embossing Tool With Tape

The tip of the embossing stylus needs to  be quite close to the mat surface, as shown in my photo below.

"">

 

Embossing Stylus In Cricut Maker

Embossing Stylus In Cricut Maker

Embossing Mat

In order for an electronic cutter to effectively create embossing designs on vellum, it is essential to have a cushion under the paper on the mat. Too much of a cushion may result in tears in the delicate vellum. And not enough cushion may result in unsatisfactory embossing.

Some cutter companies provide embossing mats that work with their brand of cutters. Other companies do not. Thin craft foam that is .8mm to 1mm thick may serve as an embossing mat in some cutters. Others have found that using faux leather provides an adequate surface for embossing.

With the foam or faux leather options, you will need to apply some adhesive to the top in order for the vellum to adhere to it during embossing and cutting. Too much adhesive may cause the popout petals on the card to tear when removing it from the mat. Too little adhesive may allow the vellum to shift during embossing and cutting. Taping edges of the vellum down without adhesive on the mat does not work due to the intricate detail of this project.

Embossing Mat Testing Results

Pazzles Embossing mat works well with the Pazzles machine. It is a bit too wide to fit Cricut machines. However, the Pazzles embossing mat may be trimmed down to work with Cricut machines.

Bosskut Gazelle made an excellent embossing mat that works with a number of different cutters.  It will work with Cricut machines as well, but Bosskut is no longer in business.

I found the Scan N Cut Embossing mat to be a workable solution for How to emboss vellum with Cricut machines. A sticky Cricut mat holds the embossing mat in place. And the top surface of the embossing mat is sticky, and able to hold the vellum in place while the cutter is embossing and cutting.

Scan N Cut embossing mat on a Cricut mat.

Scan N Cut embossing mat on a Cricut mat.

When combined with a hand embossing tool, the Scan N Cut mat worked well to emboss vellum with the Cricut machines.

Silhouette users who would like to emboss vellum will need to use the Silhouette Curio cutter. This is because the Cameo and other Silhouette machines do not have adequate pressure for embossing. They also do not have enough clearance between the mat and roller bars to fit an embossing surface between the mat and vellum.

Foiling in Lieu of Embossing

In the event that you do not have an embossing tool and embossing mat that work to Embossing Vellum with your Cricut machine, you may elect to use the Embossed Popout Daisy Card design with a foil quill and foil. The background design of this card foils nicely. This is an option for those using Silhouette cutters as well.

Foiled Cricut Popout with Daisy Card

Foiled Cricut Popout with Daisy Card

How to Emboss and Cut the Embossed Popout Daisy Card

If you are using a Pazzles or Scan N Cut machine to emboss and cut the popout daisy card, you will find that all lines in the cutting files are designated as either draw or cut. Choose the Draw lines first and emboss the Draw lines using your embossing tool and mat.  Use maximum pressure when embossing.  Do test cuts to determine the best settings for cutting.

Do not remove the mat or move the cutting head after the “drawing” is complete. Simply replace the embossing tool with the cutting tool, and select “Cut” to use with the cutting lines. Cutting on the embossing mat will not ruin it it you have set the blade depth appropriately.

 

How to cut and emboss with the Cricut

The process is a bit different when using Cricut Explore or Cricut Maker.  First, import the SVG file into Cricut Design Space. To do that, open Cricut Design Space. Click on Upload, the bottom icon on the left toolbar. Next, click on Upload Image. Browse to the place where you saved the Embossed Vellum Popout Card file on your computer. Click on Save. The design you just uploaded will be visible now. Click on it to select it,  and click on Insert Image.

Get the Design Ready in Design Space

Ungroup the design pieces by right clicking on the design, and selecting Ungroup. Next, click on the white emboss portion of the the design, and designate it as “Score” at the top of the page. Select both the score and white cut layers, right click and select Attach. Click on the top score layer and the next group layer on the right toolbar. Right click, and select Attach.

Now click on Make It.  Move the entire design in and down 1″ from top and left sides of the virtual mat. This will reduce tearing along the edges of the vellum.  Select Continue, and select your machine.  Set materials to Vellum. Next, Set tools. Select the Scoring Stylus for the embossing.

Place your vellum on the embossing mat, and load the hand embossing tool in the A tool holder. Load the mat into the Cricut, and press the Go button on the machine when it starts blinking.  It will take about 30 minutes to do all of the embossing and cutting on the vellum. Get the paper for the mat and card base ready. Be very careful when lifting  the cut design from the mat to prevent the petals from tearing.  Finally, you can cut the remaining card pieces.

How to Assemble the Embossed Vellum Popout Card

Embossed Popout Daisy Card

Embossed Popout Daisy Card

The side that is facing up on the mat is the Debossed side, as the embossing tool has pressed the design down into the vellum. The opposite side is the embossed design. You may use the side that you prefer on your card.

Fold the base card in half. Next, glue the mat to the center of the card front, or use pop dots to raise the mat a bit off of the card base. Add small dots of Dries Clear Adhesive on the back side of the vellum, only on places that are white from the embossing. Let it dry. Gently lift the cut petals up, away from the card, to give dimension.

Add the 3D Daisies

Embossed Popout Daisy Card

Embossed Popout Daisy Card

If you wish to add 3D daisies to the card, place a daisy piece on a foam mat, and press down firmly in the middle of the daisy to lift the petals. Repeat with the next daisy piece of the same size. Place a dot of glue on the back of one of the daisy layers, and center it over the other daisy layer of the same size. Make sure the petals are opposite the first layer. Add a drop of glue on the center back of each 3D Daisy layer and adhere to the center of one of the popout daisies on the card, again, keeping the petals opposite the bottom layer.

Repeat with all three flowers.  Glue a pearl sticker to the center of each of the 3D Daisies on the card. You card is now complete! Add a sentiment of your choice to the inside of the card, and give it to someone special!

How To Emboss Vellum with the Cricut

How To Emboss Vellum with the Cricut

Be sure to go to the Resource Library to grab the free cutting file for the Embossed Vellum Popup Daisy Card cutting files. If you like this project, please comment, share, and pin!

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

Julie

;

Foiled Easter Sliceform

Make a  DIY Foiled Easter Sliceform centerpiece with the free cutting template. Use your electronic cutter and a Foil Quill (or metallic pen) to create this lovely design.

Foiled Easter Sliceform

You will find the SVG, PVGC, FCM and PDF cutting files for this project in the FREE Resource Library. Download the free cutting files.  You can right click on the file link, and select Save Link As or Save Target As. Save it to your computer. When the download is complete, double click on the downloaded file and select Extract All. Then open your preferred cutting software, and import the cutting file. There is one file that contains all the design pieces. If you are using a Scan N Cut machine, use the FCM file.  If you are cutting by hand, use the PDF file.  Those using Pazzles InVue software will use the PVGC file. All others should use the SVG file.

Note: this post may contain affiliate links.

Supplies Needed to Make the Foiled Easter Sliceform

 Yellow 110#  cardstock
Electronic Cutter – Pazzles Vue, Scan N Cut, Cricut Explore or Maker Silhouette Cameo, or other cutter that uses SVG files. If you wish to add foiling to your design, you will need foiling tools. I used the We R Memory Makers Foil Quill and copper foil but you may use a metallic pen instead if you don’t have the foil quill. I used the bold tip for this project.

Low Tack tape

Foiled Easter Sliceform Cutting Files from the Free Resource Library 

.

Import the Design into Your Cutter Software

This design contain two cutting pieces and a grouped set of lines for foiling or drawing.  You will use the draw function of your software to foil or draw the lines on your cardstock. Then you will cut out the two pieces for the sliceform. The green lines are for foiling or drawing, and the yellow lines are for cutting.

Foiled Easter Sliceform

Screen shot of drawing and cutting lines.

When you click on the green lines, if all pieces are selected, right click and select Ungroup. Then you should be able to select the green lines and assign them to Draw in your software.  Make sure that your foil quill is heating up while you prepare your paper on your cutting mat. It needs to preheat for at least 5 minutes.

Select the Proper Type of Foil for use with the Foil Quill to make this Foiled Easter Sliceform

If you are not using the foil that came with the Foil Quill set, make sure you are using the correct type of foil.  Not all foil will work with the Foil Quill.  Specifically, avoid foils designed to be used with toner sheets  and laminators. Check this list when in doubt about the foils you have. I have successfully used foil from WRMK, and CraftersCompanion.

Set Up the Foil Quill (or pen) in Your Machine

Select the appropriate adapter for you cutting machine, and screw it onto the Foil Quill. Adapter A is for Silhouette machines such as the Cameo. It also works on the Pazzles Inspiration or Pazzles Vue. Use Adapter B with Scan N Cut machines. The adapter for Cricut machines or Pazzles machines is C.  Adapter D works with Sizzix Eclips machines.  If you are using a Cricut Explore or Maker with two tool slots, you will need to remove the pen holder from the tool slot on the left. To do that, hold the head firmly with one hand, and push up gently from the bottom of the pen holder to pop it out.  Next, place the Foil Quill into the slot.

Foil Quill installed in Cricut Maker

Foil Quill installed in the Cricut Maker.

Plug the Foil Quill into a Power Source

Plug in the cord of the Foil Quill into a USB power source.  You may use a USB power adapter for a phone in a standard power outlet. Or you can plug the cord into a USB port on your computer. I purchased a USB extension cord from Dollar Tree, because the cord was too short to reach to my computer USB Port.  If you are using the Cricut Maker, you can plug the cord into the USB port on the right side of the machine.  Do not plug your Foil Quill cord to the USB port on a Scan N Cut machine. USB data ports on cutters will not provide the necessary power for the Foil Quill.  Use a standard power supply or computer USB port.

Cricut Maker USB Power Port

Cricut Maker USB Power Port

Preheat the Foil Quill

The Foil Quill needs to be plugged into a power source for at least 5 minutes prior to use.  A light at the top of the quill turns on when the Foil Quill is properly plugged in. Make sure that the cord will not be in the way of the moving mat or cutting head on the cutter.  Also, ensure that the tip of the heating foil quill is not touching your mat, or paper, or other flammables while heating.

 

Paper Selection

Heavier paper works better with this file as the completed project needs to stand on its own. Use cardstock that is at least 80#, and preferably 100# or 110# . The paper should be the same on both sides.  Since this design is very intricate, be sure to do test cuts to determine the best blade depth and pressure. Cut with a slow speed.  See this article for more tips on doing test cuts. 

Prepare to Foil and Cut

While the foil quill is preheating you can prepare your paper and foil. Place the cardstock on the cutting mat.  Cut a piece of adhesive foil that is at least one inch larger than the lines to be drawn.  Since  the line portion of my design is 4″ x 4″,  I cut my foil at 5″ square.  Cut strips of low-tack tape such as blue painter’s tape into narrow pieces. You can use  a craft knife and ruler on a mat to cut strips of tape that are about 1/4″ wide and 5″ long.  Place the foil on  the paper at least 1″ down from the top of the mat, and 1″ in from the edge of the mat.

Position of design on mat in the software

Position of the design on the virtual mat

Place a tape strip on one edge of the foil to hold it in place. Then smooth out the foil, and place another narrow strip of tape on the opposite side. Repeat with the other two sides of the foil.

Foil taped to paper with low tack tape

Foil taped to paper on the mat.

 

Foiling or Drawing and Cutting your Project

Import the Easter sliceform design into your cutter software.  Position the design lines in the software in a position corresponding to where you placed the  paper and foil on the cutting mat. Select the green lines . Make sure that these lines are set to Draw.  Send the design to Draw and Cut.  If using Cricut Design Space, click on Make it. Set the media to lightweight chipboard if using 110# cardstock, and select More. If using 80# or 100# cardstock, select heavy cardstock in your media settings, and More.  If your machine has speed options, set it to Slow. Use the blade settings that worked best during your test cuts.

The machine should draw first.  Watch the machine as it works drawing the design lines with the foil quill. When the drawing is complete, pause the machine either in the software or using the Pause button on the machine. Remove the foil and tape without moving the mat or the cutting head.  Then resume cutting by pressing the pause button again.

Remove the Foiled and Cut Design from the Mat

When foiling and cutting are complete, unload the mat. Remove the cut shapes very carefully from the mat. The intricate design might tear if you are not very careful.  Some of the tiny lattice detail may stick to the mat. Use a poker tool to remove any remaining pieces away from the Foiled Easter Sliceform.

Foiled and Cut Easter Sliceform

Detailed cut shape

Assemble the Foiled Easter Sliceform

The yellow design pieces both have notches at the top and bottom. She smaller piece slides inside of the larger piece.  The notch at the top outside of this smaller piece slides into the opening above the cross on the other piece, and into the notch there.   The bottom right edge of the smaller piece slides through the long slot below the bottom of the cross, Slightly curve the open edge of the smaller piece to pass it through the top opening of the S.

Foiled Easter Sliceform assembly

Putting the two sliceform pieces together.

Slide the bottom opening of the smaller piece down to the bottom of the opening of the larger piece.   Unfold the two pieces so that they form a 90 degree angle.  The bottoms of both pieces should line up perfectly so that it will stand on its own.

Sliceform Assembly final.

Sliding the bottoms of the two pieces together.

 

Foiled Easter Sliceform Completed!

Now it is your turn! Share the with your friends on Facebook. I would love to see what you make with the Foiled Easter Sliceform template.

Foiled Easter Sliceform

Foiled Easter Sliceform

 

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

Julie

 

How to Make a Foiled Slider Popup Card

Learn how to make a foiled slider popup card with the free SVG template from the Resource Library.  While making this project, learn how to use the Foil Quill tool by We R Memory Makers, and the Gemini Foilpress by CraftersCompanion.

Foiled Shamrock Slider Popup Card

Foiled Popup Slider Card Pin for Pinterest

You will find the SVG, PVGC  and FCM cutting files for this project in the FREE Resource Library. Download the free cutting files.  You can right click on the file link, and select Save Link As or Save Target As. Save it to your computer. When the download is complete, double click on the downloaded file and select Extract All. Then open your preferred cutting software, and import the cutting files. There is one file that contains all the design pieces. Because there are lots of design pieces with intricate detail, I have broken down the file into three smaller pieces. You can use the basic popup slider design to embellish in many different ways.

Note: this post may contain affiliate links.

Supplies Needed to Make the Irish Blessings Slider Popup Card

 White  80#  cardstock
One sheet printed  cardstock for base card
Coordinating pastel cardstock.
Glue that dries quickly.
Strong, double sided adhesive 
Electronic Cutter – Pazzles Vue, Scan N Cut, Cricut Explore or Maker, or other cutter that uses SVG files.

If you wish to add foiling to your design, you will need foiling tools. These are the ones I used for this project.
Gemini Jr.
Gemini Foilpress
Crafter’s Companion Gemini FoilPress Foil Roll for Papercraft- HollyFoil
We R Memory Makers Foil Quill

Cutting Files from the Free Resource Library 

Cut your Card Pieces

Irish Blessings Slider Popup Card Pieces

Card Pieces

Score the red lines. Foil the small dark green pieces and text using the Foil Quill. I cut the larger shamrock from heavy white cardstock and foiled it using my Gemini Foilpress. You can use plain green cardstock, or green mirror or glitter cardstock if you have some. I didn’t have the exact shade of paper I wanted, so I decided to use my Holly Green Foil.

The large pink piece is the base card. I think it looks best if you use some designer paper that is double sided.  I chose a sheet of paper from the Peony paper pad from Crafters Companion.  You may use the light green frames around the foiled designs if you like. I used one cut from the patterned paper and placed it around the foiled design on the tag.

The tag is the piece that forms the inside slider.  The smaller pink piece forms the hidden message inside of the card.

Fold Your Slider Card

Fold the base card in half on the center score line.  The cut window on the front of the card has several fold line. Make a valley fold at the top of the window. Make a mountain fold at the center of the window. Finally make a valley fold for the tab at the bottom of the window. Burnish the folds with a bone folder or similar tool to make nice, crisp fold lines.

Slider Popup Base Card Folds

Base Card Folds

Prepare the Designs for the Inside of the Foiled Slider Popup Card

You do not have to foil these designs. You can alternately use a metallic pen to draw the designs with your cutter. I created the very delicate small shamrock designs and the textured text so that I could play with my new Foil Quill.

Irish Blessings Slider Popup Card Inside Foiled pieces

Foil Quilled inside Pieces

Introducing the Foil Quill to Make a Foiled Slider Popup Card

Drawing with the Foil Quill using a cutter is not much more complicated than drawing with a pen in your cutter. Instead of placing a pen in the cradle,  select the adapter that is appropriate for your machine. Hold the quilling tool in one hand, and rotate the adapter around the threads at the top of the Foil Quill.

Foil Quill Tool Pieces

Foil Quill tool Pieces

The pink tool has an ultra fine tip, the blue one has a standard tip, and the black one has a bold tip. I used the blue Foil Quill for my project.  Select the adapter for the cutter you are using. Adapter A is for use with Silhouette machines such as the Cameo, Craft Robo, Wishblade, etc. T B Adapter is for use with Brother Scan N Cut machines. Adapter C is for use with all Cricut machines, as well as Pazzles machines. And Adapter D is for use with Sizzix Eclips, and any machines that can use the Sizzix Blade holder, such as KNK Zing, Zing Orbit, and other machines.

If a machine can use a pen, you should be able to use the Foil Quill either with one of these adapters or without an adapter. Hold the Foil Quill in one hand and turn the adapter around the threads near the top of the tool.

Select the Correct Type of Foil for use with the Foil Quill

Not all foils will work with the Foil Quill. Heat reactive foils for use with toner sheets and laminators and machines like the Minc will not work with the Foil Quill. In addition to the foils designed to work with the Foil Quill, the foils made for use with the Gemini Foilpress will work. There are several small rolls of foil included with the purchase of the Foil Quill Kit. There is only a small sample of foil in the kit, so if you plan to use your Foil Quill a lot, you may wish to order more. Here is the foil I used for my foiled slider popup card.

Foil for Foil Quill Slider Popup Card

Gemini FoilPress Foil

Power up the Foil Quill

The USB cable on the Foil Quill is designed to plug into a powered USB port. You can plug it in to a USB port on your computer. If you have a Cricut Maker, you can plug it into the USB port provided for charging your tablet. Do not plug it into a data port on your cutter, such as the ones on Scan N Cut machines. You can use a power supply made for charging your cell phone. The cable was not long enough for me, so I purchased a USB extension cord at Dollar Tree to help the cable reach to a USB port on my computer.

USB Extension Cord

USB Extension Cord

The Foil Quill needs to heat up for 5 minutes before you use it. So plug it in before you start assembling your Foiled Slider Popup Card. When the Foil Quill is plugged  in, the top of the quill lights up.

Prepare Your Mat, Paper, and Foil

Place your paper on your cutter mat.  Cut a piece of foil about 1″ larger than your design. Place the dull side of the foil down on the paper. Tape around the edges of the foil using the low tack tape included with the Foil Quill package. If you cut out your tag and backing piece for the inside of the card first, you don’t need to use the low tack tape. You can place the cut foil over the cut cardstock, and tack the excess foil to the adhesive on your mat. However, this may result in some foil residue on your cutting mat. If you do not want foil on your cutting mat, do the foiling first.

Foiling the Designs using the Foil Quill

Select the portion of the design you wish to foil. Select “Draw” in your cutting panel. Set the pressure appropriate for drawing with a pen. I set mine a bit higher. Do some small tests to see how your pressure, speed and choice of tip work with your foil.  Once your cutter has completed “drawing”,  remove the Foil Quill from your cutter, and replace the blade assembly in the holder.  Without moving the mat or cutting head, cut out the shapes on which you foiled.

Foil the large Shamrock

Cut the large shamrock from your preferred media. If you plan to use the Gemini Foilpress foil, turn on the Gemini Foil press, and insert the heating plate. Set the temperature to medium. Cut the large shamrock from white cardstock.

Large Shamrock for Foiling

Large White Shamrock

When the Gemini Foilpress beeps and a green light shows next to the Medium heat setting, place the foil, shiny side down on the Foilpress plate. On top of that, place the right side of the large shamrock down over the foil. Place a half sheet of heavy white cardstock  over the large shamrock. Place a black magnetic shim from the Gemini Junior over the paper shim, and place the foilpress carbon plate over the top. Set the heat for 45 seconds. When the machine beeps, remove the stack from the foilpress and place into the Gemini Junior for the necessary pressure.

Foiling with the Gemini Foilpress

Stack for the Gemini Foilpress

If you will be foiling with a toner sheet and laminator using heat reactive foil, cut the large shamrock from a black toner sheet. You can make a toner sheet by printing a black page using a monochromatic black laser printer. Or you can go to an office supply store and make photo copies of a black sheet of paper. Cut the large shamrock from this toner paper.  Fold a piece of printer paper in half. Place the dull side of a heat reactive sheet of foil down on top of the shamrock, and place both inside of the folded printer paper.  Set the laminator to heat up. Once heated, place the folded edge of the printer paper with its contents into the laminator.

You now have a large foiled shamrock for your foiled slider popup card.

Foiled Shamrock for Slider Popup Card

Foiled Shamrock

Slider Assembly for Foiled Slider Popup Card

Here is how to make a foiled slider popup card with the pieces you have prepared. Close the card base on the center fold line.  Lift the window flap to expose the inside bottom of the card.  Glue the piece that says Irish Blessings to the inside bottom of the opening using quick drying glue on the back of the foiled piece. Next, glue the foiled Irish Charm piece to the top of the tag. Glue the frame over the top of this piece.

Open the card to the inside. Place a strip of double sided tape along the bottom edge of the window flap. Also add strips of double sided tape along the outside edges and bottom of the inside front of the base card as shown below.

Adhesive inside of the Slider Popup Card

Double sided adhesive strips added to the inside of the card.

Remove the covering of the tape, and adhere the bottom edge of the tag, design side down,  to the bottom edge of the window flap. Next,  close the card, so that the back of the card is permanently stuck to the front, forming a pocket. Now when you pull the tag up at the top of the pocket, it pull the flap up with it.

Slider Popup Card Tag Top

Tag Top

Now the popup flap has formed, and it will serve as a platform for your large Shamrock.

Open slider popup card

The front window opens when the tag is pulled up.

The  designs on the inside of the card and on the tag are revealed when the tag is pulled up.

Decorating the Slider Popup Card Front

Now that the popup mechanism is formed, you can decorate it with the large foiled shamrock. Add quick drying glue to the back side arms and lower stems of the large shamrock. Do not get glue on any part of the shamrock that overlaps the window of the base card. Also do not add any glue to any part of the shamrock that hangs above the window fold.

Now that the large shamrock is glued to the popup mechanism,  assembly of the foiled slider popup card is complete.  When open, you can see the foiled sentiment on the tag, and the foiled sentiment on the front of the card.

Open Slider Popup Card

Slider Popup Card front when open

When the card is closed, the inside sentiments and foiling are hidden. The large shamrock is displayed proudly on the front of the Slider Popup Card. You can add a ribbon to the tag to make it easier for the recipient to know to pull on it.

Slider Popup Card Closed

Slider Popup Card Closed

Foiled Shamrock Popup Slider Card

Foiled Popup Slider Card Pin for Facebook

Now it is your turn! Share the with your friends on Facebook. I would love to see what you make with the basic slider popup template.

 

Special credits: The lovely fret pattern I used to create the shamrock design was shared by Diana Tunnicliff. She has shared thousands of her lovely designs with cutter users. She shares the links for her creations in a number of Facebook groups, including the Cutter Software Facebook Group. If you would like to see the process I used to create the Shamrock design, you can watch a couple of my YouTube Tutorials:  Make A Lacy Shape and Create a Lacy Shamrock.

 

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

Julie

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

How to Prepare Cutting Files with Intricate Detail for use with Cricut Design Space and Scan N Cut

You may love cutting lovely projects with lots of intricate detail as I do.  But sometimes the cutting files for those projects load very slowly, if at all, into your cutter software! In this post you will find some tips for making your SVG cutting files easier to use.  Learn to prepare SVG cutting files that are optimized to load quickly and cut more efficiently in Cricut Design Space and Scan N Cut Canvas Workspace.

Note: this post may contain affiliate links.

Here is a cutting file for a popup card with intricate detail that could be problematic for use with some cutters, if it were not properly prepared.  You can find the free cutting file for this project in the Free Resource Library.  Before you go any further, download the zipped files to your computer, double click on the downloaded file, and select Extract All. Then you  can follow along with this tutorial.

Valentine Popup Card

Valentine Popup Card by Julie Flanagan

What can you do if the cutting files won’t work correctly or require lots of tedious editing? This can be very frustrating.  Sometimes details do not load properly into the software.  Lines or shapes may be missing, or they show up in very odd places on the screen. What can you do to prepare your cutting files so that they load easily into your favorite cutting software?

You may wish to learn more about third party software that can be used for creating your SVG cutting files on this blog post.

What do Good Cutting Files look Like in Cricut Design Space?

Upload an SVG cutting file into Cricut Design Space

Now that you have downloaded and unzipped the cutting files for the Valentine Popup Card,  upload the SVG cutting  file for CDS to Cricut Design Space .  Cricut Design Space is a free program that you can use, even if you don’t own a Cricut. Open a New page in Cricut Design Space.

"How

Click on the  Upload icon at the bottom of the left toolbar.   A window will open allowing you to search your computer for the file you wish to use.

"How

Click on the Upload Image button.  Then click on Browse, to search for the file named ValentinePopupCard2-CDS-JulieFlanagan.svg  that you saved to your computer. Double click on the file name, and it should open in the next window you see in Cricut Design Space.

 

"How

Add as many tags as you might like to use when searching for this design once it has been loaded into Design Space. I use popup, card, valentine, heart, scallop, lattice, JulieFlanagan.  I can search using these tags later.  Now, click on the green Save button in the lower right corner of the screen. Another screen opens allowing you to select the image you wish to use.  Click on the image you just uploaded, and you will see a green outline around the image.

Click

"How

Select the green Insert Images button in the lower right corner of the screen.  The design will now appear on the Cricut Design Space Canvas.  Your cutting file is now open in Cricut Design Space. But it is not quite ready to use.

"How

Preparing to Cut a Design in Cricut Design Space

Before doing anything else to this design, notice the Layers on the right side of the screen. There are four layers, two with score lines, and two with the card shapes. You first need to click on the score line layer at the top of the panel. This highlights the score lines on the popup portion of the card.  Currently these lines are designated as cutting lines. You need to change them to score lines.  Under Linetype at the top of the screen, select Score.  Now these lines will not be cut. You will be directed to use the scoring tool with these lines when you go to Make the project.

"How

Repeat this process with the second score line layer for the card back.  Select Score from the Linetype drop down menu.  Now all score lines will be scored rather than cut when you send the file to cut.

"How

Attaching Score Lines to their Cards

Before you can cut your project, you still need to Attach the score lines to their cards. You cannot do that yet, because all design pieces are grouped.  Right click on the shapes on the Canvas and select Ungroup.  Now on the Layer panel on the right side of the screen, hold down your Shift key, and click on both of the layers, Score and Cut for the popup portion of the card (light pink in this case.  These two layers will now be highlighted, and you will notice that both layers on the Canvas are now selected.

"How

 

Now select just  the backing card (Burgundy) and its score layer from the Layers panel on the right side of the screen while holding down the Shift key. Right click your mouse, and select Attach.

Ready to Make It

Click on the green Make It button in the upper right corner of the screen.  You should now see only two mats ready for scoring and cutting.

"How

 

Other Files Not so Ready for Use in Cricut Design Space

You may have experienced SVG cutting files with Intricate details that need a whole lot more preparation for use in Cricut Design Space. If you are making your own SVG files in third party software, you may have run into some frustrating issues in preparing them for cutting in Cricut Design Space. Are your files very slow to load? Do you get error messages indicating that the design is too large to load? Are each of the tiny shapes in the design on its own layer?

"How

 

Are each of the many tiny score lines of a popup card on its own layer, and needing to be changed to score in the Linetype window? These tiny lines are very hard to select either from the Canvas or from the layers.  Changing each tiny line from cut to score takes way too much time!

"How

How to Prepare Cutting Files with Intricate Detail for use with Cricut Design Space 

There is a solution for this issue. Wouldn’t it be wonderful if all of our multi-layered, intricate projects would import into Cricut Design Space in just a few simple layers, instead of hundreds of layers?  The solution lies in the preparation of your files in your design software.  Not all cutter software includes the necessary editing features to achieve this. What is the secret?

Design

Layers or Line Colors.

Create your designs with score lines on different layers  from the cutting lines. An alternative is to assign one line color to score lines, and use another color for the cut lines.  If you need to cut pieces out of different colors,  keep the score lines for each colored piece separate from score lines on other colored pieces.

Select by Layers or by Line Colors

Once you have arranged your design pieces by layers or assigned line colors, you need to be able to select all the same linetypes by layer or by line color in your software.  Not all software can do this.  For example, The Valentine Popup Card has blue lines for mountain folds, red lines for valley folds, and black lines for cut lines. However, the score lines need to be on different layers or different line colors from those used for the backing card.  For my design, I needed four layers or line colors; two cards, and two sets of score lines.

For example, you can select by line or fill color using Illustrator, Inkscape, and Silhouette Studio. You can select by line color in Pazzles software. You can select by layer in Make The Cut and Sure Cuts A Lot.

Make Compound Paths from Selections

Once you select everything that has the same line color (stroke) or the same layer, you need to make a compound path (Illustrator and Silhouette Studio), or use Combine (Inkscape), or Group with Transparency (Pazzles) or Join (Make The Cut) or Merge (Sure Cuts A Lot).  Most cutter software includes a simple group or ungroup feature, but Cricut Design Space does not recognize all groups in imported SVG files.  Properly designed Compound Paths should import into Cricut Design Space in fewer layers, making it easier to select the layers that need to be assigned a different line type.  Cricut Design Space does appear to recognize compound paths.  Those compound paths may not be broken in Cricut Design Space, so keep that in mind.

DPI sizing for SVG Files in Cricut Design Space

If sizing of your project is important, then the SVG file needs to be exported with a DPI of 72 for it to import into Cricut Design Space at the correct size. This is the standard DPI exported by Adobe Illustrator, Pazzles InVue software, and Silhouette Studio Business Edition.

Sure Cuts A Lots has the option to export SVG for Cricut Design Space, which automatically exports at 72 DPI.

If you want your SVG export from Inkscape or Make The Cut to import at the correct size into Cricut Design Space, you will first need to Select All (Ctrl+A) in your software, and reduce the size by 80%. To do this in Make the Cut, lock the aspect ratio for the Height and Width fields at the top of the screen. Type in 80% in either the W or H field and press Enter. Now export SVG (Ctrl+Shift+S) and import SVG into Cricut Design Space. It will import at the correct size.

 Additional Tips

For tips on how to cut and fold popup cards, see this blog post. 

To learn more about importing and using cutting files for a popup card in Cricut Design Space, see this blog post.

 

Learn how to prepare cutting files with intricate detail for use with Scan N Cut

The built in software on Scan N Cut machines is limited in the number of shapes or layers that it can use. It may not recognize all of the tiny details, and tell you that the file cannot be used. Brother Canvas Workspace software, a free software download,  may also give you a message that tiny details may be lost when a design with intricate detail is imported.  As a side note, my CM350 would not load some detailed files, while the newer SDX225 loaded it fine.

Avoid overloading Scan N Cut memory by using the same suggestions listed above for making compound paths in your design software, before trying to import into Brother Canvas Workspace or before trying to import your cutting file designs directly into the machine.  By making compound paths in your design, you should have much less difficulty getting your Scan N Cut machine to handle your designs with intricate detail.

Page Size Limitations for Scan N Cut Machines

When creating cutting files for use with Scan N Cut, it is very important that all design details fit on a single canvas, either 11.5″ wide and 11.5″ long, or 11.5″ wide by 23″ long. Any design pieces outside of this workspace will cause the design to be automatically resized to fit the workspace. All design pieces in the cutting file will be reduced in size so that all of them fit within the cutting boundaries of the virtual mat.

While many cutter software programs allow designers to move pieces off of the virtual mat so that all of the pieces of a huge project are in the same file, this practice will be problematic for Scan N Cut users.

Larger designs need to be broken up into several separate files. Select all design pieces that will fit on one virtual mat, and export as SVG as  a page, such as PopupCardPage1. Then select the next set of pieces and export with the same file name, but with Page2, such as PopupCardPage2.  Then you can place all of the necessary files for a single project together in a single folder on your computer.

DPI sizing for SVG Cutting Files for Scan N Cut

If sizing is extremely important for your designs, make sure your SVG files are exported with a DPI of 96 for use with Scan N Cut.  If the DPI is set to the Illustrator standard of 72 DPI, then the design pieces imported into either Canvas Workspace or directly to the Scan N Cut machine will be too small.

Inkscape SVG exports are automatically sized to 96 DPI.  SVG cutting files exported from Make The Cut follow Inkscape parameters, so those files import into Canvas Workspace and Scan N Cut at the correct sizes.

Sure Cuts A Lot has an option to save your designs in the native FCM format for use with Scan N Cut. FCM export is better for use with Scan N Cut. The DPI sizing will automatically be correct, and FCM files will often load more quickly and efficiently to the Scan N Cut.

Converting Files from SVG to FCM

Using Brother Canvas Workspace, import your prepared SVG file by going to the File menu in the upper left corner of the screen. Select Import.

"How

Now you need to assign the score lines layer to draw instead of cut. To do that, click on the Layers icon, third icon down on the toolbar on the right side of the screen in Canvas Workspace.  To do that, click on the blade icon on a layer that appears to be black, You will have a cut or draw option. Select Draw for those layers which you want to score rather than cut.

 

"How

Your Layers panel should now show a pen icon on each layer that you want to score rather then cut, and a blade icon on each layer that you wish to cut.

"How

Now, you can go to the File menu, and select the option to Export FCM file.  You may get a Warning: “Tiny objects are automatically removed when converting to FCM because it is too small to cut.”  Ignore this warning if you have prepared your SVG file with compound paths. Click on OK. You will not lose Intricate or tiny details in your cutting file, if you have properly optimized it in your design software. 

"How

A window will open, allowing you to type in a File name and to select a location where you would like to save the FCM file.  Click on the Save Button.

"How

You can now share this FCM file, or add it to a thumb drive you plug into the USB port on your Scan N Cut. Then you can load the file from the USB thumb drive to your Scan N Cut.

Sending your prepared file to the Scan N Cut Wirelessly

You do not have to export your design in FCM format if your Scan N Cut has wireless capability.  All SDX models have wireless capability. Older Scan N Cut models may require the purchase of a wireless card in order to send files wirelessly from Canvas workspace directly to the machine.  To send wirelessly, go to the File menu at the upper left corner of your screen and select Transfer FCM via Internet.  You will get a message indicating the the file is ready to use on your Registered Machine.

Turn on your machine, place your media on the mat, and load the mat.  Select the option to Retrieve Data either from USB thumb drive, Machine, internet wifi or USB cable.

After you  load thedesing into your machine, edit the design. Next, select the portion of the file you plan to cut this pass.  Indicate whether you will be drawing or cutting. You may use an embossing tool in the universal pen holder. Or you may use the Brother embossing tool for your score lines. Select Draw for the score line portion of the design. Then select Cut to cut the cutting lines.

Assemble Your Popup Card

When you have finished cutting and scoring the popup card, you repeat the process to select the card backing. Then cut and score it. Fold it and assemble it.

"How

Additional Tips for using SVG files with Scan N Cut

See this blog post for more tips for using SVG files with Scan N Cut.  See also this blog post for more help with folding popup cards.

Make a Valentine Popup Card

"How

Cut and assemble this card. Create and use a topper, sentiment, or image of your choice on the front of the card. I would love to see a picture of your creation! You can send me a picture in the CutterCrafter Facebook book, so others can see it.  If you have any further questions, please let me know! If you enjoyed this post, please share on Facebook, Pinterest, and Instagram. Be sure to follow my blog for more great tutorials and free cutting projects!

 

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

Julie

 

 

 

 

Best Paper for Cutting

What is the Best Paper for cutting with your electronic cutter? The answer to this question depends on what you want to do with the cut paper. Are you wanting to cut very intricate designs? Are you wanting to make popup cards? Do you want to print on the paper before or after cutting? Are you cutting very thin paper or very thick paper? Do you need to emboss your paper? There are many factors to consider in your paper choices.

Best Paper

Best Paper for Cutting

There is some excellent general information about paper called The Ultimate Guide to Card Stock posted here.  And there is excellent information about paper weights here.

No matter which paper you choose to cut, you must do test cuts. Test cuts help you determine the optimal settings on your machine. See this document for test cut suggestions.

Note: Some affiliate links may be used in this post. I am affiliated only with products that I use. When you purchase products using my affiliate links, it does not cost you any more, but I will share some commission. Thanks!

Machine Choice

Not every machine can cut every different type of paper well. For example the Cricut Maker can cut Tissue Paper,  Construction Paper and Crepe Paper very well using its rotary cutting wheel.

Cricut Explore or Cricut Maker

Rotary Blade Kit for Cricut Maker

But other electronic machines may require special stiffening to be cut these thin papers. And most machines will not cut these very thin and very fragile papers at all.

Silhouette machines, such as the Silhouette Cameo can cut lightweight cardstock and text weight papers very well. But these machines are not rated to cut heavier cardstock or heavier media.

Is the Best Paper Made of Hardwood or Softwood?

Every paper mill has its own formula for creating paper. All use hardwood and softwood to make their papers. But the proportions of hard to soft woods used in the papermaking process varies. When you find paper that works extremely well for the projects you like to make, take note of the mill that produces that paper. You might want to consider purchasing your favorite papers in quantities. When you get some papers that do not cut well for the projects you like to make, avoid purchasing papers from the mills that produce them.

For example, I purchase inexpensive paper made by Georgia Pacific for test cutting new designs if they are not too intricate. But when making final project cuts and intricate designs, I prefer to use papers by Neenah or Colormates from Worldwin. These papers seem to be crispier, and cut without shredding. Even very intricate designs cut very cleanly on these papers. Crispy papers have a higher hardwood content that make them cut better on electronic cutting machines.

However, stiff and crispy papers may crack under pressure when using Die Cutter/Embossing machines. In this case, it is important to test small samples for embossing, before you purchase in bulk. You may find that paper that cuts best on the electronic cutter, is not the best paper for using in a pressure embossing machine.

The Best Paper for Light Weight Projects

Tissue Paper

When you want to emboss many, many layers of tissue paper, embossing folders used with Die Cutter/Embossing machines work great. However, tissue paper may rip and tear under a cutting blade in a cutting machine. For this reason, a rotary blade, such as that available for use on the Cricut Maker works best. You can cut some amazing flower petals from tissue paper using the Cricut Maker and rotary blade.

Best Paper

Cricut Maker

Use a light tack mat, or the project may tear when you remove it from the mat. Do not attempt to cut any shape smaller than 3/4″ using the rotary blade. Cut larger simple shapes from tissue paper for best results.

If you are needing straight cuts, a hand-held rotary tool may work for cutting multiple layers at a time. Then you can use scissors to make any necessary curved cuts.

Crepe Paper

Crepe paper comes in a wide variety a weights and attributes. When making crepe paper flowers, getting a quality crepe paper that stretches nicely is important. Crepe paper comes in many weights. You may be able to cut heavy crepe paper, ironed between two layers of freezer paper with a regular blade on your electronic cutter. But I have found that if I want to cut crepe paper on a cutter, Cricut Maker using the Rotary blade is the only machine that will do it well without tearing. Again, do not plan to cut any shapes smaller than 3/4″.

Crepe paper rolls for decorating may not be your best choice for cutting. This type of crepe paper is very thin, and stretches very little.

Construction Paper

Construction paper is very inexpensive. But it is also tears very easily. Its fibers are very loose. Cutting blades rip and tear in the cutting process unless using a rotary cutting blade. Use the rotary blade on the Cricut Maker for simple cuts on construction paper. Otherwise, scissors may cut the best. Construction paper is not always the Best Paper option for use with cutters.

Vellum

Translucent vellum used for crafting is generally a thin, but crispy paper that cuts well with a blade on electronic cutters. It comes in a text weight or as cardstock. The text weight paper is very fragile, so should be handled carefully. Translucent vellum cardstock works extremely well with line embossing on electronic cutters. And it cuts very well, too, without using a special backing or freezer paper.

You can create some lovely parchment type crafts using vellum, an embossing tool, piercing tool and cutting blade on your electronic cutter. If your machine does not have piercing and embossing tools available, it is possible to use hand embossing or piercing tools in a pen holder. The tip of a blade can produce a pierced effect if you don’t have a piercing tool.

Pazzles InVue Cutter

Pierced, embossed, and cut Vellum popup butterfly

 Scrapbook Paper

Decorative scrapbook papers are fun to use on cards and scrapbook layouts. Most cutters can cut scrapbook paper without a problem. But some scrapbook papers cut better than others. Some scrapbook papers made of layers may split, bunch or tear when cut. If you have papers that give you problems, avoid tiny cuts. Use them for cutting larger shapes. Cutting small welded text with sharp angles can result in lots of tearing. It is better to use nice crispy paper without a white core for intricate cuts and tiny text. If you find a brand that cuts well, stick with that brand for cutting with your machine.

Text Weight Paper

Paper that feeds into printers is usually text weight. 20# text is very light weight printer paper. 24# paper is better than 20# for double sided printing. 37# text weight paper is very nice for print and cut projects that do not need to be stiff. You can use shimmer papers for making lovely 3D flowers. This paper is described as 18 GSM (32/80lb Text) , The key word is “text” – this is NOT cardstock. It feels like quality letterhead paper. It has a smooth, Satiny Metallic finish.

Text Weight Papers can also be sold in heavier weights. Even up to weights that are nearly equivalent to medium weight cardstock. Be sure to read the weight specifications. Is it Text Weight or cover stock? Even more importantly, try some test cuts. Does it cut well for your purposes? If you need to print on it, will it feed through your printer smoothly? It is recommended for use in printers? Heavy cardstock may not work well for cutting around printed images.

Be sure to use a light tack mat when cutting light weight papers. Light weight papers may not come off of a brand new, very sticky mat. At least you should condition a new mat, and do test cuts on heavier paper on a new mat before using it with lightweight paper.

Best Paper for Cardstock Projects

Cardstock is available in weights from medium weight 65# up to  very heavy weight 110#. 70#, 80#, 90#, 100# and 105# are also common cardstock weights. You may want to have a variety of weights on hand for different projects.

Medium Weight Cardstock

65# cardstock is the most common medium weight cardstock. It can be used for cards, scrapbook photo mats, stamping embellishments, home decor, gifts and other crafting projects. Some medium weight cardstock cuts well, and others do not cut well on electronic cutters. If you have some medium weight cardstock that does not cut well on your electronic cutter, try using it for embossing on cards and embellishments. It may also be used for making simple shapes or photo mats.

It is easy to assume that your cutter is broken when nothing will cut right. However, “mushy” paper is the culprit for bad cuts more often than not for me. Also, be sure to check the cutter maintenance tips to rule out other causes of poor cuts.

Best Paper

Cuts before and after cutter maintenance

Heavy Cardstock

Any cardstock above 80# is considered to be heavy weight. 100# cardstock is great for coloring, molding, and shaping for 3D flowers. You will love 110# cardstock for creating heavy duty boxes and 3D paper projects. 100# cardstock is great for making popup cards. You will like using 80#-90# cardstock for making cards, intricate frames, borders, corners, etc . If you prefer cutting heavy cardstock, stay away from the cutters that are limited to cutting medium weight cardstock.

Some heavy cardstocks have polyester fibers in them, which make them strong. But these polyester fibers make them much more difficult to cut cleanly, especially on intricate designs. The polyester fibers also are very hard on blades, dulling them quickly. These textured papers make very nice cards and photo mats. However, they may not be the Best Paper for cutting with your electronic cutter.

Watercolor Paper

Watercolor paper can have different weights and densities. These papers are great for watercolor projects. Cutting watercolor paper into simple shapes may not be problematic. But it might be best to cut only simple, basic shapes from it. Because watercolor paper is not crispy, it may tend to bunch and shred by the blade. You may be able to cut shapes around your watercolor designs if you are careful.

Matboard

Professional quality photo mats are made from 4-ply matboard . Matboard is very stiff, and very difficult for most electronic craft cutters to handle. Some of the cutters that can cut with up to 1000 grams or more of pressure can cut 2-ply matboard up to 2mm thick. The cutting blade must also be able to handle the thickness of the Matboard. Some cutters, such as Scan N Cut, have the pressure rating for cutting heavier materials. But they are limited in the thickness that they can handle. Scan N Cut 2 is rated to cut media no thicker than 1.5mm. Read more about cutting matboard with the Knife Blade on the Cricut Maker here.  Pazzles Vue can cut 2 ply matboard up to 2mm thick.

Scan N Cut 2 cuts media only up to 1.5mm thick. The Scan N Cut DX to be released in the Fall of 2018 is boasting a 3mm thickness cutting option. Cricut Maker cuts media up to 2.5mm thick, but would require the optional Knife blade to access the pressure needed for cutting thicker media. Pazzles Vue cuts media up to 2mm thick. Some of the KNK machines will cut Matboard, as does the Silver Bullet line of cutters. Be sure to check your cutter specifications before investing in Matboard to cut.

Chipboard

Chipboard comes in many thicknesses and densities. Some chipboard is made of multiple layers. Some is coated on a single side, while others have a coating on both sides. Most cutters can handle cutting cereal boxes, which is flexible chipboard. Some chipboard is not flexible. That type is most difficult to cut. Some chipboard shreds during multiple cutting passes. There is chipboard available that cuts well without shredding. Here is an excellent article about chipboard. Cricut sells 11″x11″ chipboard made specifically for use with the Cricut Maker. Silhouette sells a chipboard colored cardstock, as regular chipboard cannot be cut on Silhouette machines.

I prefer cutting chipboard that will cut in a single pass. This is because the density of chipboard can cause a cutter to skip steps. If this happens, successive passes would not be in exactly the same location as previous passes. This results in shredding of the chipboard and very poor cuts. If multiple passes are necessary, it is best to start with lower blade extension and cutting pressure, then increase these settings for the next passes. This reduces the possibility of missed cutting steps. If you need thicker chipboard pieces, you might want to try cutting several pieces of .022″ chipboard, and gluing them together to make your project. Do not plan to cut intricate designs from chipboard.

Cricut Maker users may cut chipboard up to 2mm thick with the optional knife blade. The interesting thing about using the chipboard setting in Cricut Design Space, is that chipboard and other thicker, denser materials do not use a cutting pressure any more than 750 grams. The secret to success for this machine is the slow cutting, and many, many passes. The blade needs to have sufficient cutting surface to cut completely through the thickness of the chipboard.

Best Paper Brands for Cutting

I have been using electronic cutting machines since 2004. The brand of paper that I have had consistently excellent cutting results with is Worldwin Papers, I have used most of their papers varying from very light weight to very heavy weight, and all of them cut with excellence on my cutters. Their textured 65# Cutmates line is guaranteed to cut well on any electronic cutter. The selection of colors in the smooth 65# Colormates makes it to be much in demand among cutter users. My personal favorite smooth paper by Worldwin is the 90# Colormates Smooth and Silky. Their colormates line of heavy textured cardstock is also wonderful to cut. I love their metallics as well.

If you cannot find the Worldwin papers you need at Amazon, you can purchase your favorites from The Paper Mill Store.

When I need low cost paper options that I can get quickly locally from Michaels, I purchase Recollections cardstock . Their 65# cardstock generally cuts well, as does their very heavy 110# cardstock. 

Paper Brands to Avoid

I avoid papers from Joann. Their Core dinations  brand does not always cut well. I save this paper for purposes other than cutting on my electronic cutters. Paper sold at Walmart is inconsistent for cutting purposes. One color in a package may cut OK, while then next color will not cut well at all. These may work for simple shapes, but I stay away from their papers when cutting intricate projects.

Best Paper Hints and Tips

Humidity

Nice paper for cutting may not cut nicely if it has been exposed to humidity. Pressure and blade settings may change with the environment. What cut well this morning may not cut so well at the same settings in the afternoon when the air conditioning is running. Always do test cuts when environmental changes occur.

Storage

Store your paper in Zip lock bags after you have opened its original packaging. Two-gallon zipper bags fit 12″x 12″ papers well for storage. Storing them this way will prevent the papers from collecting excess moisture that can hinder cutting quality. Moist papers get “Mushy” and may tear and bunch during cutting.

Emboss the Cut

If you have some paper that is not cutting well, try using an embossing tool or scoring tool in the machine over all of the cut lines a couple of times at very high pressure. Then cut as you normally would. The embossing tool compresses the paper along the cutting lines so that you can get much better cuts.

Drying with Heat

Some have mentioned drying paper that has soaked up moisture in the oven. If you attempt this trick, be sure to keep an eye on the paper, so that it does start burning. Using a low temperature in a dehydrator for a longer period of time might be safer. Check on the paper at regular intervals. Some prefer to dry out paper using an iron.

Chipboard

After removing chipboard from its packaging, it gets thicker overnight. New chipboard straight from the packaging requires different settings than would be required if the paper sits out overnight. Cricut recommends letting its chipboard sit out of the package for a day before cutting for best results. Chipboard is very absorbent, and sensitive to environmental conditions.

Be sure to use a high tack mat and possibly tape the edges of chipboard and other heavy media to the mat to keep it from moving around during cutting .

Best Paper Cutting Settings

Because paper is very environmentally sensitive, the same paper may require very different settings. Those who live in very dry climates will need to use less cutting pressure than those who live in humid environments. For this reason, performing your own test cuts is extremely important. Don’t rely on a published list of settings or presets. Sometimes different colors of paper in the same package can require different settings. What cut well yesterday at certain settings may require different settings today. Be sure to do test cuts at the beginning of each cutting session, and any time you make color changes or environment changes.

Best Paper Conclusion

If you are faithful to do test cuts, you will be more successful cutting any papers you have in your collection. Be sure to keep lots of inexpensive paper that cuts well, on hand for doing project test cuts. Save your expensive paper for the final versions. This will save you lots of frustration.

The paper that is best for you depends on what you like to cut most, and what machine you have. Special tools available for use with your cutter can also make a difference in how they cut.

Here is FREE cutting project that you can use to check how well your paper cuts with each of the tree layers. The hearts layer provides some intricate cutting,  while the white layer provides a simple shape to cut. The Brown layer has some intricate inner detail. You can use this project on a card or scrapbook layout.

Best Paper

Best Paper for Cutting

Best Paper

Love Football Border

 

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

Love,

Julie, cuttercrafter.com

Pazzles Inspiration Vue Cutter Review

Pazzles Inspiration Vue may be the electronic cutter you need. It ranks among the top electronic cutters. The Vue is a powerful, but simple to use machine. You can cut many different types of materials with it. And with optional accessories, you can also use the Pazzles Inspiration Vue to cut, draw, engrave, emboss, pierce, and distress many media types. The Pazzles Inspiration Vue is the choice of beginner and well as professional crafters. This article reviews the features of this amazing machine to help you decide if this is a good choice for your crafting needs.

Inspiration- Vue Print and Cut

Note: I may have used some affiliate links in this review. I am affiliated only with products that I use. When you purchase products using my affiliate links, it does not cost you any more, and the tiny commission that I get contributes towards the costs for maintaining my blog. Thanks for your support!

What Do You Want to Cut?

Cutting Vinyl with the Pazzles Inspiration Vue

The Pazzles Inspiration Vue cuts vinyl of all types, whether the vinyl is repositionable wall vinyl, permanent outdoor vinyl, heat transfer vinyl, vinyl window cling, Stencil Vinyl,  Glitter or Flocked vinyl or other types. It is recommended that you cut your vinyl on either the 12″ mat or the 24″ mat. Reserving a standard cutting blade for cutting vinyl ensures that you will always get smooth cuts with for your vinyl projects.

Regal Split Monogram

Split Regal Monogram on a Ceramic Tile

You can make wonderful gift items such as the customized tile above using your Pazzles Inspiration Vue electronic cutter. The design for the shirt below was a special request from my husband. The Pazzles InVue software that ships with the machine,  allowed me to create the cutting design from an actual photo of my husband fishing.

Pazzles Inspiration Vue

Glittered Heat Transfer Vinly project

Cutting Heavy Cardstock with the Pazzles Inspiration Vue

Entry level cutters do not have sufficient cutting pressure to allow users to cut heavy media. The Pazzles Inspiration Vue boasts of up to 1000 grams of down pressure, making it rank among the top home crafting cutters. It can cut media that is up to 2mm thick. So it can cut even tough chipboard. If you love to cut 3D projects from heavier media, you will need a more powerful machine. This machine boasts of three times the cutting pressure of the legacy Cricut machines as well as the Cricut Explore models. And it has about 4 times the cutting pressure of Silhouette and Craft Robo machines. The print and cut embellishments used on this card were all created using the Pazzles Inspiration Vue and its InVue software.

 

Pazzles Inspiration Vue

Fall pop-up Card

3D boxes such as the Trailer Gift Box below are much more stable when cut from heavy cardstock.

 

Pazzles Inspiration Vue

3D cutting projects

Here is another project that required heavy cardstock. If you love making sturdy 3D projects, you will be happy if you have a cutter that can handle cutting the required heavy media.

Pazzles Inspiration Vue

Flower Mailbox

Projects like this Snow Globe Box Card last a lot longer on display when its pieces are cut from heavier cardstock. Pazzles Inspiration Vue cuts these so efficiently! The intricate snowflake detail cut beautifully on this machine.

Pazzles Inspiration Vue

Snow Globe Box Card

Engraving Metal with the Pazzles Inspiration Vue

You can use Pazzles optional Diamond Tip engraving tool to engrave on metal. I recently engraved on a dog tag for our puppy. The tallest letter was .057″ and the smallest letter was  .06″ tall. The entire tag was only 1.5″ wide. I was able to fit four rows of text on the back of the tag with our puppy’s name, address and phone number. Here is the front of the tag. (I blurred the phone number.) You can cut thin aluminum metal with the blade.

Pazzles Inspiration Vue

Engraving On Metal

 

Cutting and Piercing Delicate Designs in Vellum with the Pazzles Inspiration Vue

You can also cut very fine and delicate media such as vellum. I used Pazzles optional Piercing and Embossing tools on vellum to create this popup butterfly anniversary card.

Pazzles InVue Cutter

Pierced, embossed, and cut Vellum popup butterfly

 

Cutting Fabric with the Pazzles Inspiration Vue

Cutting fabric with this machine is great. I was amazed at how nicely my Vue cut the doily and the flowers out of fabric for this Easter Bonnet. It is good to reserve a blade dedicated to cutting fabric, since paper can dull blades quite quickly.

Pazzles Inspiration Vue

Fabric Doily Easter Bonnet with Fabric flowers

Cutting Wood with the Pazzles Inspiration Vue

Yes! This machine cuts thin balsa wood or basswood up to 2mm thick. Here is a Captain’s Wheel design that I cut. Covering the back of the piece of wood with blue painter’s tape before cutting keeps the thin wood from splitting during the cut and while lifting from a very sticky mat.

Pazzles Inspiration Vue

Captain’s Wheel cut from thin wood, with pen writing.

Making 3D Flowers with the Pazzles Inspiration Vue

If you love making 3D paper flowers as I do, you will be happy to know that this machine cuts lots of different types of paper petals for making beautiful flowers. This bouquet includes some vellum flowers, some made from printed scrapbook paper,  some from medium weight cardstock, and some from heavy cardstock.

Pazzles Inspiration Vue

Musical Paper Flowers

Cutting Rubber Stamps

You can create your own custom rubber stamp designs using the Pazzles InVue software that ships with the Pazzles inspiration Vue. Then you can cut the rubber using the Pazzles Inspiration Vue. I had an idea for a musical stamp, so I created the design, and let my Pazzles Inspiration Vue  machine cut it out for me.

Pazzles Inspiration Vue

Homemade rubber stamp design.

Cutting Clay, Fondant, Gum Paste and Frosting Papers using the Pazzles Inspiration Vue

You can use Pazzles optional Cake Accessories Kit for cutting clay, fondant, gum paste, and frosting papers. Here is a project I made using thinly rolled Sculpey clay.

Pazzles Inspiration Vue

Clay Cornucopia Fall Decor

Cutting Scrapbook Page Overlays

Scrapbook pages are fun to make using the Pazzles InVue software and cutting with Pazzles Inspiration Vue. This machine will cut a full 12″ wide border or scrapbook page. It is not limited to an 11.5″ cutting width as some cutters are. Here is a scrapbook calendar page that I created. Notice the detail of the embellishments.

Pazzles Inspiration Vue

December Calendar page with fancy embellishments and 3D snowflake flower.

Rhinestone Templates

Designing templates for use with rhinestone designs can be done using the Pazzles InVue software that ships with the Pazzles Inspiration Vue cutter. You can turn any design or test into a rhinestone template design. Then you can cut your template out of rubber designed for cutting rhinestone templates using your Vue. Here is my first rhinestone project.

Cutting Around Printed Images

Before I received my Pazzles Inspiration Vue, I was never happy with the cutting around printed images with my other machines. You will love how the Pazzles Inspiration Vue automatically finds the registration marks, and cuts perfectly around printed images that are up to 8.5″ wide. This project would have been extremely difficult to cut and assemble if I had cut each tiny element separately. Instead, I chose a number of appropriate designs from the generous Image library available in the Pazzles Craft Room, and printed the shapes. Then I had my Vue cut around the printed images. It did a great job!

Pazzles Inspiration Vue

Teacher’s Cascade Card with print and cut Embellishments

You can see more of my Pazzles creations here .

What is your Cutting Skill Level?

If you are a novice cutter user, you will appreciate how easy the Pazzles Inspiration Vue cutter is to learn to use. With the great support offered by Pazzles to its customers through the Pazzles Craft Room, you can learn to start using your Vue to make amazing projects right away. The Pazzles Craft Room has hundreds of projects like the above, ready for you to download, cut, and assemble. The downloaded projects are yours to keep, even after your membership expires. And their Angel policy allows you to use the designs commercially. You can get almost all of the above projects for free as a member of the Pazzles Craft Room.

Ease of Use

The click style blade holder in the Pazzles Inspiration Vue makes setting blade depths easy. The software tells you where to set the blade for the media type that you have selected to cut. The blade holder and blade are the same ones that the Deep Cut blade holder and blades that legacy Cricut machines used. The blades are easy to insert and remove.

The machine automatically loads your mat. The optical reader sets the starting point at the same place every time. The optical reader also makes cutting around printed images so much easier!

More Advanced Users

You will love the flexibility you have in using the Pazzles InVue software. It has all of the basic functions with which you are familiar from other cutting software. But it also has lots of advanced design and editing functions. Some of these advanced features are not available even in the most expensive professional design software programs. Pazzles developed their InVue software with all the advanced design features that its staff and professional users were familiar with, and used to using.

The amazing thing about this software is that it is provided for FREE with the purchase the the Pazzles Inspiration Vue. And it is available for a VERY low price for those who wish to purchase it separately and use as third party software with other cutters. This software, combined with the advanced cutting technology in the machines, means that you most likely will not outgrow its functioning for your crafting purposes.

What is your Price Point?

Some people like to start their cutting adventure with a very inexpensive machine. Then they start saving their money, and plan to purchase a better machine when they outgrow the features of that machine. Others prefer to get the best machine they can get, so that they won’t be outgrowing its features any time soon. Pazzles Inspiration Vue is one of those machines that meets your growing cutting needs, without a need to upgrade to bigger and better machines later on.

Purchase options

There are several shopping options, making your purchase of the Pazzles Inspiration Vue cutter affordable. You can check out those options here.  If you wish to  purchase the machine outright, you will get the best price by first joining the Pazzles Craft Room for one month. While a member, you will receive a 15% discount on all Pazzles purchases. So you can get a 15% discount on your machine, and all the optional accessories you need. I save on shipping by purchasing all that I think I might need for a year. I  like to keep three good mats and three extra blades on hand at all times.

With your outright purchase, you will receive several months of free membership in the Pazzles Craft Room. Be sure to take advantage of that time to view all of the training videos in the video library. These will help you get a great start in using your new machine. Also, be sure to  download all of the cutting files and projects that you can get while you are a member. You can download up to 400 files per month, if you are diligent to download 40 files every 70 hours. These are yours to keep. While you are a Pazzles Craft Room Member, all downloads are FREE!

If you find that you love all the new projects that are regularly posted, you may decide that you want to maintain your Pazzles Craft Room membership. I really like all of the wonderful projects that they offer so much  that I decided to keep my membership going. The best price for me turned out to be purchasing a machine for $99 with a two year commitment to the Pazzles Craft Room. Another similar option is to purchase a machine for $199 with a one year commitment to the Pazzles Craft Room.

System Requirements

Pazzles Inspiration Vue works on both Windows 7, 8, and 10, and on Mac: OS X 10.9.X & 10.10.X.. It needs a USB2 connection directly to your computer. The InVue software also works on these machines. You will need software to cut to the Vue. You can use Pazzles InVue software or you may use Sure Cuts A Lot.  If you have Pazzles Inspiration Studio Pro 1014, you can use it to cut to the Vue. However, that software is no longer available for sale.

You do Not need high speed internet in order to use your Pazzles Inspiration Vue. Connect to the Internet to update your firmware and software one time after receiving your Vue. You can disconnect your Vue from your computer after making a cut. Then you can repeat that exact same cut with the same settings as many times as you like by pressing the Repeat button on the machine. When you need to make a lot of the same project, this is a real handy feature to have.

Pazzles Inspiration Vue Specifications

This cutter ships with the machine, USB cable, power cord, and converter box, blade, blade holder, and a print and cut mat. The machine will cut up to 1000 grams of pressure using settings of 1-50. You have 5 speeds from which to choose. The click blade holder has 11 different blade depth settings. Maximum cutting width is 12″. Cutting length is 12″ with the standard mat, and 24″ with the 24″ mat. The machine weighs 11.2 pounds, is 22″ wide x 6.5″ tall x 11″ deep. Its roller bar has two permanent pressure rollers, and four more rollers that are removable when cutting thicker media.

There is an accessory tray on top of the machine as well as three slots for additional tools. A support tray for the mat is built in to the front of the machine. You slide it out when using the machine. Then push it in when done.

Pazzles InVue Software Overvue

Cutter Software

Pazzles InVue Software

The InVue software  ships without additional cost to you with your purchase of the machine. It has many outstanding features. For that reason, we will touch only on the highlights. The software has special features not only for cutting, but also for drawing, piercing, embossing, engraving, distressing,  and converting to rhinestone designs. My favorite tools are the replace with a line, and replace with an arc.

The software will import and export SVG files. It will also import and export WPC  files. The image gallery connects to your online account with Pazzles. This allows you to download all new files easily. The software automatically stores these downloaded files in the correct topical file folders on your computer. Downloading files from the online library requires an Internet connection. But once they are saved to your computer, no internet connection is necessary for using them.

Software Pros

There are a variety of welding options in the software. One that is unusual to see is the WYSIWYG weld function. This allows you to arrange design pieces as you wish to see them. Then you use WYSIWYG Weld to get rid of all overlapping lines instantly. It has a nice inline/outline feature. It also has a nice Duplicate feature that lets you fill your page with the selected images.

The software will also convert images to cutting lines. There is a nice Fit text to path feature, which allows you to select any path for the text to follow. I love the Vertical/Horizontal tool, and the corner rounder features as well.

Text

The software will access any fonts installed in your computer’s system fonts folder. It will also access single stroke fonts that you have installed. The software has a very nice text preview window. This allows you to type in text and preview how it looks with any of your installed fonts. I love being able to see the text in  different fonts in a large size before I select  one. Once you have added your text to the layout, you have many options for spacing and kerning. Thickening fonts is easy in this software. Creating mats for  text is also easy. So you can make some lovely word art quickly and easily with this software.

Software Cons

Features that I miss in the Pazzles InVue software are freehand draw, fit object to path,  and  blackout shape. I miss the scissors cuts we had in Inspiration Studio Pro 2010, and the Create a Font option. This software is missing the word envelopes, simplify paths, and smooth small angle tools.

I go back to Make The Cut to use its better tracing options, its Conical Warp, and Texture Snapshot features. The MTC measuring tool and Lattice functions are some tools that I miss as well. Thin paths, Fuse and Weld and the Tiler functions are also features that I still go back to Make The Cut to use.

I go to Sure Cuts A Lot to make instant Knockout Text. We can do this using InVue software, but it takes a few more steps. Viewing and using alternate glyphs in  the private use area of fonts is another feature of Sure Cuts A Lot that I use on occasion. I go to CorelDraw to use the envelope for fitting text to a shape and for creating True Type fonts. CorelDraw and Illustrator have useful batch conversion utilities that come in handy from time to time. Sure Cuts A Lot does a batch convert for Brother FCM files. Pazzles InVue software does not have any batch conversion features.

The nice thing about the Pazzles InVue software is that even if you go to other software to use certain features, you simply export the files as SVG, import into InVue, and you are ready to cut. You get the best of all of the software choices this way.

Conclusion

Now you have an idea of some of the great things that the Pazzles Inspiration Vue can do for you. You need to figure out what your specific needs are. I have 14 different cutters in my collection. Each one has its own special purpose. I select the one that will work the best for the project on which I am working . You need to determine if the Pazzles Inspiration Vue or another machine meets those needs better. Study your options. What do you like to do the most? Get the best machine that you are able to afford that will work the best for your purposes. So the most important thing is for you to use what you have until you can get something better. You won’t really know exactly what you need until you start using what you have!

Free Thankful For You Tag SVG Cutting File

I have created a new cutting file for you using my Pazzles InVue Software, and I cut it on my Pazzles Inspiration Vue cutter. But you can use the FREE SVG cutting file with your own software and cutter. You can get the FREE Thankful For You  Tag  SVG cutting file in my FREE Resource Library. See the link at the bottom of the page.

 

Pazzles Inspiration Vue

Thankful For You Tag

 

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

Love,

Julie, cuttercrafter.com

Baby Crib Popup Card FREE SVG

A Baby Crib Popup Card FREE SVG file is available for download now in the free Resource Library.

Do you need a nice card for a baby shower or gift? This lovely card is decorated for a girl, but it could just as easily be decorated suitably for a baby boy. The card folds flat for delivery. When it is opened, the crib pops out. There is plenty of room inside for you to write a message and sign the card. You can put a gift card inside as well. The card measures 5.25″ wide by 7″ tall. You can resize the card according to your needs.

 

Baby Crib Popup

Baby Crib Popup Card

Supplies Needed for the Baby Crib Popup Card 

Please note: Some supplies may include my affiliate links. I am an affiliate only for products that I use. Your purchase from my links will not cost you any more, but they will help support my blog. Thanks!

Free SVG file for Baby Crib Popup Card

Recollections 110# cardstock for popup card backing

81# text weight Stardream Quartz metallic paper for small Magnolia Flower

81lb Text  Green  Metallics paper for card mats and Pink Metallics paper for the front sentiment and the crib skirting.

80# white cardstock for Crib

12″ 1/8″ wide white satin ribbon

80lb Text Botanic Green Curious Metallics paper for Small Magnolia Flower leaves.

Small dogwood Flowers – Free SVG cutting files from CutterCrafter.com

Dries Clear Art Glitter Glue: Heartfelt Creations

Pearl Stickers

 

Assembly Instructions for the Baby Crib Popup Card

Cutting Instructions for the Baby Crib Popup Card:

Cut out all pieces in your choice of colors. If you wish to resize the card, select all, and resize proportionally so that all pieces fit together well. When importing the SVG file into your cutting software, check the sizing, and resize as necessary. The outside card measures 10.625″ wide by 6.875″ tall. The crib pieces together measure 10.5999″ wide by 3.791″ tall. The sentiment pieces measure 4.973″ wide by 3.182″ tall. The crib skirting piece measures 10″ wide by 1.579″ tall.

The red lines are score lines, set to cut with tiny dashes. If you are importing the design into Cricut Design Space, ungroup all first. If you prefer to use a scoring tool rather cutting dashes, you can import the score line from Shapes, and place those over the dashes. You can then delete the dashes, or hide them on the Layers toolbar. Next,  select each piece with its score lines, right click, and select Attach.

In case you need to change the sentiment, or add more cutting text, the font used was  GE Curviture. 

Folding Instructions for the Baby Crib Popup Card

Make valley folds for the score lines on the outer and inner cards. Make mountain folds on the white crib pieces and the skirting piece. Crease the scored lines using a bone folder or other folding tool.

Shaping and Assembling the Magnolia Flower

See the instructions for shaping and assembling the small Magnolia flower included in the Tips for Cutting Basswood on the Cricut Maker blog post. Scroll down to the paragraph on Decorate Your Cut Basswood Tree. The cutting design for the flower is available in the Free Resource Library.

Glue Crib Pieces

There is a tab on one end of each of the crib piece. Glue the end without the tab over the tabbed end of the other piece. When dry, glue the plain end of the crib over the tabbed end. This will form a 3D box. Press the box flat from side to side to make sure it folds and unfolds easily. The skirting, the piece with the scalloped edge, is next. Glue the plain end over the tabbed end. Place the skirting inside of the crib piece so that the scalloped edge show below the crib rails. The straight edge of the skirting is visible through the crib rails. Glue the skirting at each of the corners formed by the legs. Also, put a dab of glue in a few other places along the bottom crib rail to hold the skirt in position.

Putting the Baby Crib Popup Card Together

Glue the inside mat piece to the inside of the card. Be sure to line up the score lines. Make sure that the card opens and closes easily. Glue the sentiment for the front of the card on to its mat. Glue the mat to the front of the card. Put glue on the back side of the crib. Line up the feet of the crib just inside the bottom of the card. Glue the back side of the crib, with the back left corner snugly in the center fold of the card. Add glue to the left end of the crib piece. Next, close the card, and hold firmly in place. When dry, check to make sure the card opens and closes properly.

Decorate the front of the Card

Add pearl stickers to the ribbon strips. Now glue the ribbon to the top and bottom of the front of the card. Fold three of the butterflies that were cut out of the inner mat piece, and glue just their centers over the butterfly shapes connecting the sentiment on the card front. Next, add a row of 4 pearl stickers to the center of each butterfly. Now, assemble a small magnolia flower, and glue it over the ribbon on the bottom front of the card.

Add Pearl Stickers to the butterflies  on the Inside of the Baby Crib Popup  card.

Place the pearl stickers across the centers of each of the cut out butterfly shapes on the inside card mat. If desired, use more butterflies with folded wings and pearl centers on the front side of the crib. Add any additional greeting on the inside. Now your card is ready to bless its recipient.

Baby Crib Popup

Baby Crib Popup Card

Get the FREE CUT FILES FOR the Baby Crib Popup Card and the Small Magnolia Flower 

You can get the SVG cut files for the Baby Crib Popup Card and the Small Magnolia Flower as well as  some of my other FREE SVG projects from my FREE Resource Library.

 

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

Love,

Julie, cuttercrafter.com

Make an Oval Accordion Card

Oval Accordion Card

Make an oval accordion card.

 

You can make this oval accordion card using the FREE SVG cutting files posted in our Free Resource Library. Make it using as many or as few panels as you like. There are several layers which you can use for the center of each panel, or you can use the base oval for trimming a photo to fit. Add photos and/or sentiments, or  journaling  to the front and back side of each oval as you prefer. The card’s height is 6″, but you may adjust the size according to your needs. You may even add lots of panels to create a mini album. The card folds flat for mailing, with a complete size of 4.5″ x 6″ . It stands alone for display.

Supplies Needed to Make the Oval Accordion Card

Please note: Some affiliate links may be used in this post. I am affiliated only with products that I use. When you purchase products using my affiliate links, it does not cost you any more, but I will share some commission. Thanks!

Digital Paper from Pazzles.
Medium  Weight white Cardstock for printing digital papers
100#110# white cardstock for card base pieces
Colored Cardstock for oval layers
Electronic Cutter (I used Pazzles Vue)
SVG Cutting File from our Free Resource Library
Pop Dots if desired for layers
Art Glitter Glue Dries Clear Adhesive

Software Requirements

The SVG files are suitable for use with Make The Cut, Sure Cuts A Lot, Pazzles InVue software, Cricut Design Space, Brother Canvas Workspace,  Scan N Cut,  Inkscape,  Silhouette Studio DE, Illustrator, CorelDraw, and any other software that will import SVG files. Also included is a PDF file containing assembly instructions.

Paper Choices

Decide how many panels you want for your card. Then select papers for any layers that you wish to use. Print any digital paper you plan to use for the rectangular frame on each panel. You can use printed papers, or solid. If you are using photos,  trim them to the size of the largest oval in the file, or to any size that you prefer. There are several layers to choose from. You can use some of the panels for titles, sentiments or journaling. Select heavy cardstock for the base panels, as they will stand alone better, and be more sturdy for displaying. Use lighter weight cardstock for the oval layers. You do not want these to be too heavy to put unnecessary weight on the upper and lower hinges on the ovals. You may use pop dots to give more dimension to any of the layers.

Cutting Instructions

The cutting files include a single panel for the left side of the base card. The left and center panels are the same. Make multiples of the center shapes for as many extra panels that you need. The panel for the end of the right side of the card is different from the others, as it has no folding tab for the right side of the card. You need only one of these panels. This panel is rotated in the cutting file so that it will fit  better on the cardstock for cutting. You will need an extra printed layer for the front of the card, if you plan to close it flat. Also consider cutting extra oval layers if you plan to use the back sides of the ovals.

Score Lines

The score lines for the side tabs are better created as shallow solid lines, as opposed to cut dashed lines. You can use a scoring tool, embossing tool, engraving tool, or the blade set to a low extension, and cut at a low cutting pressure. You do not want the blade to cut through, but rather to just scratch the surface so that the tabs fold more readily.

Oval Accordion Card

Basic panels for oval Accordion Card

Oval Accordion Card Assembly

It is easiest to decorate the base card pieces before folding. Use glue around the edges of the back side of each layer. Next glue the layers onto the base card. Make sure the rectanglular layer does not overlap the score lines.

Oval Accordion Card

Decorated Panels

After you have decorated the panels, fold the flaps. The panel on the left has the flap folded up with a valley fold. The center panel has the flap folded back with a mountain fold. If you have more panels, the folds will alternate. The panel on the right does not have a flap. Next glue the left edge of the center panel over the flap of the panel to its left. If you have additional panels, repeat this process. Glue the final panel over the flap of the panel to its left.

Oval Accordion Card

Panels Glued Together

Folding the Card

Use a bone folder to crease the panels in the direction of their folds. Between the first two panels there is a valley fold. Between the last two panels there is a mountain fold. Now, place glue on the tiny square tabs between the ovals and the outer frame. The oval on the left comes over the valley fold to meet the the oval to its right. Glue the tab to the back of the neighboring oval, and fold the tab with a mountain fold. The tab on the center oval goes behind the mountain fold of the base card to connect to the back side of the oval to its right. Make a valley fold on this tab. The ovals should end up touching each other. Hold the tabs in place until the glue dries.

Oval Accordion Card

Glue oval tab to neighboring oval.

Fold the ovals in the opposite direction of the folds in the base card. Then burnish creases.

Oval Accordion Card

Connecting Oval Tabs

Fold the card flat. The tabs at the top and bottom of each panel should fold naturally as you help the base card and ovals fold correctly.

Oval Accordion Card

Card Folded Flat

Burnish the folds so that they are creased well. Now you may decorate your card with additional embellishments if you would like to do so. I might add a 3D flower from my collection, depending on who I plan to give it to.

 

Oval Accordion Card

Oval Accordion Card completed

Love,
Julie, cuttercrafter.com

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

Best Software For Designing SVG Cutting Files

What is the best design software for creating SVG cutting files? There are a number of design software choices available. Learn which is the best for you. The most important factor in your design software choice is that it works with your cutter. The design software does not have to have drivers to cut directly to your cutter. But the design software does need to have options to export designs that will work with your cutter. So the cutter you are using, and its software requirements will be a huge factor for you in your design software choice.

Cutter Software

Design Software

Software for SVG Designing

Cricut Design Space

Design Software

Cricut Design Space

Cutters are usually shipped with software that works with the machine. But not all software is created equally. Some machines come only with the drivers necessary to make the machine work. This is true with many professional vinyl cutting machines. Other cutters come with some very basic free design software, such as Cricut Explore and Cricut Maker. Software required to work with these Cricut machines is Cricut Design Space.  Design Space allows you to save your designs on their Cloud, but you cannot save them to your computer or export then for use with other cutters.

You may be satisfied with cutter software that allows you to use only designs provided by the cutter distributor for awhile. But eventually you will want to spread your creative wings to make some of your own designs. Some companies do not provide software with their cutters. They prefer to give you a option of purchasing the software of your choice. In this case, you need to make sure that the software you purchase has drivers for your particular machine.

Brother Canvas Workspace

Design Software

Brother Canvas

Some cutter software allows you to open or import files that you or others have created. But they provide only basic software features. They have very little in the way of creative design and editing tools. For example, Brother has provided the free Canvas Workspace software for Scan N Cut and Design N Cut users. It includes basic design features. But you will likely need to use what is called “third party software”, software made by another company. This third party design software can be used to create your cutting projects. In order for third party software to work with your cutter, it needs to have the option to export designs that will work with your cutter.

Software Import and Export Options

Silhouette Studio

Design Software

Some cutters are provided with full featured design software. This software allows you to import, customize, and create cutting files. But the software may not allow you to export your work in formats that can be used with other cutters. For example, the free basic version of Silhouette Studio is excellent design software, but importing and exporting files in other formats requires paid software upgrades. Being able to export cutting files from your cutter software will be important if you want to use your cutting files with more than one cutter, or if you want to share or sell your files with someone else who uses a different cutter. Be sure to check the import and export options of the software you choose. Another thing to keep in mind is that Silhouette Studio does not allow the export of purchased designs from their online store in SVG format.

Cutters with Full-Featured Design Software

Finally, there are some cutters that are shipped with full-featured design software, that allows you to import and export cutting files. For example, Pazzles includes full-featured design software with the purchase of their cutters. Their software, InVue, (which may be purchased separately from a machine) allows you to import, create, customize, and export your cutting projects in SVG format. It included basic and advanced design functions. Therefore,  this software serves as an excellent low-cost, third party cutting software.

Cutter Software

While there are excellent cutters that do not have these important software options, it is essential that you consider creating your designs in software that does have these options. Therefore using additional design software may be necessary. In this case, make sure that the software you have chosen for your design work will work with the software provided with the machine you plan to use.

Design Software Options

The best time to evaluate software options is before you make your cutter purchase. This gives you more freedom as you consider design software options. So  if you are looking into purchasing a new cutter, now is the time to consider your design software options. Every design software has a learning curve. So once you select a design software, you will need to stick with it for awhile. Learn all of the basic functions in the software that are needed for creating projects for your cutter. Then you can learn to use many of the advanced features in the software. Have patience as you learn.

Free Design Software

Inkscape

Design Software

Inkscape

Inkscape is  open source software that is free. This software has no plugins for cutters, so it is used strictly for designing. It does have many import and export options. Many cutter crafters use Inkscape for creating their cutting files, then export their designs in a format that can be imported into  cutter software. Most cutter software will import SVG or DXF files that Inkscape can export.

Learning Inkscape

The down side to using Inkscape is finding adequate support for using it for cutting purposes. There are many more tutorials available covering Inkscape features today than there were in past years. Inkscape is so full of features for designers of all types, that finding the tools needed specifically for designing cutting files can be hard to find. The best course I have found for learning to use Inkscape for designing cutting files is one produced by Jennifer Maker called Cut Above SVG Design Course

 

Affordable Design Software for Sale

Pazzles InVue Software

Cutter Software

Pazzles InVue is the most affordable third party design software for sale. It is excellent software for designing SVG cutting files. It cuts directly to the Pazzles Inspiration and Pazzles Vue cutters.InVue also allows for importing and exporting SVG and WPC cutting files, making it a great option to use as third party software for use with cutters that have more limited design tools.

Learning InVue

The Pazzles Craft Room offers excellent video training for using this software. You can find some free video tutorials for using this software on my YouTube channel.   I also offer free Cutter Software support for this and most cutter software at the Cutter Software Facebook Group (Join to access free files and discussion group.)

Some third party design software will cut directly to a number of different cutters. This is handy, as you can design and cut your projects from the same software.

Sure Cuts A Lot (SCAL)

The most up-to-date of these software options is Sure Cuts A Lot version 5 . You can download a free trial of this software for 15 days to see how you like it. Even if you cannot cut directly to your particular cutter, you can still create your designs in this software, and export your projects in most common formats, including SVG, SVG for Cricut, and Brother FCM. It can also import a large number of embroidery file types.

Design Software

Sure Cuts A Lot Cutter Software

Learning Sure Cuts A Lot

ScrappyDew has an excellent course  called SCAL Classroom covering how to use Sure Cuts A Lot, including a User’s Manual. There is a special offer for a discount for this course when you purchase the software.

Make The Cut (MTC)

Design Software

Make The Cut Software

The Make The Cut software is excellent software for designing SVG cutting files. You may download a free trial of this software on the download page to get a feel for how the software works. This trial does not expire. Make The Cut is full featured cutting software that will cut directly to many different cutters. It includes many advanced design features. The software imports and exports many different file types. There have not been updates to this software in several years, so plugins for newer cutters are not available. But the software is still quite competitive in the market for those designing SVG cutting files.

Learning Make The Cut

Support for  Make The Cut software is available in the free User’s Manual as well as at the Make The Cut Forum,  at the free MTC-Tuts Yahoo Group (join to access free  tutorials and cutting files), and at my YouTube channel.

Popup Card Studio

Those interested in making popup card designs will appreciate the option to copy and paste designs from the software to its companion software, Popup Card Studio (PCS).   There is a discount available for those who purchase both Make The Cut and Popup Card Studio at the same time. There are free YouTube tutorials for creating popup cards using Popup Card Studio on my YouTube channel. One great perk for owning Make The Cut is the inclusion of  of over 15,240 user contributed cutting files in its Gallery. Popup card studio includes designs for 127 popup cards in its Online Gallery linked within the software. There are some amazing designs included.

 

Not So Affordable Software For Designing SVG Cutting Files

Adobe Creative Suite

Design Software

Adobe Illustrator

Illustrator is the professional vector design software. This cloud-based software includes tools for a wide variety of design professionals in many fields. Hence, it is quite complicated, and difficult to learn the specific design tools we need for designing SVG cutting Files. Illustrator does not offer plugins for direct cutting to cutters. But the files created in Illustrator can be exported for use with other cutter software. Illustrator became popular among crafty cutters who use MAC computers, when most cutter software did not offer support for MAC. Now it is more common to find cutter software that includes MAC support.

Learning Illustrator

Those aspiring to become professional designers may want to dive in to learning to use this software. Comprehensive support for cutter users is severely lacking for this software. I do recommend that if you want to be a design professional, that you get the entire Adobe Creative Suite, as you will likely need more than just Illustrator. I find that I use Adobe Photoshop and Acrobat Pro as much or more than Illustrator. If you plan to tackle Illustrator for designing SVG cutting files, I highly recommend Jennifer Maker’s Cut Above SVG Design Course . Jennifer is extremely diligent to provide personal help for her students in learning to use advanced software tools to create some amazing cutting projects.

Corel Draw

Design Software

CorelDraw

The CorelDraw suite is another expensive vector design software that imports and exports files in many formats. Many professional cutters use this software, especially those who work with laser cutters and wood cutting machines. However, there is not much support for home cutter crafters using CorelDraw.

Favorite Features of CorelDraw

There are only a couple of features that I use in CorelDraw for my design work. My favorite is the Word Envelope that automatically fills a shape with text. See my video tutorial on how this works. The other feature in CorelDraw that I use is their TTF file export. I use this for creating fonts. CorelDraw does  not provide plugins for cutting to our craft cutters, but many laser and CNC machines are shipped with plugin software that works with CorelDraw. If you have a machine that requires the use of CorelDraw, then you will need to invest in this software.

Design Software for Cricut Machines

Your older Cricut machine did not come with design software. You learned to use designs available on cartridges to create some amazing scrapbook pages, cards, 3D projects, and decorations for events. But there are times that you have some very creative ideas that you would like to try with your cutter, and you cannot find exactly the right cutting files in your cartridge collection. So perhaps it is time to learn to use cutter software so you can bring those creative ideas to life.

Cricut

Cricut Expression

There are some older software versions that work with your older Cricut, including Cricut Craftroom, Make The Cut 4.1.0 or earlier, Sure Cuts A Lot 2.0, and FairyCut. But those are no longer being produced, and Cricut Craftroom is being closed. If you happen to have one of these, it would be a good idea to start learning to use it. Even very basic software can be used to create some amazing projects. The latest versions of Make The Cut and Sure Cuts A Lot allow you to use the latest and greatest software features, and transfer your designs to the older software so you can cut to your machine.

Cricut Upgrades

After Cricut Craftroom closes in mid-July, 2018, you will need to make some decisions. If you have a huge collection of cartridges to use with your older Cricut, you might want to consider upgrading to a Cricut Explore or Cricut Maker. Cricut Design Space, which is required for using these machines, does allow you to register your cartridges. Hence you can use all of your cartridge images and fonts on the newer machines. Cricut Design Space does have some nice design features to help you use your cartridge design collection more creatively. The software also allows you to import images and SVG files from other sources. For more information on how to use SVG files in Cricut Design Space see my post on How to Use SVG files in Cricut Design Space.

Do You Need a New Cutter?

You may need a new cutter if your creative needs have outgrown the features available with your current setup, or if support for your cutter has been discontinued.

Cutters

Discontinued Cutters

If you decide you do need a new cutter, it is important to consider your cutter software needs as well. Take some time to research the options available to you. An electronic cutter requires some kind of software to drive it. You need to make sure that the machine and software combination suits your needs. If you already have a favorite software for designing SVG cutting files, will it work with the cutter you are considering?

Note:  Some affiliate links may be used in this post. I am affiliated only with products that I use. When you purchase products using my affiliate links, it does not cost you any more, but I will share some commission. Thanks!

Julie

 

Would you like to see some of my FREE SVG projects? Check them out in my FREE Resource Library.

 

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

 

Impossible Butterfly Popup Card

You can make this lovely Impossible Butterfly Popup Card with the SVG cutting file from the Free Resource Library. It will make a lovely gift for someone special. The card base is made from a single piece of heavy cardstock, and yet the center pops up in a seemingly impossible way! This special Impossible Card includes a dimensional butterfly, whose wings pop out from the card base. The card makes a lovely conversation piece when displayed on the mantle or coffee table.

Impossible Butterfly Popup Card

Impossible Butterfly Popup Card

 

Supplies Needed to Make the Impossible Butterfly Popup Card

Please note: Some supplies may include my affiliate links. I am an affiliate only for products that I use. Your purchase from my links will not cost you any more, but they will help support my blog. Thanks!
Digital Paper from Pazzles.
Medium Weight Cardstock
1 sheet 110# cardstock
Strips of Double-Sided sticky tape 1″ wide
6”x6” grey square jpg file included with the cutting file.
Electronic Cutter (I used Pazzles Vue)
SVG Cutting File from our Free Resource Library
Pop Dots
Art Glitter Glue Dries Clear Adhesive
The Font used for this project is Aubrey Script

 

Printing Instructions

I used Digital Paper from Pazzles. But you may use printed papers of your choice.
Resize the digital paper to the following measurements, and print on medium-weight cardstock.

Impossible Butterfly Popup Card

Printed Digital Papers

Light Pink paper is cut from Stripes resized to 8.5”x7”
Yellow pieces are cut from yellow paper resized to 8.5”x6”
Blue resize to 8.5″x5″
Dark pink resize 8.5″x3″
Print the 6”x6” grey square jpg file.
When printing, use the Best Quality setting on Plain Paper in your printer Preferences.

Print the sentiment on pink paper and cut around it using the piece for it in the SVG cutting file.

Impossible Butterfly Popup Card

Printed Sentiment

SVG files are provided All in one file or in three separate files for your convenience. However, if using the All in one file, you do not need to use the separate files.

Impossible Butterfly Popup Card

Cutting Pieces

Cut the File Pieces

First cut the file pieces with the black lines on 110# heavy cardstock using the chipboard setting. Next, score the red line without removing the mat from the machine. Do not move the cutting head. You may use a scoring tool, or cut the score line with a retracted blade and lower cutting pressure.

Impossible Butterfly CArd

Cut Card Base

Folding Card Base

After you finish cutting and scoring the card base, remove it from the cutting mat. Then fold the center portion of the card towards the front, and use a bone folder on the crease.

Impossible Butterfly Popup Card

Twist right side to back

Now, twist the right section of the card to the back, and press the side portions flat, allowing the center to pop up.

Impossible Butterfly Popup Card

Twist right side to back

Make Glitter Paper

See detailed instructions for making Glitter Paper in a previous post. In this project I used 1″ wide double stick tape instead of a sheet of scor-tape.
Use double sided sticky tape over the entire printed grey piece that you printed. To use it, first remove the backing. Next, adhere the sticky strips to cover the grey paper. Then Remove protective layer off the front of the tape.

Impossible Butterfly Popup Card

Cover the grey paper with double sided sticky tape strips.

Sprinkle the sticky tape with glitter. Next, brayer over the glitter. Now, rub the glitter with your finger. Finally, sprinkle off the excess glitter, and pour it back into the jar.

Impossible Butterfly Card

Glitter paper ready to cut.

Next you can cut the large and small grey butterfly pieces, as well as the sentiment mat from the glittered paper. Use your poker tool to remove small inside pieces that did not stick to the mat. See the resource document for information on cutter crafting tools in the Free Resource Library.

Impossible Butterfly Popup Card

Cut Butterflies

Assembly of the Impossible Butterfly Popup Card

Now, your cut pieces are ready to assemble.

Impossible Butterfly Popup Card

Cut pieces are ready to apply to the card.

Butterfly Assembly

Bend the butterfly wings forward. Glue only the center body part of the butterflies when assembling layers.
Next, glue body of the large lacy butterfly to the solid pink butterfly. Then glue the body of the pink butterfly to the striped mat. Finally, glue that mat to the blue mat, aligning the tops of the pieces to each other.

Impossible Butterfly Popup Card

Assemble the butterfly layers.

Now you can glue the butterfly layers to the card base, aligning the tops of the design. The edge of the bottom layer should line up with the score line.

Impossible Butterfly Popup Card

Glue the butterfly layers on the card.

Next, center yellow panels to the card base and glue in place.

Impossible Butterfly Popup Card

Add decorative panels.

Tag Assembly

The larger tag and mat for the back side of the card is for writing your personal greeting. First, glue the yellow journaling piece to its mat. Then center the tag on the back side of the card with the edge flush against the fold line to give support for the butterfly popup. Now, glue in place. Finally, to finish the back side of the card, glue the striped panel to the back side of the butterfly.

Impossible Butterfly Popup Card

Back side of the card.

Card Front Embellishments

Now you are ready to add the embellishments to the front of the card. First glue the long narrow rectangle to its mat. Center it on the front bottom part of card. Then glue in place.

Impossible Butterfly Popup Card

Front panel

Now, add pop dots to the back of the sentiment, and place on the grey mat. Then glue the assembled sentiment at an angle on the left front side of the card over the decorative strip.

Impossible Butterfly Popup Card

Add the Sentiment

Next, bend the wings of the small butterflies upward. Then glue the body of the smallest butterfly to the pink butterfly. Finally, glue the body of the pink butterfly to the bar on the front, over the open space.

Impossible Butterfly Popup Card

Small Butterfly Embellishment

Finished Impossible Butterfly Card

Now you can display your finished card.

Impossible Butterfly Popup Card

Finished Impossible Butterfly Popup Card

When it is folded flat, the card will fit in a 7″ square envelope for mailing.
The recipient of your card is sure to be encouraged by your lovely card.

Love,
Julie, cuttercrafter.com

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

- PAGE 1 OF 2 -

Next Page ⇀

loading
×

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below. If you already have your password, enter the resource library here. Forgot your password? I put the password at the bottom of nearly all of my emails. But if you can’t find one of my emails to you, you can either fill out the form above again or email me at hello@cuttercrafter.com Password Tip: I recommend you copy and paste the password in to avoid any accidental mistakes. If you ever forget your password, please email hello@cuttercrafter.com Not working? If you enter the password and the same page refreshes, without any contents, that means you put in the wrong password. Double-check your email, copy the password, and paste it in to the link above. Still not working? I promise the password works—I haven’t changed it since I opened the library.   Try the copy/paste method again and make sure the URL you are going to has https at the start of it (that’s a secure page and it makes a difference). If that still isn’t working, try a different web browser.
%d bloggers like this: