decoration decoration decoration
decoration
leaf leaf leaf leaf leaf
decoration decoration

Easy DIY Tool Organizer

You can make an Easy DIY Tool Organizer to keep your most used tools for cutter crafting handy on your desk next to your cutter. This is a great first project to try after you have set up your cutter  and  finished performing some test cuts.

Easy-DIY-Tool-Organizer

Easy-DIY-Tool-Organizer

You will find the cutting files for this project in the Free Resource Library. There is also a special file in the Free Resource Library with a list of Five Must-Have Cutter Crafting Tools  which you likely have around your home already. This Easy DIY Tool Organizer will provide a place to keep these important tools so that they don’t get lost, and they remain handy while you cut and craft!

Supplies Needed to Make the Easy DIY Tool Organizer

Two sheets of heavy 12″x12″ cardstock
Glue that dries quickly.
Cutting File from the Free Resource Library
Five Must-Have Cutter Crafting Tools 

Assembly Instructions for the Easy DIY Tool Organizer

To make this Easy DIY Tool Organizer, use the heaviest cardstock that you have that your cutter can cut. Be sure to do a test cut to determine the best pressure and blade extension for the cardstock that you have chosen. Since the cardstock is heavy, it is important that you use a brayer or other similar implement to press the cardstock firmly on the cutting mat. Heavy pressures can cause the paper to move around the cutting mat during cutting if the cutting mat is not sticky enough.

 

Easy-DIY-Tool-Organizer2-cuttercrafter

Adhere cardstock firmly to the cutting mat.

Cutting the Easy DIY Tool Organizer

Download the zipped cutting file from the Free Resource Library and Extract All. Open your cutting software and import the appropriate file. Most cutter software can use the SVG file, but there are other formats included for those who need them. Follow the instructions for using SVG files with your cutter. If you are using Cricut Design Space, see How to Use SVG Files in Cricut Design Space. If you are using Scan N Cut, open the FCM files. There are two files for Scan n Cut users. See also How to Use SVG Files with Scan N Cut. Open the MTC file to cut the design from Make The Cut. Or see this video tutorial on how to find and use SVG files with Make The Cut. Open the PVGC file to use with Pazzles InVue software. If you are using a Silhouette or Cameo machine, open the Studio2 file. If you are using Sure Cuts A Lot, open the SCAL4 file.

Once you have the file open in your software, send it to cut. There are two design sections, represented by two different line and fill colors. Select one portion of the design and cut. Remove the cut pieces for that cut. This piece may require a 24″ long mat. However, if you place your 12″x12″ paper strategically on your cutting mat, you may get it all to cut on the standard cutting mat.

Easy-DIY-Tool-Organizer3-cuttercrafter

Cutting file part 1 pieces.

Now you are ready to cut the pieces for the second part of the Easy DIY Tool Organizer.

Easy-DIY-Tool-Organizer4-cuttercrafter

Second part of the box.

Fold and Glue First Box

Fold on all of the score lines using mountain folds, folding towards the back of the pieces, for the first part of the Easy DIY Tool Organizer.

Easy-DIY-Tool-Organizer5-cuttercrafter

Fold towards the back on all score lines on this piece.

Put glue on the outside of each of the glue tabs for the main box. Fold up the side pieces, and hold the tabs in place until the glue is dry to form a box.

Easy-DIY-Tool-Organizer9-cuttercrafter

Glue the tabs to the end pieces of the box

Add glue to the outsides of the tabs on the dividers, and place inside of the box, about 3/4″ from the ends of the box, or wherever you wish to place them to fit your tools.

Easy-DIY-Tool-Organizer10-cuttercrafter

Glue the dividers inside of the box.

Fold and Glue Second Box

Fold on all of the score lines using mountain folds, folding towards the back of the main box piece. The long narrow strip has folds that alternate between mountain and valley folds, as shown in this photo. From left to right the folds are as follows: valley, mountain, mountain, valley, valley, mountain. The partitions on the left side of this box are larger than those on the right.

Easy-DIY-Tool-Organizer6-cuttercrafter

Fold tabs for Box 2 as shown.

Glue the tabs on the main box piece to the end pieces. Hold in position until the glue is dry, forming a box.

Easy-DIY-Tool-Organizer7-cuttercrafter

Glue the second box together.

For the inside partition piece of this box, place glue on the two flat sections where they will line up against the front and back of the box. The small tabs need glue as well, where they attach to the main box. Make sure you have the narrower compartments on the right side. Place the right side into the box, lining up the tab with the front right corner of the box. Make sure the the sides of the compartments are straight. Then hold in position until the glue is dry.

Easy-DIY-Tool-Organizer8-cuttercrafter

Partitions inside of the second box.

Assemble the Easy DIY Tool Organizer

You may use the two boxes separately, one on either side of your cutter. I like to use strong double stick tape to adhere the boxes securely to the cutter end caps.

Easy-DIY-Tool-Organizer11-cuttercrafter

Use a box on either end of your cutter if you like.

But my current setup makes it easier to access my important cutting tools by having them both on one side of  my cutter. To make the two boxes into a single unit, glue the back of the smaller box to the front of the taller box. Be sure to line up the bottoms of both boxes against your desktop.

Easy-DIY-Tool-Organizer12-cuttercrafter

Glue the two boxes together to make a single Easy DIY Tool Organizer

Now you can fill your Easy DIY Tool Organizer with the tools you use the most in your crafting. Be sure to see the special file in the Free Resource Library with a list of Five Must-Have Cutter Crafting Tools  which you likely have around your home already. This Easy DIY Tool Organizer will help you to organize those Must-Have cutter crafting tools.

Easy-DIY-Tool-Organizer13-cuttercrafter

Place your most used tools in the Easy DIY Tool Organizer

Decorate Your Easy DIY Tool Organizer

I used one of the large peony flowers that I made for my Lovely Peony Basket. You can decorate yours with any number of beautiful ornaments from your supplies.

Easy-DIY-Tool-Organizer16-cuttercrafter

My Easy DIY Tool Organizer on my desk.

Completed Project

Here is my finished Easy DIY Tool Organizer. I would love to see yours! What are you going to put in it?

Julie, cuttercrafter.com

Would you like to see some more of my FREE SVG projects? Check them out in my FREE Resource Library.

 

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

How to Make a Lovely Peony Gift Basket

Learn how to make a lovely peony gift basket adorned with six 3-D peony flowers. Use your craft cutter – Cricut, Pazzles, Scan N Cut, KNK, Silhouette, Silver Bullet, etc.- to cut out all the pieces for the project. The basket is easy to assemble. Color and shape the flowers, glue to the basket, and fill with goodies to make it ready to give to someone special for Mother’s Day, Anniversary,  Birthday, Graduation or other special occasion.

You can make Peony Gift Basket with 3D flowers

Peony Gift Basket with 3D Flowers

There are two small  and one medium-sized peonies on each side of the handle. The basket is made from white cardstock, and it is lined with pieces cut from printed digital papers available in the Pazzles Craft Room. I plan to fill this basket with my mother’s favorite Sees candy, and give it to her for Mother’s Day. You can fill yours with special treats for someone special in your life for a special occasion such as a birthday, wedding, baby shower, anniversary, graduation, Mother’s Day, etc. There is a matching card available in the Pazzles Craft Room, the Popup Flower Card.

Assembly Instructions:

Make six 3D peony paper flowers, 4 small and two medium. The SVG, WPC, or AI cutting files include flowers in three different sizes. I used the small and medium flowers on my basket. I am placing the larger flowers that I made inside of the basket with the treats that I use to fill the basket.

Cut two medium petal layers, and two smaller petal layers, and one set of leaves per flower.

Add water color to the lower half of each petal. I used water color pencils to scribble some lines on the lower portion of each petal, then swirled a water brush pen around each petal to blend the color. You can use inexpensive watercolor paints and small paintbrush dipped in water to blend the colors.

How to Make a Lovely Peony Gift Basket

Watercolored Flowers

Shape the Petals

Place small petals, color side down, on the slots for the small size petals of the Heartfelt Creations Basics flower mold. Place the larger petals color side up on the slots for the medium size petals. You may layer up to three of the petal layers per slot in the mold.

How to Make a Lovely Peony Gift Basket

Flower Mold

Place the cover over the petal-filled base, and run through your Cuttlebug, Big Shot, or other embossing machine using a cutting plate sandwich that works with your machine according to the chart available at Heartfelt Creations. I used the Fiskars Fuse machine with 2 -B and 1- C adapter plates along with the cutting plate.

How to Make a Lovely Peony Gift Basket

Use an embossing machine with the flower shaping mold.

Remove the petals from the mold and let them dry.

How to Make a Lovely Peony Gift Basket

Let the Shaped Petals Dry

Place the dry petals on an embossing mat, medium size petals color side up, and small size petals color side down. Press firmly in the center of each petal layer using an embossing tool to lift the petals. I used the 5mm tip in a small circular motion in the center of each petal layer to add more lift as needed.

How to Make a Lovely Peony Gift Basket

Use flower shaping tools

Assemble the Flowers

Place some hot glue in the center of the uncolored side of one of the small petal layers, and place a small faceted bead in the glue. Add some more hot glue to two of the petals and squeeze them around the bead. Add hot glue to just the bases of the remaining petals, and wrap them around the bead. Place some hot glue in the center of the other small petal layer and position the bud in the center. Squeeze the petals of this layer around the bud.

How to Make a Lovely Peony Gift Basket

Flower Bud

Shape the larger petals in the same manner. Place some hot glue in the center of one of the petal layers and place the second petal layer in the center, with petals alternate of those in the first layer. Place glue on the bottom and around the bottom edge of the bud, and place in center of the larger layered petals.

How to Make a Lovely Peony Gift Basket

Completed Peony

Shape the leaves using the paint brush handle, and make a valley fold down the center of the leaves.

How to Make a Lovely Peony Gift Basket

Shaped Leaves

Place some glue in the center of the leaves and place the flower in the center of the leaves.

How to Make a Lovely Peony Gift Basket

Peony with Leaves

Make the Basket

Cut the white pieces for the basket from heavy cardstock. The basket is formed using three sections that are glued together by the side tabs. The cutting file includes panels (shown in pink below) that will be cut from patterned paper and glued inside of the basket after it is assembled. Be sure to do a test cut on your paper before cutting the delicate basket design.

How to Make a Lovely Peony Gift Basket

Basket Pieces to Cut

Print the digital paper, or use printed paper that you have, and cut the inside pieces, show in pink above. Glue the pink pieces to the white pieces before assembly. The square pieces go on the back side of the white pieces. Fold the top flaps forward on the score lines, and glue the pink scalloped pieces under the folder flaps as shown below.

How to Make a Lovely Peony Gift Basket

Pattern Paper glued to inside pieces of basket.

Glue the front side of a side tab to the back of the untabbed side of another basket section. Repeat with the remaining basket piece.

Shape the pieces into a hexagon shape, and glue the final tab to the remaining open side.

Turn the box upside down, and fold the flaps towards the center of the basket.

Place glue around the edges and around the inside of one of the hexagon pieces as shown below in blue.

Press the prepared hexagon, glue side down into the bottom of the basket.

Glue the other hexagon to the bottom of the box, covering the tabs.

Gently stretch the handle pieces with your fingers into curved shapes.

Glue the printed strip in the center of the handle piece. If your patterned paper was not a full 12 inches long, center it on the handle piece. The bottom inch on each end of the handle will not be visible once glued to the inside of the basket.

Use hot glue to attach each end of the handle inside the basket. The ends of the handles should go about one inch down from the top edge of the basket.

Use hot glue on the back of each flower to attach to the basket. Glue the larger flowers on center of the outside flap opposite the handles. Then glue the smaller flowers on the flaps, on either side of the larger flower.

How to Make a Lovely Peony Gift Basket

Finished Peony Basket

How to Make a Lovely Peony Gift Basket

Side view of the Peony Gift Basket

Fill the basket with the recipient’s favorite treat, and delivery to someone special. They are sure to love it!

Would you like to have the FREE SVG cutting file for a smaller version of the same 3D flower that was used in this project, as well as some of my FREE SVG projects? Check them out in my FREE Resource Library.

 

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

Make a Special Cupcake Gift Box

My latest Pazzles Design Team project post will help you to make a special floral cupcake gift box for someone special. The 3D lilacs on top of the box add a special touch for your female recipients. Do you need a gift for a special graduate, or for birthday celebration? This project is easy to make with the cutting files posted with it  here:   https://www.pazzles.net/wordpress/2018/04/18/beautiful-cupcake-box
This cupcake gift box  could work as a Mother’s Day, Father’s Day,   Anniversary, or gift for other special occasions. You can make this box with or without the acetate window on the front. You may use the 3D lilac flowers on top, or leave them off.

Cupcake box without 3D Lilacs

The handles on top make it easy to carry the box, and the tray inside of the box has a tab to help you pull the cupcake out of the box.

You may leave the box plain for masculine recipients. They will be surprised by its contents when they open the box. The  cupcake is not likely going to last long!

Would you like to have some FREE SVG cutting files for a variety of projects?

Get the password for the Free Library with free SVG files  by filling out this form:

 

 

 

loading
×

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below. If you already have your password, enter the resource library here. Forgot your password? I put the password at the bottom of nearly all of my emails. But if you can’t find one of my emails to you, you can either fill out the form above again or email me at hello@cuttercrafter.com Password Tip: I recommend you copy and paste the password in to avoid any accidental mistakes. If you ever forget your password, please email hello@cuttercrafter.com Not working? If you enter the password and the same page refreshes, without any contents, that means you put in the wrong password. Double-check your email, copy the password, and paste it in to the link above. Still not working? I promise the password works—I haven’t changed it since I opened the library.   Try the copy/paste method again and make sure the URL you are going to has https at the start of it (that’s a secure page and it makes a difference). If that still isn’t working, try a different web browser.