You can make an Easy DIY Tool Organizer to keep your most used tools for cutter crafting handy on your desk next to your cutter. This is a great first project to try after you have set up your cutter and finished performing some test cuts.
You will find the cutting files for this project in the Free Resource Library. There is also a special file in the Free Resource Library with a list of Five Must-Have Cutter Crafting Tools which you likely have around your home already. This Easy DIY Tool Organizer will provide a place to keep these important tools so that they don’t get lost, and they remain handy while you cut and craft!
Supplies Needed to Make the Easy DIY Tool Organizer
Two sheets of heavy 12″x12″ cardstock
Glue that dries quickly.
Cutting File from the Free Resource Library
Five Must-Have Cutter Crafting Tools
Assembly Instructions for the Easy DIY Tool Organizer
To make this Easy DIY Tool Organizer, use the heaviest cardstock that you have that your cutter can cut. Be sure to do a test cut to determine the best pressure and blade extension for the cardstock that you have chosen. Since the cardstock is heavy, it is important that you use a brayer or other similar implement to press the cardstock firmly on the cutting mat. Heavy pressures can cause the paper to move around the cutting mat during cutting if the cutting mat is not sticky enough.
Cutting the Easy DIY Tool Organizer
Download the zipped cutting file from the Free Resource Library and Extract All. Open your cutting software and import the appropriate file. Most cutter software can use the SVG file, but there are other formats included for those who need them. Follow the instructions for using SVG files with your cutter. If you are using Cricut Design Space, see How to Use SVG Files in Cricut Design Space. If you are using Scan N Cut, open the FCM files. There are two files for Scan n Cut users. See also How to Use SVG Files with Scan N Cut. Open the MTC file to cut the design from Make The Cut. Or see this video tutorial on how to find and use SVG files with Make The Cut. Open the PVGC file to use with Pazzles InVue software. If you are using a Silhouette or Cameo machine, open the Studio2 file. If you are using Sure Cuts A Lot, open the SCAL4 file.
Once you have the file open in your software, send it to cut. There are two design sections, represented by two different line and fill colors. Select one portion of the design and cut. Remove the cut pieces for that cut. This piece may require a 24″ long mat. However, if you place your 12″x12″ paper strategically on your cutting mat, you may get it all to cut on the standard cutting mat.
Now you are ready to cut the pieces for the second part of the Easy DIY Tool Organizer.
Fold and Glue First Box
Fold on all of the score lines using mountain folds, folding towards the back of the pieces, for the first part of the Easy DIY Tool Organizer.
Put glue on the outside of each of the glue tabs for the main box. Fold up the side pieces, and hold the tabs in place until the glue is dry to form a box.
Add glue to the outsides of the tabs on the dividers, and place inside of the box, about 3/4″ from the ends of the box, or wherever you wish to place them to fit your tools.
Fold and Glue Second Box
Fold on all of the score lines using mountain folds, folding towards the back of the main box piece. The long narrow strip has folds that alternate between mountain and valley folds, as shown in this photo. From left to right the folds are as follows: valley, mountain, mountain, valley, valley, mountain. The partitions on the left side of this box are larger than those on the right.
Glue the tabs on the main box piece to the end pieces. Hold in position until the glue is dry, forming a box.
For the inside partition piece of this box, place glue on the two flat sections where they will line up against the front and back of the box. The small tabs need glue as well, where they attach to the main box. Make sure you have the narrower compartments on the right side. Place the right side into the box, lining up the tab with the front right corner of the box. Make sure the the sides of the compartments are straight. Then hold in position until the glue is dry.
Assemble the Easy DIY Tool Organizer
You may use the two boxes separately, one on either side of your cutter. I like to use strong double stick tape to adhere the boxes securely to the cutter end caps.
But my current setup makes it easier to access my important cutting tools by having them both on one side of my cutter. To make the two boxes into a single unit, glue the back of the smaller box to the front of the taller box. Be sure to line up the bottoms of both boxes against your desktop.
Now you can fill your Easy DIY Tool Organizer with the tools you use the most in your crafting. Be sure to see the special file in the Free Resource Library with a list of Five Must-Have Cutter Crafting Tools which you likely have around your home already. This Easy DIY Tool Organizer will help you to organize those Must-Have cutter crafting tools.
Decorate Your Easy DIY Tool Organizer
I used one of the large peony flowers that I made for my Lovely Peony Basket. You can decorate yours with any number of beautiful ornaments from your supplies.
Here is my finished Easy DIY Tool Organizer. I would love to see yours! What are you going to put in it?
Would you like to see some more of my FREE SVG projects? Check them out in my FREE Resource Library.
>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<
If you already have your password, enter the resource library here.