decoration decoration decoration
decoration
leaf leaf leaf leaf leaf
decoration decoration

Pazzles Inspiration Vue Cutter Review

Pazzles Inspiration Vue may be the electronic cutter you need. It ranks among the top electronic cutters. The Vue is a powerful, but simple to use machine. You can cut many different types of materials with it. And with optional accessories, you can also use the Pazzles Inspiration Vue to cut, draw, engrave, emboss, pierce, and distress many media types. The Pazzles Inspiration Vue is the choice of beginner and well as professional crafters. This article reviews the features of this amazing machine to help you decide if this is a good choice for your crafting needs.

Inspiration- Vue Print and Cut

Note: I may have used some affiliate links in this review. I am affiliated only with products that I use. When you purchase products using my affiliate links, it does not cost you any more, and the tiny commission that I get contributes towards the costs for maintaining my blog. Thanks for your support!

What Do You Want to Cut?

Cutting Vinyl with the Pazzles Inspiration Vue

The Pazzles Inspiration Vue cuts vinyl of all types, whether the vinyl is repositionable wall vinyl, permanent outdoor vinyl, heat transfer vinyl, vinyl window cling, Stencil Vinyl,  Glitter or Flocked vinyl or other types. It is recommended that you cut your vinyl on either the 12″ mat or the 24″ mat. Reserving a standard cutting blade for cutting vinyl ensures that you will always get smooth cuts with for your vinyl projects.

Regal Split Monogram

Split Regal Monogram on a Ceramic Tile

You can make wonderful gift items such as the customized tile above using your Pazzles Inspiration Vue electronic cutter. The design for the shirt below was a special request from my husband. The Pazzles InVue software that ships with the machine,  allowed me to create the cutting design from an actual photo of my husband fishing.

Pazzles Inspiration Vue

Glittered Heat Transfer Vinly project

Cutting Heavy Cardstock with the Pazzles Inspiration Vue

Entry level cutters do not have sufficient cutting pressure to allow users to cut heavy media. The Pazzles Inspiration Vue boasts of up to 1000 grams of down pressure, making it rank among the top home crafting cutters. It can cut media that is up to 2mm thick. So it can cut even tough chipboard. If you love to cut 3D projects from heavier media, you will need a more powerful machine. This machine boasts of three times the cutting pressure of the legacy Cricut machines as well as the Cricut Explore models. And it has about 4 times the cutting pressure of Silhouette and Craft Robo machines. The print and cut embellishments used on this card were all created using the Pazzles Inspiration Vue and its InVue software.

 

Pazzles Inspiration Vue

Fall pop-up Card

3D boxes such as the Trailer Gift Box below are much more stable when cut from heavy cardstock.

 

Pazzles Inspiration Vue

3D cutting projects

Here is another project that required heavy cardstock. If you love making sturdy 3D projects, you will be happy if you have a cutter that can handle cutting the required heavy media.

Pazzles Inspiration Vue

Flower Mailbox

Projects like this Snow Globe Box Card last a lot longer on display when its pieces are cut from heavier cardstock. Pazzles Inspiration Vue cuts these so efficiently! The intricate snowflake detail cut beautifully on this machine.

Pazzles Inspiration Vue

Snow Globe Box Card

Engraving Metal with the Pazzles Inspiration Vue

You can use Pazzles optional Diamond Tip engraving tool to engrave on metal. I recently engraved on a dog tag for our puppy. The tallest letter was .057″ and the smallest letter was  .06″ tall. The entire tag was only 1.5″ wide. I was able to fit four rows of text on the back of the tag with our puppy’s name, address and phone number. Here is the front of the tag. (I blurred the phone number.) You can cut thin aluminum metal with the blade.

Pazzles Inspiration Vue

Engraving On Metal

 

Cutting and Piercing Delicate Designs in Vellum with the Pazzles Inspiration Vue

You can also cut very fine and delicate media such as vellum. I used Pazzles optional Piercing and Embossing tools on vellum to create this popup butterfly anniversary card.

Pazzles InVue Cutter

Pierced, embossed, and cut Vellum popup butterfly

 

Cutting Fabric with the Pazzles Inspiration Vue

Cutting fabric with this machine is great. I was amazed at how nicely my Vue cut the doily and the flowers out of fabric for this Easter Bonnet. It is good to reserve a blade dedicated to cutting fabric, since paper can dull blades quite quickly.

Pazzles Inspiration Vue

Fabric Doily Easter Bonnet with Fabric flowers

Cutting Wood with the Pazzles Inspiration Vue

Yes! This machine cuts thin balsa wood or basswood up to 2mm thick. Here is a Captain’s Wheel design that I cut. Covering the back of the piece of wood with blue painter’s tape before cutting keeps the thin wood from splitting during the cut and while lifting from a very sticky mat.

Pazzles Inspiration Vue

Captain’s Wheel cut from thin wood, with pen writing.

Making 3D Flowers with the Pazzles Inspiration Vue

If you love making 3D paper flowers as I do, you will be happy to know that this machine cuts lots of different types of paper petals for making beautiful flowers. This bouquet includes some vellum flowers, some made from printed scrapbook paper,  some from medium weight cardstock, and some from heavy cardstock.

Pazzles Inspiration Vue

Musical Paper Flowers

Cutting Rubber Stamps

You can create your own custom rubber stamp designs using the Pazzles InVue software that ships with the Pazzles inspiration Vue. Then you can cut the rubber using the Pazzles Inspiration Vue. I had an idea for a musical stamp, so I created the design, and let my Pazzles Inspiration Vue  machine cut it out for me.

Pazzles Inspiration Vue

Homemade rubber stamp design.

Cutting Clay, Fondant, Gum Paste and Frosting Papers using the Pazzles Inspiration Vue

You can use Pazzles optional Cake Accessories Kit for cutting clay, fondant, gum paste, and frosting papers. Here is a project I made using thinly rolled Sculpey clay.

Pazzles Inspiration Vue

Clay Cornucopia Fall Decor

Cutting Scrapbook Page Overlays

Scrapbook pages are fun to make using the Pazzles InVue software and cutting with Pazzles Inspiration Vue. This machine will cut a full 12″ wide border or scrapbook page. It is not limited to an 11.5″ cutting width as some cutters are. Here is a scrapbook calendar page that I created. Notice the detail of the embellishments.

Pazzles Inspiration Vue

December Calendar page with fancy embellishments and 3D snowflake flower.

Rhinestone Templates

Designing templates for use with rhinestone designs can be done using the Pazzles InVue software that ships with the Pazzles Inspiration Vue cutter. You can turn any design or test into a rhinestone template design. Then you can cut your template out of rubber designed for cutting rhinestone templates using your Vue. Here is my first rhinestone project.

Cutting Around Printed Images

Before I received my Pazzles Inspiration Vue, I was never happy with the cutting around printed images with my other machines. You will love how the Pazzles Inspiration Vue automatically finds the registration marks, and cuts perfectly around printed images that are up to 8.5″ wide. This project would have been extremely difficult to cut and assemble if I had cut each tiny element separately. Instead, I chose a number of appropriate designs from the generous Image library available in the Pazzles Craft Room, and printed the shapes. Then I had my Vue cut around the printed images. It did a great job!

Pazzles Inspiration Vue

Teacher’s Cascade Card with print and cut Embellishments

You can see more of my Pazzles creations here .

What is your Cutting Skill Level?

If you are a novice cutter user, you will appreciate how easy the Pazzles Inspiration Vue cutter is to learn to use. With the great support offered by Pazzles to its customers through the Pazzles Craft Room, you can learn to start using your Vue to make amazing projects right away. The Pazzles Craft Room has hundreds of projects like the above, ready for you to download, cut, and assemble. The downloaded projects are yours to keep, even after your membership expires. And their Angel policy allows you to use the designs commercially. You can get almost all of the above projects for free as a member of the Pazzles Craft Room.

Ease of Use

The click style blade holder in the Pazzles Inspiration Vue makes setting blade depths easy. The software tells you where to set the blade for the media type that you have selected to cut. The blade holder and blade are the same ones that the Deep Cut blade holder and blades that legacy Cricut machines used. The blades are easy to insert and remove.

The machine automatically loads your mat. The optical reader sets the starting point at the same place every time. The optical reader also makes cutting around printed images so much easier!

More Advanced Users

You will love the flexibility you have in using the Pazzles InVue software. It has all of the basic functions with which you are familiar from other cutting software. But it also has lots of advanced design and editing functions. Some of these advanced features are not available even in the most expensive professional design software programs. Pazzles developed their InVue software with all the advanced design features that its staff and professional users were familiar with, and used to using.

The amazing thing about this software is that it is provided for FREE with the purchase the the Pazzles Inspiration Vue. And it is available for a VERY low price for those who wish to purchase it separately and use as third party software with other cutters. This software, combined with the advanced cutting technology in the machines, means that you most likely will not outgrow its functioning for your crafting purposes.

What is your Price Point?

Some people like to start their cutting adventure with a very inexpensive machine. Then they start saving their money, and plan to purchase a better machine when they outgrow the features of that machine. Others prefer to get the best machine they can get, so that they won’t be outgrowing its features any time soon. Pazzles Inspiration Vue is one of those machines that meets your growing cutting needs, without a need to upgrade to bigger and better machines later on.

Purchase options

There are several shopping options, making your purchase of the Pazzles Inspiration Vue cutter affordable. You can check out those options here.  If you wish to  purchase the machine outright, you will get the best price by first joining the Pazzles Craft Room for one month. While a member, you will receive a 15% discount on all Pazzles purchases. So you can get a 15% discount on your machine, and all the optional accessories you need. I save on shipping by purchasing all that I think I might need for a year. I  like to keep three good mats and three extra blades on hand at all times.

With your outright purchase, you will receive several months of free membership in the Pazzles Craft Room. Be sure to take advantage of that time to view all of the training videos in the video library. These will help you get a great start in using your new machine. Also, be sure to  download all of the cutting files and projects that you can get while you are a member. You can download up to 400 files per month, if you are diligent to download 40 files every 70 hours. These are yours to keep. While you are a Pazzles Craft Room Member, all downloads are FREE!

If you find that you love all the new projects that are regularly posted, you may decide that you want to maintain your Pazzles Craft Room membership. I really like all of the wonderful projects that they offer so much  that I decided to keep my membership going. The best price for me turned out to be purchasing a machine for $99 with a two year commitment to the Pazzles Craft Room. Another similar option is to purchase a machine for $199 with a one year commitment to the Pazzles Craft Room.

System Requirements

Pazzles Inspiration Vue works on both Windows 7, 8, and 10, and on Mac: OS X 10.9.X & 10.10.X.. It needs a USB2 connection directly to your computer. The InVue software also works on these machines. You will need software to cut to the Vue. You can use Pazzles InVue software or you may use Sure Cuts A Lot.  If you have Pazzles Inspiration Studio Pro 1014, you can use it to cut to the Vue. However, that software is no longer available for sale.

You do Not need high speed internet in order to use your Pazzles Inspiration Vue. Connect to the Internet to update your firmware and software one time after receiving your Vue. You can disconnect your Vue from your computer after making a cut. Then you can repeat that exact same cut with the same settings as many times as you like by pressing the Repeat button on the machine. When you need to make a lot of the same project, this is a real handy feature to have.

Pazzles Inspiration Vue Specifications

This cutter ships with the machine, USB cable, power cord, and converter box, blade, blade holder, and a print and cut mat. The machine will cut up to 1000 grams of pressure using settings of 1-50. You have 5 speeds from which to choose. The click blade holder has 11 different blade depth settings. Maximum cutting width is 12″. Cutting length is 12″ with the standard mat, and 24″ with the 24″ mat. The machine weighs 11.2 pounds, is 22″ wide x 6.5″ tall x 11″ deep. Its roller bar has two permanent pressure rollers, and four more rollers that are removable when cutting thicker media.

There is an accessory tray on top of the machine as well as three slots for additional tools. A support tray for the mat is built in to the front of the machine. You slide it out when using the machine. Then push it in when done.

Pazzles InVue Software Overvue

Cutter Software

Pazzles InVue Software

The InVue software  ships without additional cost to you with your purchase of the machine. It has many outstanding features. For that reason, we will touch only on the highlights. The software has special features not only for cutting, but also for drawing, piercing, embossing, engraving, distressing,  and converting to rhinestone designs. My favorite tools are the replace with a line, and replace with an arc.

The software will import and export SVG files. It will also import and export WPC  files. The image gallery connects to your online account with Pazzles. This allows you to download all new files easily. The software automatically stores these downloaded files in the correct topical file folders on your computer. Downloading files from the online library requires an Internet connection. But once they are saved to your computer, no internet connection is necessary for using them.

Software Pros

There are a variety of welding options in the software. One that is unusual to see is the WYSIWYG weld function. This allows you to arrange design pieces as you wish to see them. Then you use WYSIWYG Weld to get rid of all overlapping lines instantly. It has a nice inline/outline feature. It also has a nice Duplicate feature that lets you fill your page with the selected images.

The software will also convert images to cutting lines. There is a nice Fit text to path feature, which allows you to select any path for the text to follow. I love the Vertical/Horizontal tool, and the corner rounder features as well.

Text

The software will access any fonts installed in your computer’s system fonts folder. It will also access single stroke fonts that you have installed. The software has a very nice text preview window. This allows you to type in text and preview how it looks with any of your installed fonts. I love being able to see the text in  different fonts in a large size before I select  one. Once you have added your text to the layout, you have many options for spacing and kerning. Thickening fonts is easy in this software. Creating mats for  text is also easy. So you can make some lovely word art quickly and easily with this software.

Software Cons

Features that I miss in the Pazzles InVue software are freehand draw, fit object to path,  and  blackout shape. I miss the scissors cuts we had in Inspiration Studio Pro 2010, and the Create a Font option. This software is missing the word envelopes, simplify paths, and smooth small angle tools.

I go back to Make The Cut to use its better tracing options, its Conical Warp, and Texture Snapshot features. The MTC measuring tool and Lattice functions are some tools that I miss as well. Thin paths, Fuse and Weld and the Tiler functions are also features that I still go back to Make The Cut to use.

I go to Sure Cuts A Lot to make instant Knockout Text. We can do this using InVue software, but it takes a few more steps. Viewing and using alternate glyphs in  the private use area of fonts is another feature of Sure Cuts A Lot that I use on occasion. I go to CorelDraw to use the envelope for fitting text to a shape and for creating True Type fonts. CorelDraw and Illustrator have useful batch conversion utilities that come in handy from time to time. Sure Cuts A Lot does a batch convert for Brother FCM files. Pazzles InVue software does not have any batch conversion features.

The nice thing about the Pazzles InVue software is that even if you go to other software to use certain features, you simply export the files as SVG, import into InVue, and you are ready to cut. You get the best of all of the software choices this way.

Conclusion

Now you have an idea of some of the great things that the Pazzles Inspiration Vue can do for you. You need to figure out what your specific needs are. I have 14 different cutters in my collection. Each one has its own special purpose. I select the one that will work the best for the project on which I am working . You need to determine if the Pazzles Inspiration Vue or another machine meets those needs better. Study your options. What do you like to do the most? Get the best machine that you are able to afford that will work the best for your purposes. So the most important thing is for you to use what you have until you can get something better. You won’t really know exactly what you need until you start using what you have!

Free Thankful For You Tag SVG Cutting File

I have created a new cutting file for you using my Pazzles InVue Software, and I cut it on my Pazzles Inspiration Vue cutter. But you can use the FREE SVG cutting file with your own software and cutter. You can get the FREE Thankful For You  Tag  SVG cutting file in my FREE Resource Library. See the link at the bottom of the page.

 

Pazzles Inspiration Vue

Thankful For You Tag

 

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

Love,

Julie, cuttercrafter.com

How to Make an All-Occasion Tri-level Popup Card

Create the Tri-Level Popup Card

In this post, you will learn how to make an All-Occasion Tri-level Popup Card. The FREE SVG file for this card is available in the free Resource Library.

 

Tri-Level Popup Card

Tri-Level Popup Card ready for decorations

Supplies Needed for the Tri-Level Popup Card 

Please note: Some supplies may include my affiliate links. I am an affiliate only for products that I use. Your purchase from my links will not cost you any more, but they will help support my blog. Thanks!

Free SVG file for the Tri-Level Popup Card

100# white cardstock for popup card

81# text weight Stardream Quartz metallic paper for small Magnolia Flower

81lb Text Fairway Green  Metallics paper for inside card mats.

80lb Text Botanic Green Curious Metallics paper for Small Magnolia Flower leaves.

Dark green cardstock for card Backing

Decorative sentiment for outside card: Heartfelt Love Paper Collection by Heartfelt Creations

Small dogwood Flowers – Free SVG cutting files from CutterCrafter.com

Dries Clear Art Glitter Glue: Heartfelt Creations

Pearl Stickers

Transparent Micro Fine Glitter

Cut out the Card, Card Backing, and Mats for Inside Overlays

The FREE SVG cutting file for this card may be imported into the software used with your electronic cutter. You may resize the project once you have it imported. I resized the main card backing to 6″x 12″. The popup portion of the design measures  5.5″x11″. The finished card measures 6″x6″ when closed. Cut the black lines first. Without removing the mat from the machine or moving the cutting head, change from the blade to an embossing tool, or set the blade depth and cutting pressure to low settings.

Next, select the red and blue lines and score them. Now cut the light green pieces from the paper that you want to use as mats over the popup card. Cut the dark green lines from the card stock you wish to use for the card backing. Cut any pieces that you wish to use to decorate the inside and outside of the card.

Tri-Level Popup Card

Cutting pieces for the Tri-Level Popup Card

Folding the Popup Card

Pinch the center fold line of the popup card from the back side to create a valley fold. Nudge all of the popup pillars up in the opposite direction of the center fold.

Tri-Level Popup Card

First Folds, Center sides of popup card.

Before folding the remaining parts of the popup card, glue the mat pieces in place. It will help to keep the cut pieces on your cutting mat so that you can see where the pieces go on the card. Remove one piece at a time, add some glue on the back side around the edges of the piece, and place on the card. Repeat with each mat piece until all pieces are in their proper positions.

Tri-Level Popup Card

Mat Pieces glued in Place.

From the back side of the card, pinch on the valley folds at the top and bottom of each popup pillar. Then pinch from the front side on the mountain fold on each pillar. Carefully fold the card closed all the way.

Tri-Level Popup Card

Closed Popup Card

Tri-Level Popup Card

Mountain and Valley folds on the Popup Card

Glue the Popup Card to the Backing Card

Now you are ready to  glue the top side of the popup card to the inside top of the backing card. Add glue only to the back side of the top portion of the popup card. Avoid getting glue on any of the pillars, so that they can pop up properly. Line up the center fold of the popup card into the center fold of the backing card, glue side up. Next, carefully close the backing card over the popup card. Press firmly in place until the glue is dry.

Turn the card over, open the backing card, and apply glue to the white popup card. Again, apply glue only around edges of the card, making sure that you do not get any glue on the popup pillars. Close the card and press down until the glue is dry. Now you can open your card and inspect it to make sure that it folds open and closed correctly.

Tri-Level Popup Card

Print and Cut Some Clipart

After you have cut out the pieces for your card, and assembled it, you can decorate your Tri-Level Popup Card for any occasion. Simply add the decorative elements to the panels that pop up, as well as on top and bottom inside of the card, and the front of the card. You can add the titles and sentiments of your choice. Here is how I decorated my Tri-Level Popup Card on the inside. I used some clipart posted for free download this week from DesignBundles.  There are so many designs from which to choose. These are the design pieces that I used. Size your design pieces to fit the card. The widest pieces should be no wider than 5″ wide in order to fit well on the card. Duplicate pieces that you would like to use as layers over the base designs.

Create a 3D Decoupage Effect by Layering Pieces

Cutting two of each design pieces will give you the option to layer pieces for a 3D Decoupage effect. You can see a video tutorial on how to do this using a Pazzles Cutter with the Pazzles InVue software, or using Make The Cut software. I use the Pazzles Software when creating files for use with Cricut Explore or Cricut Maker, and Make The Cut software  for use with Scan N Cut , KNK Zing, Cameo, and older Cricut machines. The two wider pieces are downloaded as bouquets. Individual flower elements are cut and layered over the flowers in the bouquets to give the design more depth.

Shape Your Printed Flower and Butterfly Pieces

To get a dimensional look with your printed designs, use Flower Shaping Tools and a foam mat. Use a medium size embossing tool on the back sides of the printed flower shapes. Tap the tip of the embossing tool on the back side of each petal, and roll in circles in the center of each flower to give the edges some life. Turn the flower over on the foam mat, and press the embossing tool firmly in center. Shape the larger bouquets in similar fashion. Put a dot of glue on the center back side of the flower, and place it over the corresponding flower in the bouquet. Hold in place until the glue is dry. Repeat with as many layers as you like. You may add small lines of glue on your design pieces, then add some glitter to them to make them sparkle.

Tri-Level Popup Card

Butterflies and Flowers Clipart from DesignBundles

Decorate the Inside of the Tri-Level Popup  Card

You are now ready to glue your 3D decoupage designs onto the popup card.

Tri-Level Popup Card

Decorated Tri-Level Popup Card

Decorate the Outside of the Tri-Level Popup Card

And this is the outside of my tri-level popup card, decorated as a card of encouragement for friends who are having a hard time right now. I used some paper from  Heartfelt Creations Love Collection. I also used the small magnolia flower from our Free Resource Library on the front of the card. You can use some of the same paper you used for the mats on the popup card, to create a mat for your chosen sentiment. Add some decorative elements such as the Small 3D Magnolia flower, and tiny pearl stickers. Or you can use other decorative elements that you have on hand.

Tri-Level Popup Card

Outside view of decorated Tri-Level Popup Card.

Please share your decorated cards with us.

 

 

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

If you found this post helpful, please share, comment, and like  with your friends on Facebook, Twitter, Instagram, YouTube, and groups that you are in. Send them here to get all the details, and free resources.

Thanks!

Julie, cuttercrafter.com

How to Use the Regal Split Monogram Font

Learn to use the Regal Split Monogram Font in your cutter software to create lovely personalized gifts for weddings, anniversaries, and other occasions. You will find the FREE font in my Free Resource Library.

Regal Split Monogram

Split Regal Monogram on a Ceramic Tile

Supplies Needed 

Please note: Some affiliate links may be used in this post. I am affiliated only with products that I use. When you purchase products using my affiliate links, it does not cost you any more, but I will share some commission. Thanks!

Regal Split Monogram font in TTF format from the Free Resource Library

12″ square ceramic tile
outdoor vinyl 12″ square
12″ square vinyl transfer tape
Alcohol wipe
Vinyl Pick Tool for weeding
Squeegee Tool

 

How to Download and Install the Regal Split Monogram Font

To use the Split Regal Monogram font, you will need to first download it. You can get the zipped font from my Free Resource Library. Save the zipped file to your computer. Double click on the saved file, and select Extract All. Now you can right click on the extracted font, and select Install. The font will be installed into your computer’s system fonts folder, and will be available for you to use in any software that allows use of True Type Fonts. You can use it in your cutter software, just as you use any other font.

How to use the Regal Split Monogram Font in your Cutter Software

Once the Regal Split Monogram Font is installed in your computer’s system fonts folder, you can access it from your cutter software. Select the font in your cutter software by clicking on the T. Scroll through the font list to the R fonts. Select the Regal Split Monogram1.ttf font. Now type the capital letter you wish to use for the monogram. The design for that letter should appear on your screen. Resize the design to 10″ with the aspect ratio locked. If your project will be smaller or larger, size the monogram to fit. Since my tile is 12″ square, I chose to size my monogram to 10″. This allows for some room under the monogram for additional text.

Using fonts in each software is slightly different, so I have made some video tutorials on how to use this Regal Split Monogram Font in the most popular cutter software programs. Click on the software name to view the video.

Cricut Design Space

Brother Canvas Workspace – Scan N Cut

Silhouette Studio

Pazzles InVue

Make The Cut

Sure Cuts A Lot

Adding Custom Text to the Regal Split Monogram

There is a space in the middle of the monogram for you to add customized text to the design. You will need to select a font from your collection for this text. I used Caslon BD BT for my text. Upper case letters may work easiest, although I used upper and lower case letters for this particular project. After you have selected the font you would like to use for the remainder of the project, type your text. I used the last name of the couple for whom I made this tile plus the word “Family” in the space in the middle of the monogram.

Resize Your Custom Text

Resize your text to fit the space in the middle. You need to unlock the sizing tool, and drag the text to fit the available width and height. You may slightly overlap the top edge and bottom edge of the text with the bars of the two sections. Then select All (Ctrl+A) and weld all pieces together. Another way to do this is to make the text slightly smaller than the opening in the middle of the monogram. The text can fit in between the two parts of the monogram. But I think the welded version is easier to weed and apply.

Adding Custom Text Below the Regal Split Monogram

You can leave space below the monogram design where you can add additional text such as an important date. My project is a wedding gift for friends, so I added their wedding date under the monogram design. I used the same font that I used in the middle of the Monogram. Once you have added the text of your choice, resize it to the same width you used for the monogram design. You can change the height of the text to fit your available space.

Save Your Completed Monogram Design

Next, give your design a name, and save the file in your software. I like to save the design before I weld the customized text, so that the design will be ready to use for another gift. But once the design is saved, I weld overlapping letters. It is also a good idea to group everything together. But if you are using Cricut Design Space, rather than grouping, you should select all, right click, and select Attach. This keeps all of the design together when you go to cut your project.

Cutting your Regal Split Monogram Design

Be sure to do a test cut on your vinyl before cutting the large design. See the post on Performing a Test Cut . You need a very accurate blade depth and cutting pressure for this project. Make sure that your blade cuts cleanly through the vinyl. The blade should NOT cut through the backing material on the vinyl. If the cutting pressure is inadequate, you will have an extremely difficult time weeding the vinyl that will not be used on your project. Too much pressure may also cause bunching and tearing of your vinyl. Use a slower cutting speed, as the monograms contain some very intricate, fine lines.

Regal Split Monogram

Cut the vinyl. Notice the test cuts in the lower right corner. The first two tests cut all the way through the backing.

Weeding Your Regal Split Monogram

Weeding involves removing all of the vinyl that you do NOT want to place on your tile. I put boxes around the text at the bottom and around the main monogram design before cutting, so that weeding was a bit easier. Use a sharp, pointed object to lift the unwanted outside vinyl pieces away from the backing. Use scissors to trim away sections of the vinyl that you are pulling away. Don’t allow vinyl pieces to attach themselves to portions of the design that will be placed on your tile. After you remove the large outer pieces, work very carefully to remove the tiny pieces inside of letters and designs. Be careful not to lift any of the design pieces away from the backing.

Regal Split Monogram

Weeded vinyl still on the backing.

Apply Vinyl Transfer Tape to the Weeded Vinyl

Apply a 12″x 12″ piece of vinyl transfer tape over the cut and weeded vinyl design, a little bit at a time. Avoid getting air trapped between tape and weeded design. Pull away the backing material slowly, while pressing down on the transfer material from the top.

Regal Split Monogram

Apply vinyl transfer tape over the weeded vinyl a little at a time.

Regal Split Monogram

Use a squeegee tool to burnish the transfer tape securely to the vinyl design.

Use a squeegee tool firmly across the front of the design to remove all air bubbles and wrinkles. Rub firmly on front and back of design to get the vinyl pieces to stick to the transfer paper. At the same time you want the backing to release the vinyl pieces. Check the front and back of your design to make sure that everything is firmly in place where it belongs on the transfer tape. This is the time to fix any crooked pieces of vinyl.

Pull up on a top corner of the transfer tape. Make sure that the cut vinyl pieces stick to the transfer paper as you slowly peel it away from the backing.

Clean the Tile and Apply the Vinyl Design

Remove all dirt and oils from the tile. Use an alcohol wipe to clean the entire surface so that the vinyl will stick to it.

Regal Split Monogram

Clean Tile

The large 12″ square design may want to jump onto the tile before you are ready. Once this vinyl sticks to the tile, it will NOT want to come up. So it is very important to place the vinyl exactly where you want it to be the first time.

Regal Split Monogram

Start placing the vinyl on the tile.

Place the backing paper over most of the tile to prevent the design from sticking to the tile prematurely. Place the lower edge of the design where you want it on the tile. Use the squeegee to remove bubbles and apply the vinyl design smoothly to the tile. Move the backing back little by little, as you press the cut vinyl to the tile. Inspect the vinyl to make sure that all air bubbles and wrinkles are smooth and flat to the tile surface. If you have some bubbles, use the squeegee to move the bubbles to the edges of the cut design. You may use a heat tool to remove stubborn bubbles or wrinkles. Poke smaller bubbles with a needle or tip of your pointed tool to let the air escape.

Remove the Vinyl Transfer Material

Once all of the vinyl pieces are in place on the tile, slowly peel back the transfer material 180 degrees over itself to remove it. Make sure that the vinyl pieces stick to the tile as you peel away the transfer material.

Regal Split Monogram

Remove the Transfer tape.

Check your vinyl to make sure it is all secure on the tile. You special gift is now ready to give. The vinyl will last for many years. Your project is sure to be a blessing for its recipient.

 

 

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

Love,

Julie, cuttercrafter.com

Tips for Cutting Basswood on the Cricut Maker

Here are my tips to cut basswood on the Cricut Maker while making a lovely 3D Family Tree bursting with small magnolia flowers!

Cut Basswood

3D Basswood Tree decorated with names on hearts and 3D Magnolia Flowers.

Supplies Needed to Make the 3D Family Tree

Please note: Some affiliate links may be used in this post. I am affiliated only with products that I use. When you purchase products using my affiliate links, it does not cost you any more, but I will share some commission. Thanks!

One Basswood sheet 3/32″ x 8″ x 24″
Cricut Maker
Knife Blade holder and blade for Cricut Maker

Cricut Strong Grip Mat
Blue painters tape or masking tape
3D  Family Tree design by JenniferMaker.

Glue that dries quickly.
Heartfelt Creations 3D Rose Shaping mold 
Magnolia Flower Cutting File from the Free Resource Library
Cricut Printable Sticker Paper

Hot Glue Gun and glue sticks

 

Cricut recommends using basswood no thicker than 1/6″, but all I had was 3/32″ basswood. I used it to cut a lovely free 3D  Family Tree design by JenniferMaker.

Tips for Cutting Basswood on Cricut Maker

3D Basswood Tree

Preparation for Using the Knife Blade to Cut Basswood

First, If you have the Cricut Maker, order the Knife blade, and an extra blade. Basswood was hard for me to find locally. You may have to order some online. The other thing that would be good to order is the 2mm chipboard for the Maker. I noticed that this is an excellent quality chipboard. Not all chipboard is created equally. Some shreds easier than others, and cuts poorly. This chipboard is thick, firm, and a good cutting quality. It measures only 11″x11″ . Thicker media for cutting with the knife blade needs to be no wider than 11″.

After you receive your new knife blade, be sure to follow the instructions for its proper use. You need to calibrate the knife blade in the Cricut Maker machine. This process is easy  and quick. Then, move the white star wheels on the roller bar over to the right. I neglected to do this, and the wheels marked up the length of my wood. Do some small test cuts! See my post on how to make test cuts.

Cuts using the knife blade need to be no smaller than 3/4″, or about the width of a pencil. A few pieces of my 3D tree broke after removing them from the mat because they were on the thin side. Basswood is more sturdy than balsa wood, but it can split if you are not very careful handling it while removing it from the mat.

Use the heavy tack mat, and use painter’s tape or masking tape on the edges to keep the wood in place during cutting.

Cut Basswood with the Knife Blade

Heavy media takes many passes, and may take a very long time. Thick basswood required about 14-15 passes. The 3D tree took two hours to cut. There were two  large pieces to cut, and each piece took an hour. Stay near the machine during the cut, as the blade did get stuck about 4 times on each of the pieces. When the blade runs into tiny pieces of “dust”, cutting stops, allowing you to brush away the debris. You click on the C button to resume the cut at this point. No time is lost, and the machine does not miss any steps in the process. Since I was cutting media that was thicker than what was recommended, that may have been part of the reason for the blade getting stuck so much. But the cuts were still perfect!

You do have the option to add extra passes, one at a time, after the cutting is done, in case the wood is not cut all the way through. You simply press on the C button on the machine to have it cut again. Do not do this too many times, as the knife is capable of cutting all the way through the mat.

To remove the cut pieces from the mat, remove the tape first. Then roll the mat away from the wood. You don’t want to bend the wood, because it can crack and split.

Assemble the 3D Basswood Tree

You cut two pieces. One of them has a slit at the top, and the other has a slit at the bottom. Handling very carefully, slide the piece with the slit in the bottom as far as it will go over the other piece that has the slit at the top. The pieces will fit together very snugly if you are using Basswood with 3/32″ thickness. The cut pieces are fragile. The tree will stand on its own if the two pieces are aligned correctly.

Cleaning the Mat

Using a scraper tool on the mat after cutting wood is not a good idea. The bits of wood can get caught in the grooves of the cuts in the mat, ruining it. It is recommended that you wash the mat and use a brush with a circular motion to get the tiny wood pieces off of the mat. Then you can let the mat dry, or wipe it down with a soft cloth or paper towel. My mat cleaned up nicely. The knife blade did produce some pretty deep cuts on the mat, though.

Decorate Your Cut Basswood Tree

You may decorate your cut basswood tree according to your plan for its use. I decided to make my tree into a 3D Family tree, with names of family members printed on sticker paper, cut into heart shapes. To do this, you can print the names on Cricut Printable Sticker Paper, and use your electronic  cutter to cut around the printed names in the shape of hearts. Be careful not to cut through the backing sheet of the sticker paper. Performing a test cut on the sticker paper before proceeding is important.

Next,  adhere the heart stickers to the assembled tree. There are 72 small hearts onto which you may place stickers. Add  small  magnolia flowers on the tree branches. This is  a smaller version of the flower used on the lovely peony gift basket. Assembly of the small magnolia flowers is very similar to the peony flowers on the gift basket.

Instead of shaping the small flowers as a peonies with small beads in the centers, shape them as  more open Magnolia flowers. To do this, Instead of using the 3D Floral Basics  Shaping Mold from Heartfelt Creations, use their 3D Rose Shaping Mold. Use two petal layers and one leaf layer for each flower you wish to place on the tree. I used 32 flowers on my 3D tree, so I needed 72 petal layers. Use quick drying glue inside of one of the petals, and insert the other with petals alternating. Shape the leaf layer, add some glue to the center, and place the petal layers in the center of the leaf layer. Adhere the flowers to the tree branches so that they do not obscure any of the printing on the heart stickers,  using a dot of  hot glue on the back of each flower.

 

Cut Basswood

3D Basswood Tree decorated with names on hearts and 3D Magnolia Flowers.

 

You can use this lovely 3D Family Tree design as a nice table centerpiece, or decor for a special event. It can be a part of a 3D village, or it can be a special gift. For weddings you could have each guest sign a blank heart sticker, then you can place the stickers on the tree later. This idea would also work for baby showers or wedding showers. Another idea is to use this as a necklace organizer. Use colors and decorations to match the theme of your special event!

Get the FREE CUT FILES FOR THE Small Magnolia Flower 

You can get the SVG cut files for the Small Magnolia Flower as well as  some of my other FREE SVG projects from my FREE Resource Library.

 

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

Love,

Julie, cuttercrafter.com

Make A Fabric Doily Bonnet with 3D Fabric Flowers

You can make a fabric doily bonnet with 3D Fabric Flowers suitable for Easter, weddings, parties, and special events. Do it yourself to create a designer bonnet in the color scheme for your event. Use your electronic craft cutter to create a lovely craft project. This bonnet is made entirely of fabric and ribbon. Even the 3D flowers on top of the bonnet are made of fabric

Fabric Bonnet with 3D Flowers

Fabric Bonnet with 3D Flowers

Supplies

Electronic Craft Cutter

SVG Cutting File

Fabric Mat
Brayer
1 yard Wired ribbon 2.5″ wide
Cotton Batiks Fabric 1/3 yard from Vogue Fabrics
Low Temp Glue Gun
¼” elastic – 12”
Low Temp Glue Sticks
1/2″ Curling Iron
Terial Magic Fabric Stabilizer
2 Gallon Ziplock baggie
Iron
Ironing Board
Pressing Cloth

Assembly Instructions

  • Prepare the Fabric.

Place the fabric in a two-gallon Ziplock baggie.

Spray enough Terial Magic Fabric Stabilizer on the fabric in the baggie to saturate the fabric.

Allow to dry until just barely damp.

Place a pressing cloth on an ironing board. Place the damp fabric on the pressing cloth. Place another pressing cloth over the damp fabric.

Set the iron to a high cotton setting without steam.

Iron the fabric until it is dry and stiff.

Cut the Stiffened Fabric

Import the SVG cutting file into your cutter software. Place the stiffened fabric on an extra tacky cutting mat. Use a brayer over the entire surface of the fabric to ensure that it is securely adhered to the mat. Use a new blade in your cutter or one that has only been used for cutting fabric. Perform a test cut to determine the best pressure and blade extension to use for cutting this project. Use two passes and a slow cutting speed when cutting fabric. Cut the doily first. Then cut the flowers.

Assemble the Flowers

Layer 1, Bud – Put hot glue along the side edges of one of the flower petals, and wrap these petal edges to the edges of a petal across from it to form a bud. Add hot glue to the sides of another petal, and place around the bud. Add hot glue to the final petal edges, and place it around the bud.

Layer 2. Place some hot glue in the center of another flower layer, and place the bottom of the bud in the center of this flower layer. Add some hot glue half-way up each of the petals and glue to the bud.

Layer 3 Add some glue to the bottom of this flower layer, and place in the center of another flower layer. Add hot glue only to the base of each of petals on this layer, and press up around the previous layers.

Layer 4 Repeat instructions for layer 3.

Layer 5 Place a dot of glue in the center of the final layer. Place the bud and previously added layers to the center of this final layer. Do not add hot glue to the petals on this layer.

Center Bud piece –  Curl the single petal around itself to form a tiny cone. Place hot glue on the inside tip and place inside of the flower.

Use a hot  curling iron to Curl each of the two sides of each petal towards the outside of the flower. Add more hot glue if needed to form the finished flower. You will need three finished flowers for this project.

Assemble the fabric doily bonnet with 3D Fabric Flowers

Glue the flowers to the center of the ribbon, and glue the ribbon to the center of the cut doily.

3D Fabric Flowers

Finished fabric flowers glued to ribbon .

Glue the piece of elastic near the edge of each side of the bonnet. This elastic will go behind the ears, and under the hair to hold the bonnet in place. Curl the long edges of ribbon to hang down the sides of the bonnet.

Fabric bonnet with 3D flowers

Curled ribbon hangs down the sides.

Here is a top view of the fabric doily bonnet with 3D Fabric Flowers.

Doily Bonnet with 3D Fabric Flowers

Top View of the bonnet with 3D Fabric Flowers

Your DIY fabric doily bonnet with 3D Fabric Flowers is now ready to use for Easter, weddings, parties, and special events. It makes a lovely gift accessory! My little friend loved wearing her new hat for Easter!

 

Would you like to see some of my FREE SVG projects? Check them out in my FREE Resource Library.

 

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

loading
×

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below. If you already have your password, enter the resource library here. Forgot your password? I put the password at the bottom of nearly all of my emails. But if you can’t find one of my emails to you, you can either fill out the form above again or email me at hello@cuttercrafter.com Password Tip: I recommend you copy and paste the password in to avoid any accidental mistakes. If you ever forget your password, please email hello@cuttercrafter.com Not working? If you enter the password and the same page refreshes, without any contents, that means you put in the wrong password. Double-check your email, copy the password, and paste it in to the link above. Still not working? I promise the password works—I haven’t changed it since I opened the library.   Try the copy/paste method again and make sure the URL you are going to has https at the start of it (that’s a secure page and it makes a difference). If that still isn’t working, try a different web browser.