decoration decoration decoration
decoration
leaf leaf leaf leaf leaf
decoration decoration

Make a Father’s Day Popup Card

DIY Happy Father's Day Popup Card

Father’s Day Popup Card

You can make this Father’s Day Popup Card even at the last minute for the beloved fathers in your life.  The popup on the inside of the card is simple.  You can decorate inside, outside, and back of the card if you want to get creative.

Download the Cutting Files

You can download the free SVG cutting files from our Resource Library to make a Father’s Day popup card like this one. The cutting files include pieces for the base popup card, backing card, and decorative layer pieces. The completed popup card measures 7″ wide by 5″ high when closed. You can use the same envelope provided in the Motorcycle popup Card template in the Resource Library .

Pin for Happy Father's Day Popup Card

Happy Father’s Day Popup Card

Supplies to Make a Father’s Day Popup Card

Please note: Some affiliate links may be used in this post. I am affiliated only with products that I use. When you purchase products using my affiliate links, it does not cost you any more, but I will receive a small commission. Thanks!

80# white cardstock for the card base.
Medium weight  cardstock for the lettering and clouds.  I used double sided paper from the Wilderness Retreat Collection for the printed layers.
Wilderness Retreat Collection dies for layer embellishments or use scissors to fussy cut shapes of your choice from the paper collection.
Gold metallic cardstock if desired for the Sun
Electronic Cutter (I used Pazzles Vue) or you can use Cricut Explore or Maker  or Cameo 4  or Scan N Cut
Pen holder, pen spacer and pen for cutter.
Art Glitter Glue
Pop Dot Adhesives
Crystal Clear glitter Optional
SVG Cutting File from our Free Resource Library

Cutting Instructions to Make a Father’s Day Popup Card

The cutting files you need to make a popup Father’s Day Card are all included as shown below.

Cutting files to Make Father's Day Popup Card

Image of Cutting files to Make Father’s Day Popup Card

The card back is on the left in blue.  It has a score line at the center. You can cut this piece from green cardstock. Or you can cut a 6″ wide panel from the Wilderness Retreat Collection paper pad from Heartfelt Creations as I did. Since it is double sided paper,  I selected a page that had the blue background that shows up under the cut out pieces on the inside of the popup card. The opposite side of the paper formed the background of the front of the card.

Open Front of Father's Day Popup Card

Open Front of Father’s Day Popup Card

This paper included another design on the bottom half that made a nice backing for the card.Bottom of Father's Day Popup Card

Bottom of Father’s Day Popup Card

In the cutting file, the base card is cut from white cardstock.  80 # cardstock works best to keep the popup strong.  Be sure to score the red lines first, then cut the black lines. Notice that the score lines are all solid red lines. Use a scoring tool for these lines, or retract your blade and reduce cutting pressure to score the surface of the card with your blade.

Father’s Day Popup Card Layers

The green pieces are for the inside layers of the card. There are two sizes of mats you can use. I used only one.  I cut the top portion and the tab layers from a blue printed piece, and the bottom portion from one of the outdoor scenes in the card pack.  In order to make the lettering stand out, I cut them from black cardstock. You can cut the sun from the Lux Gold cardstock, which is quite eye-catching, or you can use yellow cardstock.

Before cutting the white cloud with text, use your pen in the pen holder for your machine to draw the text. Then replace the pen holder with the cutting blade holder to cut out the cloud. You may also cut the 2nd cloud at the same time.

If you would like to add more interest in the card, cut out the flowers, critters, eagle, grass, water, etc. to add to your scene. You may use the cutting dies from the Wilderness Retreat Collection, or simply use scissors to fussy cut them. I added the deer and grass layer and an eagle to the back side of the card.

Cutting Instructions for Cricut Explore or Cricut Maker

If you are using Cricut Design Space, upload the SVG file for the Father’s Day Popup Card into Cricut Design Space. Then right click on the design and select Ungroup. You need to designate each of the red lines as score lines in the Line Quality panel at the top of the screen.  Select the card and its score line, right click, then click on Attach.

Next, select the base card and its score lines (in black). Right click and select Ungroup. Select the score lines from the layers panel, and set them to Score in the line quality panel. Hold the Shift key to select also the card layer. Then right click and select Attach.

Text Sentiment

Select the cloud with text and ungroup. Select the text and set it to Draw in the Line Quality panel. Change the cloud color to White. Select the cloud and text, right click, then select Attach. Now you are ready to Make it. Check each color layer to make sure the pieces look correct in their layers.

Cricut Cutting file image for Fathers Day Popup Card

Fathers Day Popup Card layout for Cricut Design Space

 

Make It

Go to the Make It screen to make sure the score lines show up on the same layer as the corresponding cutting lines.  If you get a separate red mat, then the lines were not attached properly to their cutting shapes. Go back to fix that.

There is a video tutorial showing how to use popup cards with Cricut Design Space here. Cricut Design Space has been updated a bit since the video was made.  The updated software now has a Line type Menu at the top of the screen near the left side. The only difference right now is that instead of clicking on the color box on the Layers menu on the side of the screen to change from a cut to a score line as shown in the video, you will select your line in the layers panel on the side of the screen, then click on the tiny down arrow at the top of the screen under Line type. Select Score. After you have designated a line to be a Score Line, hold the shift key, and select the shape of the card. Then Right click and select Attach.  The color selection box is next to the Cut Menu as well.

Cutting Instructions for Scan N Cut

There is a set of multiple files for Scan N Cut users for this Father’s Day Popup Card, since Brother Canvas Workspace can accept only a single 11.5″”x11.5″” file at a time. Import one file at a time to cut and score. Make sure that the red lines are designated for score or draw.

Assembly Instructions

After you have all of the pieces cut out, it is time to start assembling your popup card.  First remove the loose pieces from the popup card design. This process is called “weeding”.  When these pieces are removed, you will be able to see through some parts of the popup card to the backing.

Next, glue the layers to the top and bottom inside of the card.  Now glue the black lettering over the letters on the popup card.

Folding the Popup Card

First you need to fold your pieces along the score lines.  Fold the backing card in half on the score line and crease it. Next, fold the sides of the white base card, pinching from the back of the card to make valley folds. There are two short fold lines on each side.  Now pinch the score lines at the tops of the tabs from the back to make valley folds. Also, make valley folds by pinching from the back on the score lines at the bottoms of the letters.  Make mountain folds on the score lines at the top of the letters.  Use a bone folder to make crisp fold lines. Gently push the back of the card up.

Then gently fold the card closed all the way, so that it is flat.

Now that the folds are made, check to make sure that the card opens and closes smoothly. Open the card, and glue the remaining decorative pieces to the upper and lower parts of the card background. There are also pieces to glue on the tabs, if you wish to use them.

Once you have all of the decorative pieces in place, fold the card closed.

Final Assembly of the Father’s Day Popup Card

To glue the popup card to its backing card, place the center crease of the folded card in the inside crease of the backing card as shown below. Use quick drying glue around the edges of the white base card, making sure not to get glue on any of the motorcycle parts. If you are using 6″ wide backing card, and 7″ wide popup card base, you will need to center the printed backing to the white base.

Place popup base card inside backing card.

Place popup base card inside backing card.

Close the backing card down over the white base card. Then rub all over the backing to make sure it stays in place until the glue dries.  Once the glue is dry, turn the card over. Glue the other side to the backing card.

Glue the popup card to the back.

Glue the popup card to the back.

With glue on the other side of the white popup card base, close the card again, and hold firmly in place until the glue dries. Then you can open the card.

 

Add Decorative Elements

Now you can decorate the front of the card as you like.  Use pop-dots to add dimension to the various character animals that you want in your scene. You can use pop-dots behind the clouds and sun as well.  Once you have everything in place as you want your scene to be, you can add some glitter if you like. To add glitter, put some thin lines of glue that dries clear in the places where you want some sparkle.  Than sprinkle some glitter over those areas, and pour the excess back into the bottle.  Let the glue dry completely.

Decorate the back of the card in like manner.  Now add a personal note. When your card is complete, place it inside of an envelope. Now it is ready for giving or posting it to a special father in your life!

Get the FREE SVG Cutting File

Happy Father's Day Popup Card Pin

Happy Father’s Day Popup Card

You will find the cutting files for this  Father’s Day Popup Card in the Free Resource Library.  

 

Enjoy!
Julie, cuttercrafter.com

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

Impossible Butterfly Popup Card

You can make this lovely Impossible Butterfly Popup Card with the SVG cutting file from the Free Resource Library. It will make a lovely gift for someone special. The card base is made from a single piece of heavy cardstock, and yet the center pops up in a seemingly impossible way! This special Impossible Card includes a dimensional butterfly, whose wings pop out from the card base. The card makes a lovely conversation piece when displayed on the mantle or coffee table.

Impossible Butterfly Popup Card

Impossible Butterfly Popup Card

 

Supplies Needed to Make the Impossible Butterfly Popup Card

Please note: Some supplies may include my affiliate links. I am an affiliate only for products that I use. Your purchase from my links will not cost you any more, but they will help support my blog. Thanks!
Digital Paper from Pazzles.
Medium Weight Cardstock
1 sheet 110# cardstock
Strips of Double-Sided sticky tape 1″ wide
6”x6” grey square jpg file included with the cutting file.
Electronic Cutter (I used Pazzles Vue)
SVG Cutting File from our Free Resource Library
Pop Dots
Art Glitter Glue Dries Clear Adhesive
The Font used for this project is Aubrey Script

 

Printing Instructions

I used Digital Paper from Pazzles. But you may use printed papers of your choice.
Resize the digital paper to the following measurements, and print on medium-weight cardstock.

Impossible Butterfly Popup Card

Printed Digital Papers

Light Pink paper is cut from Stripes resized to 8.5”x7”
Yellow pieces are cut from yellow paper resized to 8.5”x6”
Blue resize to 8.5″x5″
Dark pink resize 8.5″x3″
Print the 6”x6” grey square jpg file.
When printing, use the Best Quality setting on Plain Paper in your printer Preferences.

Print the sentiment on pink paper and cut around it using the piece for it in the SVG cutting file.

Impossible Butterfly Popup Card

Printed Sentiment

SVG files are provided All in one file or in three separate files for your convenience. However, if using the All in one file, you do not need to use the separate files.

Impossible Butterfly Popup Card

Cutting Pieces

Cut the File Pieces

First cut the file pieces with the black lines on 110# heavy cardstock using the chipboard setting. Next, score the red line without removing the mat from the machine. Do not move the cutting head. You may use a scoring tool, or cut the score line with a retracted blade and lower cutting pressure.

Impossible Butterfly CArd

Cut Card Base

Folding Card Base

After you finish cutting and scoring the card base, remove it from the cutting mat. Then fold the center portion of the card towards the front, and use a bone folder on the crease.

Impossible Butterfly Popup Card

Twist right side to back

Now, twist the right section of the card to the back, and press the side portions flat, allowing the center to pop up.

Impossible Butterfly Popup Card

Twist right side to back

Make Glitter Paper

See detailed instructions for making Glitter Paper in a previous post. In this project I used 1″ wide double stick tape instead of a sheet of scor-tape.
Use double sided sticky tape over the entire printed grey piece that you printed. To use it, first remove the backing. Next, adhere the sticky strips to cover the grey paper. Then Remove protective layer off the front of the tape.

Impossible Butterfly Popup Card

Cover the grey paper with double sided sticky tape strips.

Sprinkle the sticky tape with glitter. Next, brayer over the glitter. Now, rub the glitter with your finger. Finally, sprinkle off the excess glitter, and pour it back into the jar.

Impossible Butterfly Card

Glitter paper ready to cut.

Next you can cut the large and small grey butterfly pieces, as well as the sentiment mat from the glittered paper. Use your poker tool to remove small inside pieces that did not stick to the mat. See the resource document for information on cutter crafting tools in the Free Resource Library.

Impossible Butterfly Popup Card

Cut Butterflies

Assembly of the Impossible Butterfly Popup Card

Now, your cut pieces are ready to assemble.

Impossible Butterfly Popup Card

Cut pieces are ready to apply to the card.

Butterfly Assembly

Bend the butterfly wings forward. Glue only the center body part of the butterflies when assembling layers.
Next, glue body of the large lacy butterfly to the solid pink butterfly. Then glue the body of the pink butterfly to the striped mat. Finally, glue that mat to the blue mat, aligning the tops of the pieces to each other.

Impossible Butterfly Popup Card

Assemble the butterfly layers.

Now you can glue the butterfly layers to the card base, aligning the tops of the design. The edge of the bottom layer should line up with the score line.

Impossible Butterfly Popup Card

Glue the butterfly layers on the card.

Next, center yellow panels to the card base and glue in place.

Impossible Butterfly Popup Card

Add decorative panels.

Tag Assembly

The larger tag and mat for the back side of the card is for writing your personal greeting. First, glue the yellow journaling piece to its mat. Then center the tag on the back side of the card with the edge flush against the fold line to give support for the butterfly popup. Now, glue in place. Finally, to finish the back side of the card, glue the striped panel to the back side of the butterfly.

Impossible Butterfly Popup Card

Back side of the card.

Card Front Embellishments

Now you are ready to add the embellishments to the front of the card. First glue the long narrow rectangle to its mat. Center it on the front bottom part of card. Then glue in place.

Impossible Butterfly Popup Card

Front panel

Now, add pop dots to the back of the sentiment, and place on the grey mat. Then glue the assembled sentiment at an angle on the left front side of the card over the decorative strip.

Impossible Butterfly Popup Card

Add the Sentiment

Next, bend the wings of the small butterflies upward. Then glue the body of the smallest butterfly to the pink butterfly. Finally, glue the body of the pink butterfly to the bar on the front, over the open space.

Impossible Butterfly Popup Card

Small Butterfly Embellishment

Finished Impossible Butterfly Card

Now you can display your finished card.

Impossible Butterfly Popup Card

Finished Impossible Butterfly Popup Card

When it is folded flat, the card will fit in a 7″ square envelope for mailing.
The recipient of your card is sure to be encouraged by your lovely card.

Love,
Julie, cuttercrafter.com

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

How to Make an All-Occasion Tri-level Popup Card

Create the Tri-Level Popup Card

In this post, you will learn how to make an All-Occasion Tri-level Popup Card. The FREE SVG file for this card is available in the free Resource Library.

 

Tri-Level Popup Card

Tri-Level Popup Card ready for decorations

Supplies Needed for the Tri-Level Popup Card 

Please note: Some supplies may include my affiliate links. I am an affiliate only for products that I use. Your purchase from my links will not cost you any more, but they will help support my blog. Thanks!

Free SVG file for the Tri-Level Popup Card

100# white cardstock for popup card

81# text weight Stardream Quartz metallic paper for small Magnolia Flower

81lb Text Fairway Green  Metallics paper for inside card mats.

80lb Text Botanic Green Curious Metallics paper for Small Magnolia Flower leaves.

Dark green cardstock for card Backing

Decorative sentiment for outside card: Heartfelt Love Paper Collection by Heartfelt Creations

Small dogwood Flowers – Free SVG cutting files from CutterCrafter.com

Dries Clear Art Glitter Glue: Heartfelt Creations

Pearl Stickers

Transparent Micro Fine Glitter

Cut out the Card, Card Backing, and Mats for Inside Overlays

The FREE SVG cutting file for this card may be imported into the software used with your electronic cutter. You may resize the project once you have it imported. I resized the main card backing to 6″x 12″. The popup portion of the design measures  5.5″x11″. The finished card measures 6″x6″ when closed. Cut the black lines first. Without removing the mat from the machine or moving the cutting head, change from the blade to an embossing tool, or set the blade depth and cutting pressure to low settings.

Next, select the red and blue lines and score them. Now cut the light green pieces from the paper that you want to use as mats over the popup card. Cut the dark green lines from the card stock you wish to use for the card backing. Cut any pieces that you wish to use to decorate the inside and outside of the card.

Tri-Level Popup Card

Cutting pieces for the Tri-Level Popup Card

Folding the Popup Card

Pinch the center fold line of the popup card from the back side to create a valley fold. Nudge all of the popup pillars up in the opposite direction of the center fold.

Tri-Level Popup Card

First Folds, Center sides of popup card.

Before folding the remaining parts of the popup card, glue the mat pieces in place. It will help to keep the cut pieces on your cutting mat so that you can see where the pieces go on the card. Remove one piece at a time, add some glue on the back side around the edges of the piece, and place on the card. Repeat with each mat piece until all pieces are in their proper positions.

Tri-Level Popup Card

Mat Pieces glued in Place.

From the back side of the card, pinch on the valley folds at the top and bottom of each popup pillar. Then pinch from the front side on the mountain fold on each pillar. Carefully fold the card closed all the way.

Tri-Level Popup Card

Closed Popup Card

Tri-Level Popup Card

Mountain and Valley folds on the Popup Card

Glue the Popup Card to the Backing Card

Now you are ready to  glue the top side of the popup card to the inside top of the backing card. Add glue only to the back side of the top portion of the popup card. Avoid getting glue on any of the pillars, so that they can pop up properly. Line up the center fold of the popup card into the center fold of the backing card, glue side up. Next, carefully close the backing card over the popup card. Press firmly in place until the glue is dry.

Turn the card over, open the backing card, and apply glue to the white popup card. Again, apply glue only around edges of the card, making sure that you do not get any glue on the popup pillars. Close the card and press down until the glue is dry. Now you can open your card and inspect it to make sure that it folds open and closed correctly.

Tri-Level Popup Card

Print and Cut Some Clipart

After you have cut out the pieces for your card, and assembled it, you can decorate your Tri-Level Popup Card for any occasion. Simply add the decorative elements to the panels that pop up, as well as on top and bottom inside of the card, and the front of the card. You can add the titles and sentiments of your choice. Here is how I decorated my Tri-Level Popup Card on the inside. I used some clipart posted for free download this week from DesignBundles.  There are so many designs from which to choose. These are the design pieces that I used. Size your design pieces to fit the card. The widest pieces should be no wider than 5″ wide in order to fit well on the card. Duplicate pieces that you would like to use as layers over the base designs.

Create a 3D Decoupage Effect by Layering Pieces

Cutting two of each design pieces will give you the option to layer pieces for a 3D Decoupage effect. You can see a video tutorial on how to do this using a Pazzles Cutter with the Pazzles InVue software, or using Make The Cut software. I use the Pazzles Software when creating files for use with Cricut Explore or Cricut Maker, and Make The Cut software  for use with Scan N Cut , KNK Zing, Cameo, and older Cricut machines. The two wider pieces are downloaded as bouquets. Individual flower elements are cut and layered over the flowers in the bouquets to give the design more depth.

Shape Your Printed Flower and Butterfly Pieces

To get a dimensional look with your printed designs, use Flower Shaping Tools and a foam mat. Use a medium size embossing tool on the back sides of the printed flower shapes. Tap the tip of the embossing tool on the back side of each petal, and roll in circles in the center of each flower to give the edges some life. Turn the flower over on the foam mat, and press the embossing tool firmly in center. Shape the larger bouquets in similar fashion. Put a dot of glue on the center back side of the flower, and place it over the corresponding flower in the bouquet. Hold in place until the glue is dry. Repeat with as many layers as you like. You may add small lines of glue on your design pieces, then add some glitter to them to make them sparkle.

Tri-Level Popup Card

Butterflies and Flowers Clipart from DesignBundles

Decorate the Inside of the Tri-Level Popup  Card

You are now ready to glue your 3D decoupage designs onto the popup card.

Tri-Level Popup Card

Decorated Tri-Level Popup Card

Decorate the Outside of the Tri-Level Popup Card

And this is the outside of my tri-level popup card, decorated as a card of encouragement for friends who are having a hard time right now. I used some paper from  Heartfelt Creations Love Collection. I also used the small magnolia flower from our Free Resource Library on the front of the card. You can use some of the same paper you used for the mats on the popup card, to create a mat for your chosen sentiment. Add some decorative elements such as the Small 3D Magnolia flower, and tiny pearl stickers. Or you can use other decorative elements that you have on hand.

Tri-Level Popup Card

Outside view of decorated Tri-Level Popup Card.

Please share your decorated cards with us.

 

 

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

If you found this post helpful, please share, comment, and like  with your friends on Facebook, Twitter, Instagram, YouTube, and groups that you are in. Send them here to get all the details, and free resources.

Thanks!

Julie, cuttercrafter.com

loading
×

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below. If you already have your password, enter the resource library here. Forgot your password? I put the password at the bottom of nearly all of my emails. But if you can’t find one of my emails to you, you can either fill out the form above again or email me at hello@cuttercrafter.com Password Tip: I recommend you copy and paste the password in to avoid any accidental mistakes. If you ever forget your password, please email hello@cuttercrafter.com Not working? If you enter the password and the same page refreshes, without any contents, that means you put in the wrong password. Double-check your email, copy the password, and paste it in to the link above. Still not working? I promise the password works—I haven’t changed it since I opened the library.   Try the copy/paste method again and make sure the URL you are going to has https at the start of it (that’s a secure page and it makes a difference). If that still isn’t working, try a different web browser.
%d bloggers like this: