Jul 23., 2018   /   3D Project, Cricut, Cutter Software, Pazzles, Popup Cards, Scan N Cut, Silhouette Cameo3

Make an Oval Accordion Card

Make an oval accordion card.

You can make this oval accordion card using the FREE SVG cutting files posted in our Free Resource Library. Make it using as many or as few panels as you like. There are several layers which you can use for the center of each panel, or you can use the base oval for trimming a photo to fit. Add photos and/or sentiments, or  journaling  to the front and back side of each oval as you prefer. The card’s height is 6″, but you may adjust the size according to your needs. You may even add lots of panels to create a mini album. The card folds flat for mailing, with a complete size of 4.5″ x 6″ . It stands alone for display.

Supplies Needed to Make the Oval Accordion Card

Please note: Some affiliate links may be used in this post. I am affiliated only with products that I use. When you purchase products using my affiliate links, it does not cost you any more, but I will share some commission. Thanks!

Software Requirements

The SVG files are suitable for use with Make The Cut, Sure Cuts A Lot, Pazzles InVue software, Cricut Design Space, Brother Canvas Workspace,  Scan N Cut,  Inkscape,  Silhouette Studio DE, Illustrator, CorelDraw, and any other software that will import SVG files. Also included is a PDF file containing assembly instructions.

Paper Choices

Decide how many panels you want for your card. Then select papers for any layers that you wish to use. Print any digital paper you plan to use for the rectangular frame on each panel. You can use printed papers, or solid. If you are using photos,  trim them to the size of the largest oval in the file, or to any size that you prefer. There are several layers to choose from. You can use some of the panels for titles, sentiments or journaling. Select heavy cardstock for the base panels, as they will stand alone better, and be more sturdy for displaying. Use lighter weight cardstock for the oval layers. You do not want these to be too heavy to put unnecessary weight on the upper and lower hinges on the ovals. You may use pop dots to give more dimension to any of the layers.

Cutting Instructions

The cutting files include a single panel for the left side of the base card. The left and center panels are the same. Make multiples of the center shapes for as many extra panels that you need. The panel for the end of the right side of the card is different from the others, as it has no folding tab for the right side of the card. You need only one of these panels. This panel is rotated in the cutting file so that it will fit  better on the cardstock for cutting. You will need an extra printed layer for the front of the card, if you plan to close it flat. Also consider cutting extra oval layers if you plan to use the back sides of the ovals.

Score Lines

The score lines for the side tabs are better created as shallow solid lines, as opposed to cut dashed lines. You can use a scoring tool, embossing tool, engraving tool, or the blade set to a low extension, and cut at a low cutting pressure. You do not want the blade to cut through, but rather to just scratch the surface so that the tabs fold more readily.

Basic panels for oval Accordion Card

Oval Accordion Card Assembly

It is easiest to decorate the base card pieces before folding. Use glue around the edges of the back side of each layer. Next glue the layers onto the base card. Make sure the rectanglular layer does not overlap the score lines.

Decorated Panels

After you have decorated the panels, fold the flaps. The panel on the left has the flap folded up with a valley fold. The center panel has the flap folded back with a mountain fold. If you have more panels, the folds will alternate. The panel on the right does not have a flap. Next glue the left edge of the center panel over the flap of the panel to its left. If you have additional panels, repeat this process. Glue the final panel over the flap of the panel to its left.

Panels Glued Together

Folding the Card

Use a bone folder to crease the panels in the direction of their folds. Between the first two panels there is a valley fold. Between the last two panels there is a mountain fold. Now, place glue on the tiny square tabs between the ovals and the outer frame. The oval on the left comes over the valley fold to meet the the oval to its right. Glue the tab to the back of the neighboring oval, and fold the tab with a mountain fold. The tab on the center oval goes behind the mountain fold of the base card to connect to the back side of the oval to its right. Make a valley fold on this tab. The ovals should end up touching each other. Hold the tabs in place until the glue dries.

Glue oval tab to neighboring oval.

Fold the ovals in the opposite direction of the folds in the base card. Then burnish creases.

Connecting Oval Tabs

Fold the card flat. The tabs at the top and bottom of each panel should fold naturally as you help the base card and ovals fold correctly.

Card Folded Flat

Burnish the folds so that they are creased well. Now you may decorate your card with additional embellishments if you would like to do so. I might add a 3D flower from my collection, depending on who I plan to give it to.

Oval Accordion Card completed

Love,
Julie, cuttercrafter.com

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.