decoration decoration decoration
decoration
leaf leaf leaf leaf leaf
decoration decoration

How to Use the Regal Split Monogram Font

Learn to use the Regal Split Monogram Font in your cutter software to create lovely personalized gifts for weddings, anniversaries, and other occasions. You will find the FREE font in my Free Resource Library.

Regal Split Monogram

Split Regal Monogram on a Ceramic Tile

Supplies Needed 

Please note: Some affiliate links may be used in this post. I am affiliated only with products that I use. When you purchase products using my affiliate links, it does not cost you any more, but I will share some commission. Thanks!

Regal Split Monogram font in TTF format from the Free Resource Library

12″ square ceramic tile
outdoor vinyl 12″ square
12″ square vinyl transfer tape
Alcohol wipe
Vinyl Pick Tool for weeding
Squeegee Tool

 

How to Download and Install the Regal Split Monogram Font

To use the Split Regal Monogram font, you will need to first download it. You can get the zipped font from my Free Resource Library. Save the zipped file to your computer. Double click on the saved file, and select Extract All. Now you can right click on the extracted font, and select Install. The font will be installed into your computer’s system fonts folder, and will be available for you to use in any software that allows use of True Type Fonts. You can use it in your cutter software, just as you use any other font.

How to use the Regal Split Monogram Font in your Cutter Software

Once the Regal Split Monogram Font is installed in your computer’s system fonts folder, you can access it from your cutter software. Select the font in your cutter software by clicking on the T. Scroll through the font list to the R fonts. Select the Regal Split Monogram1.ttf font. Now type the capital letter you wish to use for the monogram. The design for that letter should appear on your screen. Resize the design to 10″ with the aspect ratio locked. If your project will be smaller or larger, size the monogram to fit. Since my tile is 12″ square, I chose to size my monogram to 10″. This allows for some room under the monogram for additional text.

Using fonts in each software is slightly different, so I have made some video tutorials on how to use this Regal Split Monogram Font in the most popular cutter software programs. Click on the software name to view the video.

Cricut Design Space

Brother Canvas Workspace – Scan N Cut

Silhouette Studio

Pazzles InVue

Make The Cut

Sure Cuts A Lot

Adding Custom Text to the Regal Split Monogram

There is a space in the middle of the monogram for you to add customized text to the design. You will need to select a font from your collection for this text. I used Caslon BD BT for my text. Upper case letters may work easiest, although I used upper and lower case letters for this particular project. After you have selected the font you would like to use for the remainder of the project, type your text. I used the last name of the couple for whom I made this tile plus the word “Family” in the space in the middle of the monogram.

Resize Your Custom Text

Resize your text to fit the space in the middle. You need to unlock the sizing tool, and drag the text to fit the available width and height. You may slightly overlap the top edge and bottom edge of the text with the bars of the two sections. Then select All (Ctrl+A) and weld all pieces together. Another way to do this is to make the text slightly smaller than the opening in the middle of the monogram. The text can fit in between the two parts of the monogram. But I think the welded version is easier to weed and apply.

Adding Custom Text Below the Regal Split Monogram

You can leave space below the monogram design where you can add additional text such as an important date. My project is a wedding gift for friends, so I added their wedding date under the monogram design. I used the same font that I used in the middle of the Monogram. Once you have added the text of your choice, resize it to the same width you used for the monogram design. You can change the height of the text to fit your available space.

Save Your Completed Monogram Design

Next, give your design a name, and save the file in your software. I like to save the design before I weld the customized text, so that the design will be ready to use for another gift. But once the design is saved, I weld overlapping letters. It is also a good idea to group everything together. But if you are using Cricut Design Space, rather than grouping, you should select all, right click, and select Attach. This keeps all of the design together when you go to cut your project.

Cutting your Regal Split Monogram Design

Be sure to do a test cut on your vinyl before cutting the large design. See the post on Performing a Test Cut . You need a very accurate blade depth and cutting pressure for this project. Make sure that your blade cuts cleanly through the vinyl. The blade should NOT cut through the backing material on the vinyl. If the cutting pressure is inadequate, you will have an extremely difficult time weeding the vinyl that will not be used on your project. Too much pressure may also cause bunching and tearing of your vinyl. Use a slower cutting speed, as the monograms contain some very intricate, fine lines.

Regal Split Monogram

Cut the vinyl. Notice the test cuts in the lower right corner. The first two tests cut all the way through the backing.

Weeding Your Regal Split Monogram

Weeding involves removing all of the vinyl that you do NOT want to place on your tile. I put boxes around the text at the bottom and around the main monogram design before cutting, so that weeding was a bit easier. Use a sharp, pointed object to lift the unwanted outside vinyl pieces away from the backing. Use scissors to trim away sections of the vinyl that you are pulling away. Don’t allow vinyl pieces to attach themselves to portions of the design that will be placed on your tile. After you remove the large outer pieces, work very carefully to remove the tiny pieces inside of letters and designs. Be careful not to lift any of the design pieces away from the backing.

Regal Split Monogram

Weeded vinyl still on the backing.

Apply Vinyl Transfer Tape to the Weeded Vinyl

Apply a 12″x 12″ piece of vinyl transfer tape over the cut and weeded vinyl design, a little bit at a time. Avoid getting air trapped between tape and weeded design. Pull away the backing material slowly, while pressing down on the transfer material from the top.

Regal Split Monogram

Apply vinyl transfer tape over the weeded vinyl a little at a time.

Regal Split Monogram

Use a squeegee tool to burnish the transfer tape securely to the vinyl design.

Use a squeegee tool firmly across the front of the design to remove all air bubbles and wrinkles. Rub firmly on front and back of design to get the vinyl pieces to stick to the transfer paper. At the same time you want the backing to release the vinyl pieces. Check the front and back of your design to make sure that everything is firmly in place where it belongs on the transfer tape. This is the time to fix any crooked pieces of vinyl.

Pull up on a top corner of the transfer tape. Make sure that the cut vinyl pieces stick to the transfer paper as you slowly peel it away from the backing.

Clean the Tile and Apply the Vinyl Design

Remove all dirt and oils from the tile. Use an alcohol wipe to clean the entire surface so that the vinyl will stick to it.

Regal Split Monogram

Clean Tile

The large 12″ square design may want to jump onto the tile before you are ready. Once this vinyl sticks to the tile, it will NOT want to come up. So it is very important to place the vinyl exactly where you want it to be the first time.

Regal Split Monogram

Start placing the vinyl on the tile.

Place the backing paper over most of the tile to prevent the design from sticking to the tile prematurely. Place the lower edge of the design where you want it on the tile. Use the squeegee to remove bubbles and apply the vinyl design smoothly to the tile. Move the backing back little by little, as you press the cut vinyl to the tile. Inspect the vinyl to make sure that all air bubbles and wrinkles are smooth and flat to the tile surface. If you have some bubbles, use the squeegee to move the bubbles to the edges of the cut design. You may use a heat tool to remove stubborn bubbles or wrinkles. Poke smaller bubbles with a needle or tip of your pointed tool to let the air escape.

Remove the Vinyl Transfer Material

Once all of the vinyl pieces are in place on the tile, slowly peel back the transfer material 180 degrees over itself to remove it. Make sure that the vinyl pieces stick to the tile as you peel away the transfer material.

Regal Split Monogram

Remove the Transfer tape.

Check your vinyl to make sure it is all secure on the tile. You special gift is now ready to give. The vinyl will last for many years. Your project is sure to be a blessing for its recipient.

 

 

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below.

If you already have your password, enter the resource library here.

Love,

Julie, cuttercrafter.com

Tags: Anniversary, Cricut, cutter, cuttercrafter, DIY, Electronic cutter, Explore, Expression, Gazelle, Gift, Home Decor, KNK, Make The Cut, Maker, MTC, Pazzles, Scan N Cut, Silhouette, Silver Bullet, Sure Cuts A lot, SVG, Tutorial, wedding, WPC

LEAVE A REPLY

This site uses Akismet to reduce spam. Learn how your comment data is processed.

loading
×

>> HOW TO ENTER THE FREE RESOURCE LIBRARY <<

This resource library is open to everyone for free. All you need is the password to get in, which you can get by filling out the form below. If you already have your password, enter the resource library here. Forgot your password? I put the password at the bottom of nearly all of my emails. But if you can’t find one of my emails to you, you can either fill out the form above again or email me at hello@cuttercrafter.com Password Tip: I recommend you copy and paste the password in to avoid any accidental mistakes. If you ever forget your password, please email hello@cuttercrafter.com Not working? If you enter the password and the same page refreshes, without any contents, that means you put in the wrong password. Double-check your email, copy the password, and paste it in to the link above. Still not working? I promise the password works—I haven’t changed it since I opened the library.   Try the copy/paste method again and make sure the URL you are going to has https at the start of it (that’s a secure page and it makes a difference). If that still isn’t working, try a different web browser.
shares
%d bloggers like this: