Black Friday Deals for Crafters 2019
Black Friday Deals for Crafters 2019
Here are some Black Friday Deals for Crafters 2019. Black Friday is a great time to stock up on crafting supplies. Look for great deals on the high-priced items that help you to be more productive. Do you need a better cutter? Is there a Foil Press on your wish list? Or perhaps you need a more efficient die cutter/embosser to handle those very intricate dies. Maybe you need a new computer or external hard drive. Do you need a new printer?
If you do not need a new machine, perhaps you need to stock up on consumable supplies for your crafting projects. Is your stash of paper or vinyl, or HTV dwindling? Do you have plenty of adhesives? Be sure to check your supply of blades and mats for your machines! There are lots of Black Friday Deals for Crafters that could save you money on your craft supplies.
Black Friday Deals for Crafters
Items on this page may contain affiliate links. You don’t pay any more for your purchase, but I do get a credit for it.
More Black Friday Deals for Crafters
Machines
Pazzles Inspiration Vue Cutter – See my review here. Best deal of the year for this machine! Don’t miss this best buy of the Black Friday Deals for Crafters! Grab this excellent electronic cutting machine for up to $300 OFF on Nov. 29 through December 2. Plus if you order by Cyber Monday you’ll get a free mat pack and spatula too! $239 + 6 months FREE to the Craft Room or an Inspiration Vue for $169 with a 1 year Craft Room commitment! Or go here to pay only $99 with a two year commitment to the Pazzles Craft Room.
Silhouette Cameo 3 – Look for low prices with newer model coming out.
Silhouette Cameo 4 Get a great deal on a bundle. Check out the Pre Black Friday Sale Nov. 20-22 for a great bundle special.
Gemini Die Cutting/Embossing Machine Great price for a power machine! I ordered one, plus the plates for the Gemini Jr to use with this. Get this machine or the Gemini Jr. to use with the new Gemini Foilpress. Gemini Jr is only slightly less than the full size Gemini. So unless you really need the smaller size of the Jr. 6-inch width, I recommend the full size Gemini. You will need an extended plate for the Foilpress to work in the full size Gemini. See my review here.
Gemini Mini Die Cutting/Embossing Machine I really like this new little machine. Use a folder to cut or emboss with no need to fret about a stack of cutting plates. This is a hand crank machine, with a 3″ cutting or embossing width.
Empress Mini Die Cutting/Embossing Machine This is a quiet electronic die cutting/embossing machine with a 4.25″ cutting or embossing width. Light weight, but will handle dies and folders for a full A2 size card.
Spellbinders Blowout Sale Lots of goodies. They have a great buy on their Prizm Die Cutting/Embossing machine if you are in the market for a mini hand-powered machine. Also great prices on some amazing dies, and card kits as well.
Scan N Cut
Scan N Cut2 – Great Clearance options.
Scan N Cut DX-Latest cutter from Brother. See my SNC review here.
Brother SNC Universal Pen Holder Allows you to use standard pens in your new or older model Scan N Cut machine.
Scan N Cut Standard Mat for CM models or SNC2
Scan N Cut Online Activation Card for WiFi connection This is not needed for the newer DX SNC models.
Cricut
Cricut Maker New LOWEST price ever! Cricut Explore vs Cricut Maker-Review.
Cricut Explore Air 2 Bundle new low price.
Cricut Cutting Mats – Standard Grip
Cricut Cutting Mats – Variety Pack
Cricut Easy Press 2 9″x9″ Higher heat options for Cricut Infusion projects
Cricut Easy Press 2 12″x10. Necessary for larger Cricut Infusion projects.
Cricut Easy Press Mini for those smaller projects.
Cricut Cuttlebug Special bundle
Cricut Ultimate Fine Point Pen Set Assorted
Cricut Infusible Ink Markers Set of 30 Great deal on a bundle of markers to give you a large selection of colors for your infusible projects.
Cricut Rotary Blade Kit– See my review here.
Nicapa Mats for Cricut– Set of Three. These work just as well for me as the original Cricut mats.
Tools
A4 LED Ultra Thin Light Box Tracer – Not quite as bright as the Cricut Bright Pad, but the price is right and it works well for weeding vinyl.
Crafter’s Companion NEW! Professional Guillotine Large 13″ long, compact and light weight. Great for trimming! Side arm extends 13″ . Metric and Imperial measurments, scoring stylus, and scoring grid.
Temperature Gun – check the actual heat of your iron, heat press, heated project, etc.
Heartfelt Creations Deluxe Flower Shaping Kit I use this kit for shaping my 3D flowers. See my blog tutorial and my video tutorial for shaping paper roses.
Spellbinders Tool In 1 Great for brushing the tiny pieces out of intricate cuts.
Tim Holtz Stamp Platform I love this for getting perfectly stamped images.
Sizzix Extended Cutting Plates
Candle Warmer – for shaping thin foam into flowers
Hand Engraving Tool – Insert in cutter pen holder. You may need to wrap tape around it to fit in the pen holder.
Dog Tags for engraving Engrave a blank tag for your pet using your engraving tool with your cutter!
Three Hole Punch – great low price. I use this regularly for organizing craft items in binders.
Pink Tool Set– Every crafter needs their own set of tools handy for everyday use. I got these. My hubby doesn’t like pink, so I might be able to keep them around for awhile.
Lighted Magnifying Glass – great for callibration tests on cutters.
Adhesives
Dries Clear Adhesive – My favorite craft glue that dries quickly, and dries clear. Love the fine tip applicator.
Bulk Dries Clear Adhesive Refill – Use this to refill your smaller glue bottle with fine tip applicator.
Alenes Tack It Over and Over – Mix 1 part glue to 2 parts water, and apply to cutting mats using a foam paint brush for the least expensive way to make them sticky again.
Zig 2-Way Glue – Most convenient way to restick cutting mats, and very effective.
Mini Hot Glue Gun – Great for making 3D paper or foam flowers
Mini Glue Sticks – Refills for Mini Hot Glue Gun
Scor-tape Sheets love this for making boxes and other 3D projects
Paper and Cardstock
See my Blog Post on the Best Paper for Crafting here.
80# white cardstock Excellent cardstock for print and cut projects. The printer can handle it, and it cuts well.
100# white cardstock Great for cutting popup cards and stamped flowers for coloring and shaping into 3D flowers.
110# White cardstock Great for 3D projects
12″x 12″ Assorted Color cardstock 150 sheets Variety of weights, most between 65# and 80#
8.5″x11″ Recollections 65# cardstock Variety color pack
Laser Color Copy paper – for use with Infusible Ink products from Cricut
Translucent Vellum 36# Cardstock – great for embossing
Recollections Cardstock 12″x12″ 8.5″x11″ Several shades of each color make this a great package for multi-layered projects. These are less expensive if you purchase using a coupon or 40-50% off sale in store or online.
Foam
Thin Foam Sheets for Flower Making – 1mm thick, assorted colors, 24 pieces, 9.8″ square.
See the foam flowers I made using these here and here and here and here.
White Flower Making Foam .8mm thick, 30 sheets
Thin White Foam Paper for Flower Making
HTV and Sublimation
Heat Transfer Vinyl (HTV)
15″x 15″ Heat Press If you do a lot of Heat transfer vinyl on garments, you need a heat press. The size is right on this one, and the best price I could find.
15″x 12″ 8 in 1 Heat Press combo – This allows you to create your Heat Transfer vinyl projects, Cricut Infusion Projects, as well Sublimation projects, including attachments for mugs, hats, dishes, etc. This is the one I have. Check out this bundle that has all you need to get started with Sublimation, or purchase items separately.
5 in one Heat Press combo 15″x12″ Nice sale price on this for Black Friday.
Mug Heat Press You can get this if you do not want to do shirts or plates or hats that the 5 in 1 or 8 and 1 presses do.
Epson WF 2760 Printer – Use with sublimation ink.
Sublimation Ink for Epson WF 2760– Print designs on sublimation paper, and transfer to project blanks
Foiling
Brother Monochromatic Laser Printer – for printing toner sheets to foil with deco foils and laminator.
13″ wide Thermal Laminator – For general laminating and for use with toner sheets and deco foil
12″ Deco Foil – for use with laminator
Gemini Foil Press – For use with Gemini Jr. ( or full size Gemini with Extender plate) and Hot foil – See my tutorial for foiling.
Gemini Foil Bundles – For use with Foil Press, NOT for laminator.
Foil Quill Starter Kit Great tool for use with your electronic cutter to add lovely foiled designs to your projects. Let the machine do your drawing and writing for you!
Foil Quill Freestyle Pen Starter Kit Add elegance to your hand-drawn or traced sentiment and signature.
Foil Quill Magnetic Mat Magnets hold your foil in place to simplify foiling with machine or by hand.
Electronics
HP Laptop Computer –Hp Pavilion Gamin 15-inch Laptop, Intel Core i5-8300H Processor, NVIDIA GeForce GTX 1050 Ti, 8 GB RAM 1 TB hard drive and 128 GB SSD, Windows 10 Home (15-cx–30nr, Black)
SanDisk 54Gb Flash Drive This will work to transfer SVG files to the Scan N Cut. I keep a dedicated thumb drive for that purpose.
Portable 4TB External usb Drive – Great for storing backups of all of your printables, cutting files, and fonts collections
6TB External Hard Drive- back up your entire computer. It would be a shame to lose it all!
Instant Pot Duo 6 qt. – I love my Instant Pot. I can do a lot of crafting while it does the cooking!
Blendtec Blender – My favorite Smoothie Maker at a great price!
Flameless Candles for those lantern projects
Set of 9 Flameless Candles Great for use with your holiday luminary projects.
Aromatherapy Essential Oil Diffuser – Create a relaxing and healthy crafting environment
Echo Input – Alexa sent to your computer speakers to add Instant music for your crafting environment.
Pens, Markers, Pencils
Ultra Fine Micro Line Pens set of 16 I couldn’t resist purchasing another set of these at this low price.
Sharpie Fine Point pen set of 24 colors Can you even have enough Sharpies? These fit in my pen holders to draw with my machines.
Derwent Watercolor Pencils set of 24 now at a reduced price. I love these for coloring my 3D flower creations.
Artists Choice Watercolor Pencils set of 72 More colors in this set, but the colors are not as intense as those in the Derwent set.
Set of 88 Alcohol Dual Tip Markers with case.
Prismacolor pastel color sticks
48 Colored Pencils– less expensive, but less dense pigment than Prismacolor colored Pencils.
136 colored pencils – Best deal
Arteza Real Brush Pens set of 96 with case.
Art Media
Prills – Use to embellish centers of 3D flowers
Stamens – Use to embellish centers of 3D flowers
Ultra Fine Glitter This is what I use with the Scor-tape Sheets to make patterned glitter paper. See my tutorial here.
Modeling Clay, 24 colors plus tools – Tools can be used to shape clay, fondant, and/or 3D flowers.
Arteza Watercolor Premium Artist Paints Set of 24 Colors
Art Supplies for Children – Great kit, including crayons, colored pencils, watercolor paints, pastels, tools, etc in a wood case when children want to craft with you.
Stamp set-nice for children
Tim Holtz Distress Inks – Excellent for adding color to foam flowers!
Stencil Brushes – Great for “Hot Mess Canvas” painting.
Learn to Use Your New Crafting Machines
Check back here, at Cuttercrafter.com for tutorials and cutting files to use with your new crafty purchases. You will find some FREE projects to try in our Free Resource Library.
Would you like to see some of my FREE SVG projects? Check them out in my FREE Resource Library.
>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<
This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.
If you already have your password, enter the resource library here.
Baby Crib Popup Card FREE SVG
A Baby Crib Popup Card FREE SVG file is available for download now in the free Resource Library.
Do you need a nice card for a baby shower or gift? This lovely card is decorated for a girl, but it could just as easily be decorated suitably for a baby boy. The card folds flat for delivery. When it is opened, the crib pops out. There is plenty of room inside for you to write a message and sign the card. You can put a gift card inside as well. The card measures 5.25″ wide by 7″ tall. You can resize the card according to your needs.
Baby Crib Popup Card
Supplies Needed for the Baby Crib Popup Card
Please note: Some supplies may include my affiliate links. I am an affiliate only for products that I use. Your purchase from my links will not cost you any more, but they will help support my blog. Thanks!
Free SVG file for Baby Crib Popup Card
Recollections 110# cardstock for popup card backing
81# text weight Stardream Quartz metallic paper for small Magnolia Flower
81lb Text Green Metallics paper for card mats and Pink Metallics paper for the front sentiment and the crib skirting.
80# white cardstock for Crib
12″ 1/8″ wide white satin ribbon
80lb Text Botanic Green Curious Metallics paper for Small Magnolia Flower leaves.
Small dogwood Flowers – Free SVG cutting files from CutterCrafter.com
Assembly Instructions for the Baby Crib Popup Card
Cutting Instructions for the Baby Crib Popup Card:
Cut out all pieces in your choice of colors. If you wish to resize the card, select all, and resize proportionally so that all pieces fit together well. When importing the SVG file into your cutting software, check the sizing, and resize as necessary. The outside card measures 10.625″ wide by 6.875″ tall. The crib pieces together measure 10.5999″ wide by 3.791″ tall. The sentiment pieces measure 4.973″ wide by 3.182″ tall. The crib skirting piece measures 10″ wide by 1.579″ tall.
The red lines are score lines, set to cut with tiny dashes. If you are importing the design into Cricut Design Space, ungroup all first. If you prefer to use a scoring tool rather cutting dashes, you can import the score line from Shapes, and place those over the dashes. You can then delete the dashes, or hide them on the Layers toolbar. Next, select each piece with its score lines, right click, and select Attach.
In case you need to change the sentiment, or add more cutting text, the font used was GE Curviture.
Folding Instructions for the Baby Crib Popup Card
Make valley folds for the score lines on the outer and inner cards. Make mountain folds on the white crib pieces and the skirting piece. Crease the scored lines using a bone folder or other folding tool.
Shaping and Assembling the Magnolia Flower
See the instructions for shaping and assembling the small Magnolia flower included in the Tips for Cutting Basswood on the Cricut Maker blog post. Scroll down to the paragraph on Decorate Your Cut Basswood Tree. The cutting design for the flower is available in the Free Resource Library.
Glue Crib Pieces
There is a tab on one end of each of the crib piece. Glue the end without the tab over the tabbed end of the other piece. When dry, glue the plain end of the crib over the tabbed end. This will form a 3D box. Press the box flat from side to side to make sure it folds and unfolds easily. The skirting, the piece with the scalloped edge, is next. Glue the plain end over the tabbed end. Place the skirting inside of the crib piece so that the scalloped edge show below the crib rails. The straight edge of the skirting is visible through the crib rails. Glue the skirting at each of the corners formed by the legs. Also, put a dab of glue in a few other places along the bottom crib rail to hold the skirt in position.
Putting the Baby Crib Popup Card Together
Glue the inside mat piece to the inside of the card. Be sure to line up the score lines. Make sure that the card opens and closes easily. Glue the sentiment for the front of the card on to its mat. Glue the mat to the front of the card. Put glue on the back side of the crib. Line up the feet of the crib just inside the bottom of the card. Glue the back side of the crib, with the back left corner snugly in the center fold of the card. Add glue to the left end of the crib piece. Next, close the card, and hold firmly in place. When dry, check to make sure the card opens and closes properly.
Decorate the front of the Card
Add pearl stickers to the ribbon strips. Now glue the ribbon to the top and bottom of the front of the card. Fold three of the butterflies that were cut out of the inner mat piece, and glue just their centers over the butterfly shapes connecting the sentiment on the card front. Next, add a row of 4 pearl stickers to the center of each butterfly. Now, assemble a small magnolia flower, and glue it over the ribbon on the bottom front of the card.
Add Pearl Stickers to the butterflies on the Inside of the Baby Crib Popup card.
Place the pearl stickers across the centers of each of the cut out butterfly shapes on the inside card mat. If desired, use more butterflies with folded wings and pearl centers on the front side of the crib. Add any additional greeting on the inside. Now your card is ready to bless its recipient.
Baby Crib Popup Card
Get the FREE CUT FILES FOR the Baby Crib Popup Card and the Small Magnolia Flower
You can get the SVG cut files for the Baby Crib Popup Card and the Small Magnolia Flower as well as some of my other FREE SVG projects from my FREE Resource Library.
>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<
This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.
If you already have your password, enter the resource library here.
Love,
Julie, cuttercrafter.com
Make an Oval Accordion Card
Make an oval accordion card.
You can make this oval accordion card using the FREE SVG cutting files posted in our Free Resource Library. Make it using as many or as few panels as you like. There are several layers which you can use for the center of each panel, or you can use the base oval for trimming a photo to fit. Add photos and/or sentiments, or journaling to the front and back side of each oval as you prefer. The card’s height is 6″, but you may adjust the size according to your needs. You may even add lots of panels to create a mini album. The card folds flat for mailing, with a complete size of 4.5″ x 6″ . It stands alone for display.
Supplies Needed to Make the Oval Accordion Card
Please note: Some affiliate links may be used in this post. I am affiliated only with products that I use. When you purchase products using my affiliate links, it does not cost you any more, but I will share some commission. Thanks!
Digital Paper from Pazzles.
Medium Weight white Cardstock for printing digital papers
100#– 110# white cardstock for card base pieces
Colored Cardstock for oval layers
Electronic Cutter (I used Pazzles Vue)
SVG Cutting File from our Free Resource Library
Pop Dots if desired for layers
Art Glitter Glue Dries Clear Adhesive
Software Requirements
The SVG files are suitable for use with Make The Cut, Sure Cuts A Lot, Pazzles InVue software, Cricut Design Space, Brother Canvas Workspace, Scan N Cut, Inkscape, Silhouette Studio DE, Illustrator, CorelDraw, and any other software that will import SVG files. Also included is a PDF file containing assembly instructions.
Paper Choices
Decide how many panels you want for your card. Then select papers for any layers that you wish to use. Print any digital paper you plan to use for the rectangular frame on each panel. You can use printed papers, or solid. If you are using photos, trim them to the size of the largest oval in the file, or to any size that you prefer. There are several layers to choose from. You can use some of the panels for titles, sentiments or journaling. Select heavy cardstock for the base panels, as they will stand alone better, and be more sturdy for displaying. Use lighter weight cardstock for the oval layers. You do not want these to be too heavy to put unnecessary weight on the upper and lower hinges on the ovals. You may use pop dots to give more dimension to any of the layers.
Cutting Instructions
The cutting files include a single panel for the left side of the base card. The left and center panels are the same. Make multiples of the center shapes for as many extra panels that you need. The panel for the end of the right side of the card is different from the others, as it has no folding tab for the right side of the card. You need only one of these panels. This panel is rotated in the cutting file so that it will fit better on the cardstock for cutting. You will need an extra printed layer for the front of the card, if you plan to close it flat. Also consider cutting extra oval layers if you plan to use the back sides of the ovals.
Score Lines
The score lines for the side tabs are better created as shallow solid lines, as opposed to cut dashed lines. You can use a scoring tool, embossing tool, engraving tool, or the blade set to a low extension, and cut at a low cutting pressure. You do not want the blade to cut through, but rather to just scratch the surface so that the tabs fold more readily.
Basic panels for oval Accordion Card
Oval Accordion Card Assembly
It is easiest to decorate the base card pieces before folding. Use glue around the edges of the back side of each layer. Next glue the layers onto the base card. Make sure the rectanglular layer does not overlap the score lines.
Decorated Panels
After you have decorated the panels, fold the flaps. The panel on the left has the flap folded up with a valley fold. The center panel has the flap folded back with a mountain fold. If you have more panels, the folds will alternate. The panel on the right does not have a flap. Next glue the left edge of the center panel over the flap of the panel to its left. If you have additional panels, repeat this process. Glue the final panel over the flap of the panel to its left.
Panels Glued Together
Folding the Card
Use a bone folder to crease the panels in the direction of their folds. Between the first two panels there is a valley fold. Between the last two panels there is a mountain fold. Now, place glue on the tiny square tabs between the ovals and the outer frame. The oval on the left comes over the valley fold to meet the the oval to its right. Glue the tab to the back of the neighboring oval, and fold the tab with a mountain fold. The tab on the center oval goes behind the mountain fold of the base card to connect to the back side of the oval to its right. Make a valley fold on this tab. The ovals should end up touching each other. Hold the tabs in place until the glue dries.
Glue oval tab to neighboring oval.
Fold the ovals in the opposite direction of the folds in the base card. Then burnish creases.
Connecting Oval Tabs
Fold the card flat. The tabs at the top and bottom of each panel should fold naturally as you help the base card and ovals fold correctly.
Card Folded Flat
Burnish the folds so that they are creased well. Now you may decorate your card with additional embellishments if you would like to do so. I might add a 3D flower from my collection, depending on who I plan to give it to.
Oval Accordion Card completed
Love,
Julie, cuttercrafter.com
>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<
This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.
If you already have your password, enter the resource library here.
Why You Might Need a Brother Scan N Cut
Brother Scan N Cut
Unique Features of the Scan N Cut
Here are some reasons why you might need a Scan N Cut electronic cutter. It has a built in wide format scanner. The scanner allows it to cut around stamped or printed images. No computer or Internet connection is necessary. Scraps can be used efficiently. It can fill fonts with solid or patterned fills to be drawn or embossed. Free design software is available for download to your computer. You can use your SVG file collection with this machine.
Wide Format Scanner Built into the Scan N Cut
Do you need a wide format scanner? If you do, then the Brother Scan N Cut 2 might be for you. With it you can scan a full 12″x12″ image, save to a USB thumb drive in JPG format in up to 300 DPI resolution. Wide format scanners can be extremely expensive. This wide format scanning feature alone makes the purchase of a Brother Scan N Cut a worthy investment. The built in scanner in the Brother Scan N Cut machine allows you to scan a design into the machine, and then have the machine cut around the printed design. The machine knows exactly where your images are on the mat to create a perfect cut. This is a great option for scrapbookers who create layouts in up to 12″x 12″ size, as they can scan their completed pages and share them with others online or even have copies printed.
Cutting Scraps with the Background Scans
The background scanning feature is genius. You can put your different colored scraps down on the mat. Then do a background scan . Finally, place your cutting designs exactly where you want them to cut. There is no guessing about where the shapes will be cut. You can make use of even the tiniest of scraps without worrying about where to place the designs on the screen.
Cut Around Stamped or Printed Images
You can stamp an image with a rubber stamp, scan it into your Brother Scan N Cut, and the machine will cut around the stamped image. No additional software is necessary. This is a great option if you want to select the Direct Cut method on the machine to cut around the outside of the stamped shape. Quick and easy. You will need to play a bit more to master the machine’s more advanced Scan to Date option.
No Computer or Internet Necessary for Using the Scan N Cut
The Brother Scan N Cut can operate fully independent of a computer. There is with no need of expensive cartridges. With the addition of the optional wireless card, you can connect from the free Canvas software on your computer to your Brother Scan N Cut. This machine is an excellent option for those who do not have ready access to high speed Internet service. It can be operated without a computer, and without Internet service.
There are hundreds of cutting designs built in to the machine, ready to edit and cut. There are also hundreds of free cutting projects posted online at the Brother site that can be saved to a thumb drive. Then you can cut them on this machine. My grandchildren preferred this machine over all the others in my studio. I worked on my computer and cut to my Pazzles or Cricut Maker, and they were very content to cut their projects on my Scan N Cut without help. By the way, they are ages 11, 9, and 7.
Free Design Software
Canvas Workspace
The Brother Scan N Cut can use SVG files created in the free Canvas Workspace software, or any other software that provides an SVG file export. SVG files can be opened in the Canvas Workspace software and saved in FCM format, or it can be sent directly to the Brother Scan N Cut machine to cut, via the wireless connection. Or you can save your SVG and FCM cutting files on a USB thumb drive, and plug it directly into the machine’s USB port. The built in software allows you to load the design, edit it to the perfect size, and cut the design.
Drawing with Pens and Fills
Another unique feature of the Brother Scan N Cut is the option to draw text or a shape with a pen or embossing tool and fill it automatically with a solid fill or design. This can be done with software on other cutters, but this feature is actually built in to the Brother Scan N Cut machine.
SVG File Compatibility
The Brother Scan N Cut is compatible with third party software. Vector art programs such as Illustrator, CorelDraw, Inkscape, Sure Cuts A Lot, Make The Cut, Pazzles InVue, Silhouette Studio, Funtime Scrapbooking, and others that can be used to create SVG files that can be cut on this machine.
Amazing Cutting Pressure for Heavy Media
In addition to its unique features, the Brother Scan N Cut boasts cutting specifications that rival top-of-the-line cutters in the home crafting market place. At the same time, its price is comparable to entry level cutters. Its 1250 grams of cutting pressure is exceeded only by a couple of other more expensive cutters in the home crafting cutter marketplace. With this pressure, it can cut through most any media up to 1.5mm in thickness.
Hints to Get Started with the Scan N Cut
Protect your Mat
Since the Scan N Cut is a heavy duty cutter, it can cut straight through your cutting mat. The mats are expensive. So spare yourself some agony and expense by setting your cutting pressure to -1, and don’t change it. Change the blade depth instead.
After you order
Check this document while you wait for your machine to arrive. Find a home for it.
Go to the Brother site. Download all of the documents pertinent to the Scan N Cut. There is one chart in the manual that I referred to constantly. It includes suggested blade settings for a variety of different media. I printed a copy of it and attached it to my machine for quick reference.
Browse through the hundreds of free cutting projects at the Canvas Workspace site. Download the ones you like. There are new free projects posted there regularly.
Once your machine arrives, do some test cuts.
Go for it!
If you need a wide format scanner, an electronic cutter that does not require the use of a computer or the Internet, or a powerful craft cutting machine at an affordable price, the Brother Scan N Cut may be for you! Once you get your Scan N Cut, be sure to try cutting some of the projects included in our Free Resource Library.
Would you like to have some FREE SVG cutting files for a variety of projects?
Check them out in my FREE Resource Library.
>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<
This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.
If you already have your password, enter the resource library here.
Thanks!
Julie, cuttercrafter.com
Impossible Butterfly Popup Card
You can make this lovely Impossible Butterfly Popup Card with the SVG cutting file from the Free Resource Library. It will make a lovely gift for someone special. The card base is made from a single piece of heavy cardstock, and yet the center pops up in a seemingly impossible way! This special Impossible Card includes a dimensional butterfly, whose wings pop out from the card base. The card makes a lovely conversation piece when displayed on the mantle or coffee table.
Impossible Butterfly Popup Card
Supplies Needed to Make the Impossible Butterfly Popup Card
Please note: Some supplies may include my affiliate links. I am an affiliate only for products that I use. Your purchase from my links will not cost you any more, but they will help support my blog. Thanks!
Digital Paper from Pazzles.
Medium Weight Cardstock
1 sheet 110# cardstock
Strips of Double-Sided sticky tape 1″ wide
6”x6” grey square jpg file included with the cutting file.
Electronic Cutter (I used Pazzles Vue)
SVG Cutting File from our Free Resource Library
Pop Dots
Art Glitter Glue Dries Clear Adhesive
The Font used for this project is Aubrey Script
Printing Instructions
I used Digital Paper from Pazzles. But you may use printed papers of your choice.
Resize the digital paper to the following measurements, and print on medium-weight cardstock.
Printed Digital Papers
Light Pink paper is cut from Stripes resized to 8.5”x7”
Yellow pieces are cut from yellow paper resized to 8.5”x6”
Blue resize to 8.5″x5″
Dark pink resize 8.5″x3″
Print the 6”x6” grey square jpg file.
When printing, use the Best Quality setting on Plain Paper in your printer Preferences.
Print the sentiment on pink paper and cut around it using the piece for it in the SVG cutting file.
Printed Sentiment
SVG files are provided All in one file or in three separate files for your convenience. However, if using the All in one file, you do not need to use the separate files.
Cutting Pieces
Cut the File Pieces
First cut the file pieces with the black lines on 110# heavy cardstock using the chipboard setting. Next, score the red line without removing the mat from the machine. Do not move the cutting head. You may use a scoring tool, or cut the score line with a retracted blade and lower cutting pressure.
Cut Card Base
Folding Card Base
After you finish cutting and scoring the card base, remove it from the cutting mat. Then fold the center portion of the card towards the front, and use a bone folder on the crease.
Twist right side to back
Now, twist the right section of the card to the back, and press the side portions flat, allowing the center to pop up.
Twist right side to back
Make Glitter Paper
See detailed instructions for making Glitter Paper in a previous post. In this project I used 1″ wide double stick tape instead of a sheet of scor-tape.
Use double sided sticky tape over the entire printed grey piece that you printed. To use it, first remove the backing. Next, adhere the sticky strips to cover the grey paper. Then Remove protective layer off the front of the tape.
Cover the grey paper with double sided sticky tape strips.
Sprinkle the sticky tape with glitter. Next, brayer over the glitter. Now, rub the glitter with your finger. Finally, sprinkle off the excess glitter, and pour it back into the jar.
Glitter paper ready to cut.
Next you can cut the large and small grey butterfly pieces, as well as the sentiment mat from the glittered paper. Use your poker tool to remove small inside pieces that did not stick to the mat. See the resource document for information on cutter crafting tools in the Free Resource Library.
Cut Butterflies
Assembly of the Impossible Butterfly Popup Card
Now, your cut pieces are ready to assemble.
Cut pieces are ready to apply to the card.
Butterfly Assembly
Bend the butterfly wings forward. Glue only the center body part of the butterflies when assembling layers.
Next, glue body of the large lacy butterfly to the solid pink butterfly. Then glue the body of the pink butterfly to the striped mat. Finally, glue that mat to the blue mat, aligning the tops of the pieces to each other.
Assemble the butterfly layers.
Now you can glue the butterfly layers to the card base, aligning the tops of the design. The edge of the bottom layer should line up with the score line.
Glue the butterfly layers on the card.
Next, center yellow panels to the card base and glue in place.
Add decorative panels.
Tag Assembly
The larger tag and mat for the back side of the card is for writing your personal greeting. First, glue the yellow journaling piece to its mat. Then center the tag on the back side of the card with the edge flush against the fold line to give support for the butterfly popup. Now, glue in place. Finally, to finish the back side of the card, glue the striped panel to the back side of the butterfly.
Back side of the card.
Card Front Embellishments
Now you are ready to add the embellishments to the front of the card. First glue the long narrow rectangle to its mat. Center it on the front bottom part of card. Then glue in place.
Front panel
Now, add pop dots to the back of the sentiment, and place on the grey mat. Then glue the assembled sentiment at an angle on the left front side of the card over the decorative strip.
Add the Sentiment
Next, bend the wings of the small butterflies upward. Then glue the body of the smallest butterfly to the pink butterfly. Finally, glue the body of the pink butterfly to the bar on the front, over the open space.
Small Butterfly Embellishment
Finished Impossible Butterfly Card
Now you can display your finished card.
Finished Impossible Butterfly Popup Card
When it is folded flat, the card will fit in a 7″ square envelope for mailing.
The recipient of your card is sure to be encouraged by your lovely card.
Love,
Julie, cuttercrafter.com
>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<
This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.
If you already have your password, enter the resource library here.
How to make and use glitter paper for Patriotic Decorations
Now is a great time to make some patriotic decorations for your Independence Day celebrations.
Patriotic 3D floral centerpiece with DIY Glitter Paper
I saw some lovely glitter paper projects at a Stamp and Scrapbook convention, and I thought you might like to learn how to turn an ordinary piece of patterned paper into a sparkly paper. The glitter paper can then be used to create lovely 3D craft projects. This 3D flower, embellished with DIY glitter paper works perfectly for patriotic decorations for a variety of projects. Vinyl can then be used to add detail to the cut project.
Patriotic celebrations in the US call for Red, White and Blue decorations. Pazzles Craft Room has a nice set of digital papers, and among them are some papers in these colors. Take a look through their digital paper collection when you need some seasonal papers for your projects.
Supplies Needed to Make Glitter Paper
Please note: Some affiliate links may be used in this post. I am affiliated only with products that I use. When you purchase products using my affiliate links, it does not cost you any more, but I will share some commission. Thanks!
White Cardstock- 65# Recollections 8.5”x11”
Pazzles Americana Digital Paper design 8.5”x11”
Scor-Tape 6”x6” sheet double sided adhesive, acid free and heat resistant.
Transparent Micro Fine Glitter
Flower Shaping Tools – Large ball Embossing tool, foam pad
Designer Dries Clear Adhesive Glue
Black Vinyl
Pearl Sticker(s)
Red, White and Blue Ribbons
Tray, coffee filter or folded sheet of printer paper
Optional: Hair Clip, Flowers, Mug, Electric Candle, Card or Scrapbook page as you prefer.
How to Make Glitter Paper
Making Glitter Paper is easy with the correct supplies. First, print the paper you wish to use, or select a piece from your own paper collection. Then cut a selection from the paper that is a bit larger than the project that you wish to cut. Next cut a piece of scor-paper to fit the paper that you cut. Remove the backing from one side of the score tape, and stick it to the paper. Now place paper in a tray, coffee filter, or on a piece of printer paper, folded in half. Remove the protective coating of the adhesive sheet.
Sprinkle Micro fine glitter over the entire surface of the adhesive sheet. Brayer over the glitter to press it into the tape. Rub the glitter paper with your fingers to make it smooth and add bling from the oils in your fingers. Tap off the excessive glitter onto the tray or printer paper. Finally, pour all excess glitter back into the bottle from which it came.
You now have some custom, DIY glitter paper in exactly the right colors for your project.
Cut Your Project Pieces
Perform some test cuts for each part of the project. Cut the flower layers from printed glitter paper on your cutting machine, glitter side up, using the cutting file. The cutting file is FREE for Pazzles Craft Room members. The file is also availabe to purchase in SVG, AI, and WPC formats, if you are not a member.
Create a Vinyl “Press and Peel” Outline
Cut the black portions of the design from black vinyl, being careful not to cut through the backing. Weed out the vinyl pieces that will not be used on the finished piece. Place vinyl transfer tape over the weeded design, and use a brayer and squeegee to adhere the vinyl to the transfer tape. Lift the transfer tape with the design off of the backing. Carefully line up the black vinyl design over the cut and glittered flowers. Burnish the vinyl, and remove the transfer tape.
Shape the 3D Flower
Place the flower layers color side down on double layered foam mat. Roll the large tip of the embossing tool around the center of each flower layer, and press
the tool from the outside of each petal towards the center. Turn the flower on the foam mat to have the right side up. Roll the embossing tool around
the center of each flower. Press down firmly in the center to lift the petals on each layer. Curl the tip of each petal back, using the small end of a small paint brush.
Assemble the 3D Flower
Place glue on the center back of the smallest layer. Put the smallest layer in the center of the medium layer, offsetting the petals. Place glue on the center back of the medium layer. Place in the center of the large layer, offsetting the petals. Press firmly down through all layers to lift petals. Place a large or five small pearl stickers in the center of the top layer of the completed flower.
Embellish A Project
Embellish the project of your choice with your completed 3D flower. Not only does the 3D Flower make a nice ornament for a vase centerpiece, it can be hot-glued to a hair clip to create a lovely patriotic decoration for the hair. Add some colored ribbons for a festive look.
Patriotic Flower Hair Ornament
Or you can add the DIY Glittered 3D Flower to a jar to make a patriotic luminary to add to your patriotic decorations. Add an electric tea light to the jar, and glue the flower to the top of the jar. You can make a number of these to decorate and light up for an evening celebration.
Patriotic Decoration – Flower Topped Luminary
More Patriotic Decorations for Your Celebration
Exploding Box Centerpiece
You can make the title of this patriotic centerpiece shine with the addition of DIY Glitter Paper. I am sure you can think of lots of ways to make your patriotic celebrations sparkle by using some homemade glitter paper on your projects.
These Patriotic Decorations work well not only for Independence Day celebrations, but also for Memorial Day, and Veteran’s day. You can add to them for next year’s celebrations as well!
Please show off some of your Patriotic Decorations in our CutterCrafter Facebook group!
Thanks,
Julie
>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<
This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.
If you already have your password, enter the resource library here.
10 Cutter Maintenance Tips
Does your cutter need maintenance? Here are some cutter maintenance tips that will help you know when, where, why, and how to maintain your electronic cutter. Regular maintenance of your cutter will increase the accuracy of your cuts. And it will greatly reduce the frustration that bad cuts cause.
Cuts before and after cutter maintenance
Have your cuts been inaccurate, ragged, torn, or bunched up in places like this one?
Poor quality cut before maintenance.
And have these issues continued even after working through the usual trouble shooting steps? Reduce pressure, reduce blade depth, slow down the speed, try a new blade and new mat, and try using good paper? If these trouble shooting tips do not fix your cutting issues, and improve your cuts, then your cutter may need some maintenance.
Performing quick maintenance steps each cutting session will improve your cuts. Here are some important things to check before starting a major cutting session
Cutter Maintenance Tip#1: Machine Setup
Is your machine sitting on a firm surface with plenty of unimpeded space in front of and behind the machine? If not, be sure to see this post about setting up your machine.
Cutter Maintenance Tip#2: Connections
Securely plug in all cords. Is the power cord plugged in to a surge protector? Make sure that cord is well-connected to the power box, and the other end is plugged in to the machine. Is your USB cable connected securely on each end? If using Bluetooth, is it working properly? If not, turn off your machine, unplug your bluetooth radio or disconnect it. Then plug the bluetooth radio or reconnect it and turn on your machine. Make sure that your bluetooth is properly paired with your machine by consulting information provided by the distributor of your machine via Customer Support.
Cutter Maintenance Tip#3: Clean Surfaces
Did you wipe down the main surface of the machine? Inspect the front edge of the machine and back edge of the machine where the mat comes out to make sure there is no adhesive residue build-up. Wipe it down with an oil-free wipe. If the movement of the mat in and out of the machine is hindered by sticky residue on these surfaces, the cuts will not be accurate. Also be sure to wipe down the front and back side of the mat. Use alcohol free wipes on the sticky surface of your mat to remove all dust and bits of paper and other media that may accumulate there. Let the mat dry completely before use.
Cutter Maintenance Tip#4: Blade Holder
Is there debris inside of the blade holder? Take the blade out of the blade holder. Next check inside to make sure there is nothing inside of the blade holder that might prevent the blade from swiveling while cutting. Inspect the blade tip under a magnifying glass or microscope. Is the tip of the blade chipped or broken? If so, replace the blade with a new one.
Cutter Maintenance Tip#5: Cutting Head, Wheels, and Rail
Is there dust or debris on the rail on which the wheels behind the head sit? Use an alcohol swab to wipe down the rail. Do not get alcohol on the belt that moves behind the raiIs. Can you see debris on the wheels behind the cutter head? Wipe down the wheels. Manually move the head to the other side, and watch for any debris on any part of the wheels as they track on the rail.
Cutter Maintenance Tip#6: Clean Environment
Is your environment free of dust and excess humidity? Keep pets out of the room, and do not cut outside where sand, wind, or moisture could cause damage to the machine components. Wipe down your mat with alcohol-free wipes before each cut.
Cutter Maintenance Tip#7: Cutting Strip
Inspect the cutting strip that is directly below the blade tip, and runs all the way across the width of the cutting area. Do you have some adhesive coming up? Is there an accumulation of dust or debris on the cutting strip ? Wipe down the cutting strip to remove all dirt and debris. Replace the cutting strip and tape if necessary according to manufacturer’s instructions.
Cutter Maintenance Tip#8: Bar and Rollers
Wipe down the bar behind the cutting strip to remove dust, rust, and debris. Use a damp alcohol swab to wipe it down. Check the rollers on the bar to make sure they are clean. You may manually rotate the roller bar forward or backward. Some cutters, such as Pazzles Inspiration and Vue have removable rollers. Remove each one and wipe to remove dust and particles. Some cutters have pressure levers that you raise and lower manually. Make sure that the positions of the rollers are directly over the grit rollers.
Cutter Maintenance Tip#9: Grit Rollers
Most importantly, check your grit rollers to make sure there are no tiny pieces of tape, paper, vinyl or other debris stuck on the grit roller.
Debris on Grit Roller
Directly below the roller bar running across the front of the cutter are grit rollers. The rough surface of the grit rollers, working in conjunction with the rubber pressure rollers just above them, are responsible for pulling the mat in and out of the machine. If the grit rollers cannot grab the mat firmly to move the mat, then the cuts will not be made in the correct locations. The machine can miss a step, and this can cause many tears and bad cuts.
Removing Debris from Grit Rollers
Debris on the grit rollers can be very difficult to remove. This is especially true if there is any adhesive built up on the grit rollers. Use some tweezers with a sharp point to grab any tiny pieces stuck on the grit rollers. Manually move the bar a little bit at a time. This will ensure that all bits of paper, etc. are removed. You may need to use alcohol on a Q-tip, cotton swab or Chalking Easy Tool to loosen any adhesive on the grit rollers.
A sharp vinyl pick tool for weeding may also be used to help remove debris from a grit roller.
For me, none of the previous tips resolved the cutting issues shown in the first photo of this post. But cleaning the grit rollers as described in Cutter maintenance Tip#9 resulted in a lovely cut of the same file. Isn’t it amazing what difference that cleaning the grit rollers can make in the quality of the cuts?
Clean cut after cleaning grit rollers.asdfas
Cutter Maintenance Tip#10: Prevention
Prevent adhesive build-up on the grit rollers. When you resurface your mats, be sure not to get any adhesive on edges of the mat where the wheels make contact with it. Also, avoid the use of tape along the mat edges. It is extremely difficult to remove tape from the grit rollers. This is where “An ounce of prevention is worth a pound of cure.”
Take a few seconds before starting your cutting project to review these cutter maintenance tips. They will save you a lot of frustration and wasted media. Your cuts will be more perfect, and you can reduce your overall project time.
Would you like to have a FREE Snowflake SVG cutting file to use as a cutting test?
Snowflake design .
You can download the FREE Snowflake SVG cutting file as well as my other FREE SVG projects from my FREE Resource Library.
>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<
This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.
If you already have your password, enter the resource library here.
Thanks!
Julie, cuttercrafter.com
How to Use SVG Files with Scan N Cut
Learning how to use SVG files with Scan N Cut is important. Not all SVG files work well with Scan N Cut. In this tutorial you will learn how to make sure that your SVG file will work well with your Scan N Cut. ScanNCut SVG files need to be no larger than 11.75″ x 11.75″ using the standard sized mat, or 11.75″ x 23.75″ using the long mat. The DPI size also needs to be correct. Make sure that the ScanNCut SVG file has a minimum number of nodes. This tutorial will address all of these issues.
Scan N Cut
How was the SVG file Created?
SVG files may be created in any number of software programs. Some software allows the designer to add many different “pages” of file pieces on a single screen. This is fine if cutting from that software directly to a supported cutter. That software will allow you to select the specific portions of the designs to be cut in a given pass. SVG files of this type will work in many programs for many different cutters. However, any SVG file imported into the Brother Canvas Workspace software will be resized to fit the mat on the screen. When all pieces of the file are selected, and the width or length of the selection is greater than the screen mat size, the pieces will be resized to fit. So all of your design pieces may shrink to a very tiny size in the Brother Canvas Workspace or on the LED screen of your Scan N Cut.
FREE Rose SVG Cutting File
There is a Free Large 3D Rose cutting file in SVG format in my Free Resource Library for you to use as you work through this tutorial. When it is cut and assembled, this rose has a width of about 7″.
Large 3D Rose SVG Project
The cutting pieces for this project measure over 17.5″ wide when selected in their original size. The largest petals measure 3.45″ wide.
Original Size of Large Rose Cutting File – 17.5″ wide
But when you import this same design into Brother Canvas Workspace, you will receive a message that the design was resized to fit the Canvas Workspace.
Warning Message in Brother Canvas Workspace about Size
The resulting imported design in Brother Canvas Workspace was resized to be 11.75″ x 11.75″ and the largest petal measured 2.03″ wide. This size is about 58% smaller than the original. The final assembled flower would measure about 4.12″ wide. Now if this adjusted size is OK with you, then you can go ahead and cut the project to make the smaller rose.
Large Rose SVG file was resized in Canvas Workspace
Vendor Remedies for ScanNCut SVG Files
Some software vendors are aware of this issue, and save their larger SVG projects into multiple SVG files with a maximum width so that they will work with all software, including Scan N Cut. They will add all of the project SVG files to a single folder, and zip them up for a single download. You will need to unzip the folder once you have saved it to your computer, by clicking on the zipped folder, and selecting Extract All. Then you will be able to import one SVG file at a time to either Canvas Workspace or directly to your Scan N Cut via the Bluetooth connection, or via a thumb drive plugged in to the USB port on the machine.
How to Make Size Adjustments for ScanNCut SVG Files
If you have determined that you need to retain the sizing of the original file, how do you make the necessary size adjustments in the file so that it will work with the Scan N Cut? One option is to contact the original designer of the file, and ask them to limit the sizing of their SVG files to a width of 11.75″. However, that is not always practical for you or for the original designer. You can learn to make the necessary adjustments in the file so that it will work on your machine.
The best option is for you to use a third party software for making changes in your SVG file. Software that exports designs with the sizing of the original design are the free Inkscape , Make The Cut, or Sure Cuts A Lot (using the 96 DPI export option or Save as FCM). SCAL is the best option for MAC users.
The Large 3D Rose file is a good place for you to start. Select one of the above software programs to use for editing your SVG files. Plan to stick with it for all of your editing needs. You will need to learn how to use it for many different purposes. Each has its own learning curve. See my video tutorial covering use of each of these three programs for making the small changes that this file needs.
How to Reduce the Number of Nodes for a ScanNCut SVG File
Whenever you change file formats for a cutting file, it is possible that extra nodes will be added to the design. If a design has too many nodes, or construction points, it may not load into Canvas Workspace or the Scan N Cut. It is therefore important to reduce the number of nodes in the design before exporting as SVG. In Make the Cut, you can use Ctrl+Shift + X to view path detail.
Reducing the Node Count in Make The Cut
View Path Detail in Make The Cut
In this file there are only a total of 434 points, and 182 Nodes, as indicated on the top line of the window. This number of nodes is not a problem for Scan N Cut. Some files with lots of tiny detail can have upwards of 30,000 nodes. That would be too many. To reduce the number of nodes in Make The Cut, select all (Ctrl+A), Join (Ctrl+J), Auto Simplify Paths (Ctrl+Shift+Z). The number of nodes will be significantly lower if there are too many nodes.
Reduce the Node Count in Inkscape
If you are using Inkscape, and your SVG file has too many nodes, select all (Ctrl+A) and Simplify (Ctrl+L) as many times as needed to get rid of excess nodes, a few at a time. This file does not need it. You only need to reduce nodes or simplify paths if you get an error when trying to load your SVG file into Canvas Workspace or into the Scan N Cut machine.
Warning when attempting to transfer a design with too many nodes to Scan N Cut.
Reduce the Node Count Using Sure Cuts A Lot
To reduce the number of nodes in a file if you are using Sure Cuts A Lot, go to the Path menu at the top of the screen, and select Simplify. A window will open allowing you to see the nodes and reduce the number of nodes if there are too many. This design does not have too many nodes, so simplifying would actually add nodes as shown in the image below.
Use the Path Simplify tool to view the number and to reduce them if necessary.
Import your ScanNCut SVG Files into Scan N Cut Canvas Workspace or into the Machine
Once you have edited the SVG files to have its objects fit on a single design page in the software of your choice no wider than 11.75″, reduced the number of nodes if necessary, and exported the files as SVG for FCM using the proper DPI settings, then you are ready to transfer your files to your Scan N Cut machine for cutting. You can copy the files to a thumb drive, and plug them in to the machine’s USB port, or import them into Canvas Workspace to Transfer to your Scan N Cut.
Cut the pieces for your ScanNCut SVG Large 3D Rose, and you are ready to assemble your flower.
Large 3D Rose SVG Cutting File
You can get the FREE cutting file for this project as well as additional SVG projects in my FREE Resource Library.
>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<
This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.
If you already have your password, enter the resource library here.
Thanks!
Julie
cuttercrafter.com
Easy DIY Tool Organizer
You can make an Easy DIY Tool Organizer to keep your most used tools for cutter crafting handy on your desk next to your cutter. This is a great first project to try after you have set up your cutter and finished performing some test cuts.
Easy-DIY-Tool-Organizer
You will find the cutting files for this project in the Free Resource Library. There is also a special file in the Free Resource Library with a list of Five Must-Have Cutter Crafting Tools which you likely have around your home already. This Easy DIY Tool Organizer will provide a place to keep these important tools so that they don’t get lost, and they remain handy while you cut and craft!
Supplies Needed to Make the Easy DIY Tool Organizer
Two sheets of heavy 12″x12″ cardstock
Glue that dries quickly.
Cutting File from the Free Resource Library
Five Must-Have Cutter Crafting Tools
Assembly Instructions for the Easy DIY Tool Organizer
To make this Easy DIY Tool Organizer, use the heaviest cardstock that you have that your cutter can cut. Be sure to do a test cut to determine the best pressure and blade extension for the cardstock that you have chosen. Since the cardstock is heavy, it is important that you use a brayer or other similar implement to press the cardstock firmly on the cutting mat. Heavy pressures can cause the paper to move around the cutting mat during cutting if the cutting mat is not sticky enough.
Adhere cardstock firmly to the cutting mat.
Cutting the Easy DIY Tool Organizer
Download the zipped cutting file from the Free Resource Library and Extract All. Open your cutting software and import the appropriate file. Most cutter software can use the SVG file, but there are other formats included for those who need them. Follow the instructions for using SVG files with your cutter. If you are using Cricut Design Space, see How to Use SVG Files in Cricut Design Space. If you are using Scan N Cut, open the FCM files. There are two files for Scan n Cut users. See also How to Use SVG Files with Scan N Cut. Open the MTC file to cut the design from Make The Cut. Or see this video tutorial on how to find and use SVG files with Make The Cut. Open the PVGC file to use with Pazzles InVue software. If you are using a Silhouette or Cameo machine, open the Studio2 file. If you are using Sure Cuts A Lot, open the SCAL4 file.
Once you have the file open in your software, send it to cut. There are two design sections, represented by two different line and fill colors. Select one portion of the design and cut. Remove the cut pieces for that cut. This piece may require a 24″ long mat. However, if you place your 12″x12″ paper strategically on your cutting mat, you may get it all to cut on the standard cutting mat.
Cutting file part 1 pieces.
Now you are ready to cut the pieces for the second part of the Easy DIY Tool Organizer.
Second part of the box.
Fold and Glue First Box
Fold on all of the score lines using mountain folds, folding towards the back of the pieces, for the first part of the Easy DIY Tool Organizer.
Fold towards the back on all score lines on this piece.
Put glue on the outside of each of the glue tabs for the main box. Fold up the side pieces, and hold the tabs in place until the glue is dry to form a box.
Glue the tabs to the end pieces of the box
Add glue to the outsides of the tabs on the dividers, and place inside of the box, about 3/4″ from the ends of the box, or wherever you wish to place them to fit your tools.
Glue the dividers inside of the box.
Fold and Glue Second Box
Fold on all of the score lines using mountain folds, folding towards the back of the main box piece. The long narrow strip has folds that alternate between mountain and valley folds, as shown in this photo. From left to right the folds are as follows: valley, mountain, mountain, valley, valley, mountain. The partitions on the left side of this box are larger than those on the right.
Fold tabs for Box 2 as shown.
Glue the tabs on the main box piece to the end pieces. Hold in position until the glue is dry, forming a box.
Glue the second box together.
For the inside partition piece of this box, place glue on the two flat sections where they will line up against the front and back of the box. The small tabs need glue as well, where they attach to the main box. Make sure you have the narrower compartments on the right side. Place the right side into the box, lining up the tab with the front right corner of the box. Make sure the the sides of the compartments are straight. Then hold in position until the glue is dry.
Partitions inside of the second box.
Assemble the Easy DIY Tool Organizer
You may use the two boxes separately, one on either side of your cutter. I like to use strong double stick tape to adhere the boxes securely to the cutter end caps.
Use a box on either end of your cutter if you like.
But my current setup makes it easier to access my important cutting tools by having them both on one side of my cutter. To make the two boxes into a single unit, glue the back of the smaller box to the front of the taller box. Be sure to line up the bottoms of both boxes against your desktop.
Glue the two boxes together to make a single Easy DIY Tool Organizer
Now you can fill your Easy DIY Tool Organizer with the tools you use the most in your crafting. Be sure to see the special file in the Free Resource Library with a list of Five Must-Have Cutter Crafting Tools which you likely have around your home already. This Easy DIY Tool Organizer will help you to organize those Must-Have cutter crafting tools.
Place your most used tools in the Easy DIY Tool Organizer
Decorate Your Easy DIY Tool Organizer
I used one of the large peony flowers that I made for my Lovely Peony Basket. You can decorate yours with any number of beautiful ornaments from your supplies.
My Easy DIY Tool Organizer on my desk.
Completed Project
Here is my finished Easy DIY Tool Organizer. I would love to see yours! What are you going to put in it?
Julie, cuttercrafter.com
Would you like to see some more of my FREE SVG projects? Check them out in my FREE Resource Library.
>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<
This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.
If you already have your password, enter the resource library here.
