Tips for Cutting Basswood on the Cricut Maker
Here are my tips to cut basswood on the Cricut Maker while making a lovely 3D Family Tree bursting with small magnolia flowers!
Supplies Needed to Make the 3D Family Tree
Please note: Some affiliate links may be used in this post. I am affiliated only with products that I use. When you purchase products using my affiliate links, it does not cost you any more, but I will share some commission. Thanks!
One Basswood sheet 3/32″ x 8″ x 24″
Knife Blade holder and blade for Cricut Maker
Cricut Strong Grip Mat
Blue painters tape or masking tape
3D Family Tree design by JenniferMaker.
Glue that dries quickly.
Heartfelt Creations 3D Rose Shaping mold
Magnolia Flower Cutting File from the Free Resource Library
Cricut Printable Sticker Paper
Cricut recommends using basswood no thicker than 1/6″, but all I had was 3/32″ basswood. I used it to cut a lovely free 3D Family Tree design by JenniferMaker.
Preparation for Using the Knife Blade to Cut Basswood
First, If you have the Cricut Maker, order the Knife blade, and an extra blade. Basswood was hard for me to find locally. You may have to order some online. The other thing that would be good to order is the 2mm chipboard for the Maker. I noticed that this is an excellent quality chipboard. Not all chipboard is created equally. Some shreds easier than others, and cuts poorly. This chipboard is thick, firm, and a good cutting quality. It measures only 11″x11″ . Thicker media for cutting with the knife blade needs to be no wider than 11″.
After you receive your new knife blade, be sure to follow the instructions for its proper use. You need to calibrate the knife blade in the Cricut Maker machine. This process is easy and quick. Then, move the white star wheels on the roller bar over to the right. I neglected to do this, and the wheels marked up the length of my wood. Do some small test cuts! See my post on how to make test cuts.
Cuts using the knife blade need to be no smaller than 3/4″, or about the width of a pencil. A few pieces of my 3D tree broke after removing them from the mat because they were on the thin side. Basswood is more sturdy than balsa wood, but it can split if you are not very careful handling it while removing it from the mat.
Use the heavy tack mat, and use painter’s tape or masking tape on the edges to keep the wood in place during cutting.
Cut Basswood with the Knife Blade
Heavy media takes many passes, and may take a very long time. Thick basswood required about 14-15 passes. The 3D tree took two hours to cut. There were two large pieces to cut, and each piece took an hour. Stay near the machine during the cut, as the blade did get stuck about 4 times on each of the pieces. When the blade runs into tiny pieces of “dust”, cutting stops, allowing you to brush away the debris. You click on the C button to resume the cut at this point. No time is lost, and the machine does not miss any steps in the process. Since I was cutting media that was thicker than what was recommended, that may have been part of the reason for the blade getting stuck so much. But the cuts were still perfect!
You do have the option to add extra passes, one at a time, after the cutting is done, in case the wood is not cut all the way through. You simply press on the C button on the machine to have it cut again. Do not do this too many times, as the knife is capable of cutting all the way through the mat.
To remove the cut pieces from the mat, remove the tape first. Then roll the mat away from the wood. You don’t want to bend the wood, because it can crack and split.
Assemble the 3D Basswood Tree
You cut two pieces. One of them has a slit at the top, and the other has a slit at the bottom. Handling very carefully, slide the piece with the slit in the bottom as far as it will go over the other piece that has the slit at the top. The pieces will fit together very snugly if you are using Basswood with 3/32″ thickness. The cut pieces are fragile. The tree will stand on its own if the two pieces are aligned correctly.
Cleaning the Mat
Using a scraper tool on the mat after cutting wood is not a good idea. The bits of wood can get caught in the grooves of the cuts in the mat, ruining it. It is recommended that you wash the mat and use a brush with a circular motion to get the tiny wood pieces off of the mat. Then you can let the mat dry, or wipe it down with a soft cloth or paper towel. My mat cleaned up nicely. The knife blade did produce some pretty deep cuts on the mat, though.
Decorate Your Cut Basswood Tree
You may decorate your cut basswood tree according to your plan for its use. I decided to make my tree into a 3D Family tree, with names of family members printed on sticker paper, cut into heart shapes. To do this, you can print the names on Cricut Printable Sticker Paper, and use your electronic cutter to cut around the printed names in the shape of hearts. Be careful not to cut through the backing sheet of the sticker paper. Performing a test cut on the sticker paper before proceeding is important.
Next, adhere the heart stickers to the assembled tree. There are 72 small hearts onto which you may place stickers. Add small magnolia flowers on the tree branches. This is a smaller version of the flower used on the lovely peony gift basket. Assembly of the small magnolia flowers is very similar to the peony flowers on the gift basket.
Instead of shaping the small flowers as a peonies with small beads in the centers, shape them as more open Magnolia flowers. To do this, Instead of using the 3D Floral Basics Shaping Mold from Heartfelt Creations, use their 3D Rose Shaping Mold. Use two petal layers and one leaf layer for each flower you wish to place on the tree. I used 32 flowers on my 3D tree, so I needed 72 petal layers. Use quick drying glue inside of one of the petals, and insert the other with petals alternating. Shape the leaf layer, add some glue to the center, and place the petal layers in the center of the leaf layer. Adhere the flowers to the tree branches so that they do not obscure any of the printing on the heart stickers, using a dot of hot glue on the back of each flower.
You can use this lovely 3D Family Tree design as a nice table centerpiece, or decor for a special event. It can be a part of a 3D village, or it can be a special gift. For weddings you could have each guest sign a blank heart sticker, then you can place the stickers on the tree later. This idea would also work for baby showers or wedding showers. Another idea is to use this as a necklace organizer. Use colors and decorations to match the theme of your special event!
Get the FREE CUT FILES FOR THE Small Magnolia Flower
You can get the SVG cut files for the Small Magnolia Flower as well as some of my other FREE SVG projects from my FREE Resource Library.
>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<
This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.
If you already have your password, enter the resource library here.