decoration decoration decoration
decoration
leaf leaf leaf leaf leaf
decoration decoration

How to make and use glitter paper for Patriotic Decorations

Now is a great time to make some patriotic decorations for your Independence Day celebrations.

Patriotic Decorations

Patriotic 3D floral centerpiece with DIY Glitter Paper

I saw some lovely glitter paper projects at a Stamp and Scrapbook convention, and I thought you might like to learn how to turn an ordinary piece of patterned paper into a sparkly paper. The glitter paper can then be used to create lovely 3D craft projects. This 3D flower, embellished with DIY glitter paper works perfectly for patriotic decorations for a variety of projects. Vinyl can then be used to add detail to the cut project.

Patriotic celebrations in the US call for Red, White and Blue decorations.  Pazzles Craft Room has a nice set of digital papers, and among them are some papers in these colors. Take a look through their digital paper collection when you need some seasonal papers for your projects.

Supplies Needed to Make Glitter Paper

Please note: Some affiliate links may be used in this post. I am affiliated only with products that I use. When you purchase products using my affiliate links, it does not cost you any more, but I will share some commission. Thanks!

White Cardstock- 65# Recollections 8.5”x11”
Pazzles Americana Digital Paper design 8.5”x11”
Scor-Tape 6”x6” sheet double sided adhesive, acid free and heat resistant.
Transparent Micro Fine Glitter 
Flower Shaping Tools – Large ball Embossing tool, foam pad
Designer Dries Clear Adhesive Glue
Black Vinyl
Pearl Sticker(s)
Red, White and Blue Ribbons
Tray, coffee filter or folded sheet of printer paper
Optional: Hair Clip, Flowers, Mug, Electric Candle, Card or Scrapbook page as you prefer.

How to Make Glitter Paper

Making Glitter Paper is easy with the correct supplies. First, print the paper you wish to use, or select a piece from your own paper collection. Then cut a selection from the paper that is a bit larger than the project that you wish to cut. Next cut a piece of scor-paper to fit the paper that you cut. Remove the backing from one side of the score tape, and stick it to the paper. Now  place paper in a tray, coffee filter, or on a piece of printer paper, folded in half. Remove the protective coating of the adhesive sheet.

Sprinkle Micro fine glitter over the entire surface of the adhesive sheet. Brayer over the glitter to press it into the tape. Rub the glitter paper with your fingers to make it smooth and add bling from the oils in your fingers. Tap off the excessive glitter onto the tray or printer paper. Finally, pour all excess glitter back into the bottle from which it came.

You now have some custom, DIY glitter paper in exactly the right colors for your project.

Cut Your Project Pieces

Perform some test cuts for each part of the project. Cut the flower layers from printed glitter paper on your cutting machine, glitter side up, using the cutting file. The cutting file is FREE for Pazzles Craft Room members. The file is also availabe to purchase in SVG, AI, and WPC formats, if you are not a member.

Create a Vinyl “Press and Peel” Outline

Cut the black portions of the design from black vinyl, being careful not to cut through the backing. Weed out the vinyl pieces that will not be used on the finished piece. Place vinyl transfer tape over the weeded design, and use a brayer and squeegee to adhere the vinyl to the transfer tape. Lift the transfer tape with the design off of the backing. Carefully line up the black vinyl design over the cut and glittered flowers. Burnish the vinyl, and remove the transfer tape.

Shape the 3D Flower

Place the flower layers color side down on double layered foam mat. Roll the large tip of the embossing tool around the center of each flower layer, and press
the tool from the outside of each petal towards the center. Turn the flower on the foam mat to have the right side up. Roll the embossing tool around
the center of each flower. Press down firmly in the center to lift the petals on each layer. Curl the tip of each petal back, using the small end of a small paint brush.

Assemble the 3D Flower

Place glue on the center back of the smallest layer. Put the smallest layer in the center of the medium layer, offsetting the petals. Place glue on the center back of the medium layer. Place in the center of the large layer, offsetting the petals. Press firmly down through all layers to lift petals. Place a large or five small pearl stickers in the center of the top layer of the completed flower.

Embellish A Project

Embellish the project of your choice with your completed 3D flower. Not only does the 3D Flower make a nice ornament for a vase centerpiece, it can be hot-glued to a hair clip to create a lovely patriotic decoration for the hair. Add some colored ribbons for a festive look.

Glitter Paper

Patriotic Flower Hair Ornament

Or you can add the DIY Glittered 3D Flower to  a jar to make a patriotic luminary to add to your patriotic decorations. Add an electric tea light to the jar, and glue the flower to the top of the jar. You can make a number of these to decorate and light up for an evening celebration.

Patriotic Decorations

Patriotic Decoration – Flower Topped Luminary

More Patriotic Decorations for Your Celebration

Patriotic Decorations

Exploding Box Centerpiece

You can make the title of this patriotic centerpiece shine with the addition of DIY Glitter Paper. I am sure you can think of lots of ways to make your patriotic celebrations sparkle by using some homemade glitter paper on your projects.

These Patriotic Decorations work well not only for Independence Day celebrations, but also for Memorial Day,  and Veteran’s day. You can add to them for next year’s celebrations as well!

Please show off some of your Patriotic Decorations in our CutterCrafter Facebook group!

Thanks,

Julie

 

 

 

 

 

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

loading
×

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below. If you already have your password, enter the resource library here. Forgot your password? I put the password at the bottom of nearly all of my emails. But if you can’t find one of my emails to you, you can either fill out the form above again or email me at hello@cuttercrafter.com Password Tip: I recommend you copy and paste the password in to avoid any accidental mistakes. If you ever forget your password, please email hello@cuttercrafter.com Not working? If you enter the password and the same page refreshes, without any contents, that means you put in the wrong password. Double-check your email, copy the password, and paste it in to the link above. Still not working? I promise the password works—I haven’t changed it since I opened the library.   Try the copy/paste method again and make sure the URL you are going to has https at the start of it (that’s a secure page and it makes a difference). If that still isn’t working, try a different web browser.
%d bloggers like this: