Why You Might Need a Brother Scan N Cut
Brother Scan N Cut
Unique Features of the Scan N Cut
Here are some reasons why you might need a Scan N Cut electronic cutter. It has a built in wide format scanner. The scanner allows it to cut around stamped or printed images. No computer or Internet connection is necessary. Scraps can be used efficiently. It can fill fonts with solid or patterned fills to be drawn or embossed. Free design software is available for download to your computer. You can use your SVG file collection with this machine.
Wide Format Scanner Built into the Scan N Cut
Do you need a wide format scanner? If you do, then the Brother Scan N Cut 2 might be for you. With it you can scan a full 12″x12″ image, save to a USB thumb drive in JPG format in up to 300 DPI resolution. Wide format scanners can be extremely expensive. This wide format scanning feature alone makes the purchase of a Brother Scan N Cut a worthy investment. The built in scanner in the Brother Scan N Cut machine allows you to scan a design into the machine, and then have the machine cut around the printed design. The machine knows exactly where your images are on the mat to create a perfect cut. This is a great option for scrapbookers who create layouts in up to 12″x 12″ size, as they can scan their completed pages and share them with others online or even have copies printed.
Cutting Scraps with the Background Scans
The background scanning feature is genius. You can put your different colored scraps down on the mat. Then do a background scan . Finally, place your cutting designs exactly where you want them to cut. There is no guessing about where the shapes will be cut. You can make use of even the tiniest of scraps without worrying about where to place the designs on the screen.
Cut Around Stamped or Printed Images
You can stamp an image with a rubber stamp, scan it into your Brother Scan N Cut, and the machine will cut around the stamped image. No additional software is necessary. This is a great option if you want to select the Direct Cut method on the machine to cut around the outside of the stamped shape. Quick and easy. You will need to play a bit more to master the machine’s more advanced Scan to Date option.
No Computer or Internet Necessary for Using the Scan N Cut
The Brother Scan N Cut can operate fully independent of a computer. There is with no need of expensive cartridges. With the addition of the optional wireless card, you can connect from the free Canvas software on your computer to your Brother Scan N Cut. This machine is an excellent option for those who do not have ready access to high speed Internet service. It can be operated without a computer, and without Internet service.
There are hundreds of cutting designs built in to the machine, ready to edit and cut. There are also hundreds of free cutting projects posted online at the Brother site that can be saved to a thumb drive. Then you can cut them on this machine. My grandchildren preferred this machine over all the others in my studio. I worked on my computer and cut to my Pazzles or Cricut Maker, and they were very content to cut their projects on my Scan N Cut without help. By the way, they are ages 11, 9, and 7.
Free Design Software
Canvas Workspace
The Brother Scan N Cut can use SVG files created in the free Canvas Workspace software, or any other software that provides an SVG file export. SVG files can be opened in the Canvas Workspace software and saved in FCM format, or it can be sent directly to the Brother Scan N Cut machine to cut, via the wireless connection. Or you can save your SVG and FCM cutting files on a USB thumb drive, and plug it directly into the machine’s USB port. The built in software allows you to load the design, edit it to the perfect size, and cut the design.
Drawing with Pens and Fills
Another unique feature of the Brother Scan N Cut is the option to draw text or a shape with a pen or embossing tool and fill it automatically with a solid fill or design. This can be done with software on other cutters, but this feature is actually built in to the Brother Scan N Cut machine.
SVG File Compatibility
The Brother Scan N Cut is compatible with third party software. Vector art programs such as Illustrator, CorelDraw, Inkscape, Sure Cuts A Lot, Make The Cut, Pazzles InVue, Silhouette Studio, Funtime Scrapbooking, and others that can be used to create SVG files that can be cut on this machine.
Amazing Cutting Pressure for Heavy Media
In addition to its unique features, the Brother Scan N Cut boasts cutting specifications that rival top-of-the-line cutters in the home crafting market place. At the same time, its price is comparable to entry level cutters. Its 1250 grams of cutting pressure is exceeded only by a couple of other more expensive cutters in the home crafting cutter marketplace. With this pressure, it can cut through most any media up to 1.5mm in thickness.
Hints to Get Started with the Scan N Cut
Protect your Mat
Since the Scan N Cut is a heavy duty cutter, it can cut straight through your cutting mat. The mats are expensive. So spare yourself some agony and expense by setting your cutting pressure to -1, and don’t change it. Change the blade depth instead.
After you order
Check this document while you wait for your machine to arrive. Find a home for it.
Go to the Brother site. Download all of the documents pertinent to the Scan N Cut. There is one chart in the manual that I referred to constantly. It includes suggested blade settings for a variety of different media. I printed a copy of it and attached it to my machine for quick reference.
Browse through the hundreds of free cutting projects at the Canvas Workspace site. Download the ones you like. There are new free projects posted there regularly.
Once your machine arrives, do some test cuts.
Go for it!
If you need a wide format scanner, an electronic cutter that does not require the use of a computer or the Internet, or a powerful craft cutting machine at an affordable price, the Brother Scan N Cut may be for you! Once you get your Scan N Cut, be sure to try cutting some of the projects included in our Free Resource Library.
Would you like to have some FREE SVG cutting files for a variety of projects?
Check them out in my FREE Resource Library.
>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<
This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.
If you already have your password, enter the resource library here.
Thanks!
Julie, cuttercrafter.com
How to Use SVG Files with Scan N Cut
Learning how to use SVG files with Scan N Cut is important. Not all SVG files work well with Scan N Cut. In this tutorial you will learn how to make sure that your SVG file will work well with your Scan N Cut. ScanNCut SVG files need to be no larger than 11.75″ x 11.75″ using the standard sized mat, or 11.75″ x 23.75″ using the long mat. The DPI size also needs to be correct. Make sure that the ScanNCut SVG file has a minimum number of nodes. This tutorial will address all of these issues.
Scan N Cut
How was the SVG file Created?
SVG files may be created in any number of software programs. Some software allows the designer to add many different “pages” of file pieces on a single screen. This is fine if cutting from that software directly to a supported cutter. That software will allow you to select the specific portions of the designs to be cut in a given pass. SVG files of this type will work in many programs for many different cutters. However, any SVG file imported into the Brother Canvas Workspace software will be resized to fit the mat on the screen. When all pieces of the file are selected, and the width or length of the selection is greater than the screen mat size, the pieces will be resized to fit. So all of your design pieces may shrink to a very tiny size in the Brother Canvas Workspace or on the LED screen of your Scan N Cut.
FREE Rose SVG Cutting File
There is a Free Large 3D Rose cutting file in SVG format in my Free Resource Library for you to use as you work through this tutorial. When it is cut and assembled, this rose has a width of about 7″.
Large 3D Rose SVG Project
The cutting pieces for this project measure over 17.5″ wide when selected in their original size. The largest petals measure 3.45″ wide.
Original Size of Large Rose Cutting File – 17.5″ wide
But when you import this same design into Brother Canvas Workspace, you will receive a message that the design was resized to fit the Canvas Workspace.
Warning Message in Brother Canvas Workspace about Size
The resulting imported design in Brother Canvas Workspace was resized to be 11.75″ x 11.75″ and the largest petal measured 2.03″ wide. This size is about 58% smaller than the original. The final assembled flower would measure about 4.12″ wide. Now if this adjusted size is OK with you, then you can go ahead and cut the project to make the smaller rose.
Large Rose SVG file was resized in Canvas Workspace
Vendor Remedies for ScanNCut SVG Files
Some software vendors are aware of this issue, and save their larger SVG projects into multiple SVG files with a maximum width so that they will work with all software, including Scan N Cut. They will add all of the project SVG files to a single folder, and zip them up for a single download. You will need to unzip the folder once you have saved it to your computer, by clicking on the zipped folder, and selecting Extract All. Then you will be able to import one SVG file at a time to either Canvas Workspace or directly to your Scan N Cut via the Bluetooth connection, or via a thumb drive plugged in to the USB port on the machine.
How to Make Size Adjustments for ScanNCut SVG Files
If you have determined that you need to retain the sizing of the original file, how do you make the necessary size adjustments in the file so that it will work with the Scan N Cut? One option is to contact the original designer of the file, and ask them to limit the sizing of their SVG files to a width of 11.75″. However, that is not always practical for you or for the original designer. You can learn to make the necessary adjustments in the file so that it will work on your machine.
The best option is for you to use a third party software for making changes in your SVG file. Software that exports designs with the sizing of the original design are the free Inkscape , Make The Cut, or Sure Cuts A Lot (using the 96 DPI export option or Save as FCM). SCAL is the best option for MAC users.
The Large 3D Rose file is a good place for you to start. Select one of the above software programs to use for editing your SVG files. Plan to stick with it for all of your editing needs. You will need to learn how to use it for many different purposes. Each has its own learning curve. See my video tutorial covering use of each of these three programs for making the small changes that this file needs.
How to Reduce the Number of Nodes for a ScanNCut SVG File
Whenever you change file formats for a cutting file, it is possible that extra nodes will be added to the design. If a design has too many nodes, or construction points, it may not load into Canvas Workspace or the Scan N Cut. It is therefore important to reduce the number of nodes in the design before exporting as SVG. In Make the Cut, you can use Ctrl+Shift + X to view path detail.
Reducing the Node Count in Make The Cut
View Path Detail in Make The Cut
In this file there are only a total of 434 points, and 182 Nodes, as indicated on the top line of the window. This number of nodes is not a problem for Scan N Cut. Some files with lots of tiny detail can have upwards of 30,000 nodes. That would be too many. To reduce the number of nodes in Make The Cut, select all (Ctrl+A), Join (Ctrl+J), Auto Simplify Paths (Ctrl+Shift+Z). The number of nodes will be significantly lower if there are too many nodes.
Reduce the Node Count in Inkscape
If you are using Inkscape, and your SVG file has too many nodes, select all (Ctrl+A) and Simplify (Ctrl+L) as many times as needed to get rid of excess nodes, a few at a time. This file does not need it. You only need to reduce nodes or simplify paths if you get an error when trying to load your SVG file into Canvas Workspace or into the Scan N Cut machine.
Warning when attempting to transfer a design with too many nodes to Scan N Cut.
Reduce the Node Count Using Sure Cuts A Lot
To reduce the number of nodes in a file if you are using Sure Cuts A Lot, go to the Path menu at the top of the screen, and select Simplify. A window will open allowing you to see the nodes and reduce the number of nodes if there are too many. This design does not have too many nodes, so simplifying would actually add nodes as shown in the image below.
Use the Path Simplify tool to view the number and to reduce them if necessary.
Import your ScanNCut SVG Files into Scan N Cut Canvas Workspace or into the Machine
Once you have edited the SVG files to have its objects fit on a single design page in the software of your choice no wider than 11.75″, reduced the number of nodes if necessary, and exported the files as SVG for FCM using the proper DPI settings, then you are ready to transfer your files to your Scan N Cut machine for cutting. You can copy the files to a thumb drive, and plug them in to the machine’s USB port, or import them into Canvas Workspace to Transfer to your Scan N Cut.
Cut the pieces for your ScanNCut SVG Large 3D Rose, and you are ready to assemble your flower.
Large 3D Rose SVG Cutting File
You can get the FREE cutting file for this project as well as additional SVG projects in my FREE Resource Library.
>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<
This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.
If you already have your password, enter the resource library here.
Thanks!
Julie
cuttercrafter.com
